Instruction/ maintenance manual of the product MA3 Banner
Go to page of 4
SUPPL Y VOL T AGE: 10 to 30V dc at less than 20 milliamps (ex- clusive of load); 10% maximum ripple. OUTPUT CONFIGURA TION: two open-collector NPN (current sinking) transistor (solid-state) switches; one normally open (light operate) and one normally closed (dark operate); 150 milliamps maxi- mum, each output.
Models SP100C and CCF are ideally suited to applications where depth of eld is critical. The emitter and receiver are both directed at a point 0.1 inch (2,5mm) ahead of the front surface. An aperture is included which, when attached, nar- rows the depth of eld (see curves, below).
Beam Pattern 3 Dimensions, TR-100 Mounting T rack "A" Di- mension 1" (25mm) 4" (10cm) 6" (15cm) 12" (30cm) Minimum number of slots 1 2 3 8 T rack Model TR100-1 TR100-4 TR100-6 TR100-12 PVC mounting track for MICRO-AMP components is available in 6 and 12 inch lengths for systems which use multiple components.
Banner Engineering Corp. 9714 10th A ve. No., Minneapolis, MN 55441 T elephone: (763) 544-3164 F AX (applications): (763) 544-3573 W ARRANTY : Banner Engineering Corporation warrants its products to be free from defects for one year .
An important point after buying a device Banner MA3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Banner MA3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Banner MA3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Banner MA3 you will learn all the available features of the product, as well as information on its operation. The information that you get Banner MA3 will certainly help you make a decision on the purchase.
If you already are a holder of Banner MA3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Banner MA3.
However, one of the most important roles played by the user manual is to help in solving problems with Banner MA3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Banner MA3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
