Instruction/ maintenance manual of the product MA3-4P Banner
Go to page of 6
Model MA3-4P: PNP (curr ent sour cing) output Banner MICRO-AMP ® module models MA3-4 and MA3-4P are modulated ampli- ers designed for use with the popular family of Banner high-performance remote sensors.
Beam Pattern OPPOSED Mode LR/PT200, 250, 300, and 400 opposed mode remote sensors are identical electronically and optically , and differ only in their housings. All are totally epoxy-encapsulated and use hermetically sealed glass lenses to eliminate condensation inside the optical chamber .
DIVERGENT Mode Long Range OPPOSED Mode Models/Dimensions Excess Gain Beam Pattern Range: 15 feet (4,5m) with BR T -3 retroreector T emp. range: -40 to +80°C SP300L Housing material: blue anodized aluminum SP300EL & SP300RL Range: 50 feet (15m) Effective Beam: .
Models/Dimensions SMB300 SP1000V CONVERGENT Mode Range: focus at 3.8 inches (96mm) T emp. range: -40 to +80 degrees C Housing material: black anodized aluminum DIFFUSE Mode Excess Gain Beam Pattern Ra.
FIBER OPTIC Mode glass ber optics The threaded barrel design of the LR400 and PT400 permit the con - nection of any Banner glass ber optic assembly by using two model FOF-400 ttings. The sensors are typically mounted through a 3/8 inch (10mm) diameter clearance hole, with the FOF-400 fittings threaded onto them after mount - ing.
Modulated remote sensors require specially designed cable for efcient sensor performance. Extension cable is available in 100 foot (30m) lengths. Extension Cable used with the compression ttings, at right, to achieve maximum protection to sensor cables.
An important point after buying a device Banner MA3-4P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Banner MA3-4P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Banner MA3-4P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Banner MA3-4P you will learn all the available features of the product, as well as information on its operation. The information that you get Banner MA3-4P will certainly help you make a decision on the purchase.
If you already are a holder of Banner MA3-4P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Banner MA3-4P.
However, one of the most important roles played by the user manual is to help in solving problems with Banner MA3-4P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Banner MA3-4P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
