Instruction/ maintenance manual of the product DX8 Spektrum
Go to page of 42
SD Logo is a trademark of SD-3C, LLC Instruction Manual Bedienungsanleitung Manuel d’utilisation Manuale di istruzioni Manual de Instrucciones The Leader in Spread Spectrum Technology.
.
SD Logo is a trademark of SD-3C, LLC Instruction Manual 8-Channel DSM Radio System with Integrated T elemetry for Airplanes and Helicopters The Leader in Spread Spectrum Technology EN.
4 NO TICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby , Inc.
5 Spektrum’ s DX8 with Integrated T elemetry ...................................................... 6 Included Items ..............
6 The DX8 is Spektrum’ s first aircraft system that incorporates integrated telemetry .
7 The DX8 features a built-in multi-chemistry charger designed to charge 4-cell NiMH and 2-cell LiPo batteries at a charge rate of 200mAh.
8 .
9 .
10 .
11 .
12 Note: T o bind an aircraft with an electronic speed controller that powers the .
13 The Rang e T est fun ctio n re duces the pow er o utpu t. Th is a llow s fo r a range test to confi rm t he R F lin k is ope rati ng c orrec tly .
14 The Model Select function is used to change to a different model memory , typically when switching from the current model.
15 The Model Name function allows you to name a model using up to 10 characters. This makes identifying and selecting models much easier .
16 Press and hold the roller while turning on the transmitter .
17 Press and hold the roller while turning on the transmitter .
18 Verify that the current model displayed on this screen is the model you wish to copy . If not then see page 14 Model Select to access the desired model.
19 5. From the main screen rotate the roller to access the telemetry screen and verify the flight log data and receiver voltage displays.
20 Electric RPM Sensor The optional electric RPM sensor is designed to be used with any brushless motor . The sensor has two leads to attach to any two of the three motor wires.
21 T o Program a User Name In the Systems Settings screen rotate the roller to highlight User Name then press. Highlight the desired character position then press the roller to access that position.
22 The DX8 organizes the programming screens in two separate categories: System Setup Mode and Functions Mode.
23 With the transmitter on and the main or telemetry screen up, press the roller .
24 Rotate the roller to highlight Sw (switch) then press to access the switch options.
25 The Throttle Cut function allows you to shut off an engine with the T rainer switch, Gear switch or the Right or Left trimmer .
26 Rotate the roller to highlight EXPO then press the roller to access the Throttle Curve Expo function.
27 Rotate the roller to highlight Flap System then press. The Flap System defaults to Inhibit.
28 Highlight E-ring then press the roller to access the Electronic Cyclic Ring function.
29 Rotate the roller to adjust the selected point to the desired output position. Note the position on the graph at the left of the screen.
30 .
31 Rotate the roller to highlight T ail Cur ve then press. Highlight the desired flight mode at the bottom of the screen then press to select.
32 The Swashplate Mix typically corrects swashplate timing issues by mixing Aileron to Elevator and Elevator to Aileron.
33 Move the programmed master channel while observing the slave channel. The slave channel should move accordingly . The Offset function establishes the point at which the two mix rates converge.
34 Highlight Mode then press.
35 The Monitor screen displays the servo positions for each channel graphically and numerically . This is useful to verify programming functions, trim settings, mix directions, etc.
36 Ser vo Precautions •Donotlubricateservogearsormotors.
37 W ARRANTY AND REP AIR POLICY Warranty Period Exclusive Warranty- Horizon Hobby , Inc.
38 our facility . An Online Repair Request is available at www .horizonhobby .com http://www.horizonhobby . com under the Repairs tab.
39 .
40 Note: Cages have been removed for clarity. Step 4. Locate the gimbal that currently has the throttle friction engaged (mode 2 is the right gimbal from the rear).
41 When changing modes that swap throttle and elevator positions it’ s necessary to recalibrate the sticks.
42 The Flight Log (optional) is compatible with the AR8000 receiver .
An important point after buying a device Spektrum DX8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Spektrum DX8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Spektrum DX8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Spektrum DX8 you will learn all the available features of the product, as well as information on its operation. The information that you get Spektrum DX8 will certainly help you make a decision on the purchase.
If you already are a holder of Spektrum DX8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Spektrum DX8.
However, one of the most important roles played by the user manual is to help in solving problems with Spektrum DX8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Spektrum DX8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
