Instruction/ maintenance manual of the product WCAM71 ST & T
Go to page of 16
茂發團隊 © 2003 ST&T Group. All rights reserved . 1 Web Camera USER GUIDE for IP Camera WCAM71 Version 0.9 2004,06,24.
茂發團隊 © 2003 ST&T Group. All rights reserved . 2 Chapter One: Introduction ......................................................... 3 Features ...............................................................................................
茂發團隊 © 2003 ST&T Group. All rights reserved . 3 Chapter One: Introduction Features Easy to install, Plug and Play Remote surveillance via network Embedded Web Server to watch the video over the internet IP assignment via Web Page / Utility .
茂發團隊 © 2003 ST&T Group. All rights reserved . 4 Package Content IP camera WCAM71 5V DC / 1A Power Adapter Crosslink cable (RJ45) System Requirement Microsoft Windows 98 or later version. Microsoft Internet Explor er 6.
茂發團隊 © 2003 ST&T Group. All rights reserved . 5 Chapter Two: Hardware of IP camera WCAM71 The appearance of IP camera WCAM71.
茂發團隊 © 2003 ST&T Group. All rights reserved . 6 Port and LEDs RJ-45: IP camera WCAM71 has one RJ -45 port for Ethernet connection. DC Power: IP camera WCAM71 use 5V DC / 1A Power Adapter . Power LED: It is ON w hen a valid connection occurs.
茂發團隊 © 2003 ST&T Group. All rights reserved . 7 Chapter Three: Connecting IP Camera WCAM71 This Chapter contains step-by-step instruct ion to connect IP camera WCAM71P to your network. Local Network (LAN) 1. Plug in the power supply . 2. Connect to your network with a RJ-45 Cable.
茂發團隊 © 2003 ST&T Group. All rights reserved . 8 7. Click on your TCP/IP protocol then click on < properties >. Under < Specify an IP addre ss > enter the correct IP address and Subnet mask. Then restart your Network connection.
茂發團隊 © 2003 ST&T Group. All rights reserved . 9 Chapter Four: Browser This Chapter contains information about how to configure your IP camera WCAM71 and how to see the image. Login Entering IP Camera WCAM71 IP address in your browser, you will be able to access the homepage.
茂發團隊 © 2003 ST&T Group. All rights reserved . 10 Vi e w If login is successful, the image and functi on buttons will be showed in the browser. 1. Show real-time image, or 2. Press “Image Parameter”, link to the image param eter setting page.
茂發團隊 © 2003 ST&T Group. All rights reserved . 1 1 Change Password Input old password and new p ass word, and then press “Save” button. The p as sword will be changed, and return to V iew page. Image Parameter Press “Image Parameter” to set image parameters.
茂發團隊 © 2003 ST&T Group. All rights reserved . 12 Image parameters include resolution, anti-flicker , quality , and brightness. Network Configuration There are two ways to set network confi guration – “Fixed IP” and “ADSL PPPoE”.
茂發團隊 © 2003 ST&T Group. All rights reserved . 13 If using a fixed IP setting, please select “Fixed IP”, input IP Address, Gateway , Subnet Mask, and DNS. Then press “Save” to change network setting. The new setting takes ef fect immediately , so you must connect to new IP address.
茂發團隊 © 2003 ST&T Group. All rights reserved . 14 If using ADSL PPPoE, please select “ADSL PPPoE”, input ADSL User’s ID, ADSL User ’s Password, E-mail, and SMTP Mail Server . After pressing “Save” button, IP camera will send a new IP address to the e-mail that you set.
茂發團隊 © 2003 ST&T Group. All rights reserved . 15 Chapter Five: Applications 1. Environment surveillance 2. House security 3. Baby/Home care 4.
茂發團隊 © 2003 ST&T Group. All rights reserved . 16 Chapter Six: FAQ Q: IP Camera WCAM71 cannot show image. A: 1. Reset IP camera WCAM71 and re-login. 2. T ry to set image parameters as QVGA (320x240) and low quality . Sometimes the condition of network is bad, and the image is not complete.
An important point after buying a device ST & T WCAM71 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ST & T WCAM71 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ST & T WCAM71 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ST & T WCAM71 you will learn all the available features of the product, as well as information on its operation. The information that you get ST & T WCAM71 will certainly help you make a decision on the purchase.
If you already are a holder of ST & T WCAM71, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ST & T WCAM71.
However, one of the most important roles played by the user manual is to help in solving problems with ST & T WCAM71. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ST & T WCAM71 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
