Instruction/ maintenance manual of the product SPL40 Soundstream
Go to page of 8
1 2 Ohm Nominal Component Speaker System OWNER’S MANUAL 40.pub page 1 Friday, September 10, 1999 21:04.
2 HARDWARE AND CONNECTOR PARTS LIST PROJECT SPL 6 SPL 40 Component Speaker System Congratulations on your purchase of the Soundstream SPL 40 Component Speaker System. When used with a high quality 2 ohm rated power amplifier, the SPL 40 will provide exceptional performance.
3 FEATURES LOCATION AND MOUNTING SPL 4 Midrange / Woofer The SPL 4 is an excellent performer with a combination of high sensitivity, solid bass and smooth response t hroughout the audible range.
4 Flush Mounting: 1) Cut a 2 1/16” (52mm) diameter hole thr ough the mounting surface. If the surface is covered with cloth or carpet, be careful not to tear or pull the material. Someti mes it is a good idea to peel the material away, and then trim it by hand.
5 1 / 4 ” 6 - 32 machine screw Flush mount cup Mounting surface Turn Clockwise to Lock FIGU RE 2 FIGURE 1 Spring clip Surface Mounting: 1) Drill one 5/16" diameter hole for the tweeter lead wires and two pilot holes for the mounting screws. 2) Attach the surface mount plate with two flat head screws.
6 INSTALLING T HE SPL 4 MIDRANGE/ WOOFER MOUNTING THE SPL 4X CROSSOVER The SPL 4 Midrange/Woofer can be mounted on the front or rear of a panel; gaskets are provided for both options. The bolt hole configuration will fit a variety of American, European and Asian OEM patterns making it ideal for direct placement.
7 TWEETER LEVEL CONTROL Tweeter Attenuation The SPL 40 system has been designed to provide optimum sound in a variety of installation locations. The provid ed crossover allows for 2 positions of tweeter level control, 0dB and - 3dB. A switch under the plastic crossover cover sets one of the two positions.
8 120 Blue Ravine Road Folsom California 95630 USA tel 916.351.1288 fax 916.351.0414 SPECIFICATIONS SPL 40 System Specifications Freque ncy Response 80 Hz - 20,000 Hz ±3dB Sensitivity 92 dB SPL at 1 meter (2.83 Volts) 98 dB SPL at .5 meter (2.
An important point after buying a device Soundstream SPL40 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Soundstream SPL40 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Soundstream SPL40 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Soundstream SPL40 you will learn all the available features of the product, as well as information on its operation. The information that you get Soundstream SPL40 will certainly help you make a decision on the purchase.
If you already are a holder of Soundstream SPL40, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Soundstream SPL40.
However, one of the most important roles played by the user manual is to help in solving problems with Soundstream SPL40. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Soundstream SPL40 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
