Instruction/ maintenance manual of the product TA-MR2ES Sony
Go to page of 20
2-514-603- 12 (1) System Integration 2CH Amplifier SONY TA-MR2ES (US) 2-514-603-12(1) 2004 Sony Corporation T A-MR2ES Installation Manual Owner’s Record The model and serial numbers are located on the rear panel. Record the model and serial numbers in the spaces provided below.
2 US SONY TA MR2ES (US) 2 514 603 12(1) WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet.
3 US SONY TA MR2ES (US) 2 514 603 12(1) T ABLE OF C ONTENTS Chapter 1 Getting Started Featur es 4 Unpacking 5 Parts and Controls 6 Chapter 2 Setting up the amplifier Installing the amplifier 8 Hooking.
4 US SONY TA MR2ES (US) 2 514 603 12(1) Chapter 1 Getting Started This chapter pr ovides you with information on the features and the parts and contr ols of the amplifier . Featur es The T A-MR2ES amplifier can be integrated into any multi-room entertainment system.
5 US Getting Started SONY TA-MR2ES ( US ) 2-514-603-12 (1) Unpacking The T A-MR2ES amplifier includes the following: • T A-MR2ES amplifier • AC power cord • Installation Manual (this manual) • Rack-mount brackets (2) • Screw (6) 01US03CH1-U.
6 US Getting Started SONY TA - MR2ES (US) 2 - 514-603 - 12(1) ON POWER IN USE.
7 US Getting Started SONY TA - MR2ES (US) 2 - 514 - 603 - 12(1) Rear panel of the amplifier IR TEST IR ID AUT O PO WER SELECTOR 12V TRIGGER IR REMOTE AUDIO R R L IN OUT IN IR IN 4 3 2 1T E S T 12V TRI.
8 US SONY TA-MR2ES (US) 2-514-603-12(1) Chapter 2 Setting up the amplifier This chapter pr ovides you with information on the amplifier regar ding installation, hookups and settings.
9 US Setting up the amplifier SONY TA-MR2ES (US) 2-514-603-12(1) If you install the amplifier in a closed cabinet, install two small box fans in the cabinet to provide continuous ventilation. Note Attach box fans also if you connect low-impedance speakers (less than 8 ohms nominal).
10 US Setting up the amplifier SONY TA-MR2ES (US) 2-514-603-12(1) Before hooking up the amplifier , be sur e the power cord is unplugged. Refer to the illustration below for the connector locations. IR REMOTE IR IN jack ( A ) Plug the output from an IR r eceiver into the IR REMOTE IR IN jack of the amplifier .
11 US Setting up the amplifier SONY TA-MR2ES (US) 2-514-603-12(1) Selecting the method to activate the amplifier There ar e three methods to activate the amplifier . Select the turn-on method by setting AUTO POWER SELECT OR as follows: – 12V TRIGGER When there is no voltage detected at the trigger input, the amplifier remains of f.
12 US Setting up the amplifier SONY TA-MR2ES (US) 2-514-603-12(1) Setting up the IR ID Y ou can set up the IR ID when the IR ID TEST switch is in the “ON” or “OFF” position. When the IR ID TEST is “ON” Select this setting to teach the six IR codes below to any IR-based controller .
13 US Setting up the amplifier SONY TA-MR2ES (US) 2-514-603-12(1) When the IR ID TEST is “OFF” Select this setting before you operate the amplifier . When the IR ID TEST switch is set to the “OFF” position, you can also make the setting below .
14 US SONY TA MR2ES (US) 2 514 603 12(1) Chapter 3 Oper ating the amplifier This chapter provides you with information on amplifier operation. Adjusting the maximum volume level Y ou can control the maximum volume level to avoid damaging your speakers by adjusting the variable attenuator screws behind the cover lid on the front panel.
15 US Operating the amplifier SONY TA MR2ES (US) 2 514 603 12(1) Clearing the amplifier’ s memory This procedur e is used to return the settings you have made to their factory defaults. Before clearing the amplifier ’s memory , be sure to set the variable attenuator to minimum.
16 US SONY TA MR2ES (US) 2 514 603 12(1) Chapter 4 Other Information This chapter pr ovides you with additional information that will help you understand and maintain your system.
17 US Other Information SONY TA MR2ES (US) 2 514 603 12(1) T r oubleshooting If you experience any of the following difficulties while using the amplifier , use this troubleshooting guide to help you to remedy the pr oblem. Should any pr oblem persist, consult your nearest Sony dealer .
18 US Other Information SONY TA MR2ES (US) 2 514 603 12(1) Specifications Continuous average power output (FTC): 35 W per channel min. RMS at 8 ohms, both channels driven from 20 Hz to 20 kHz with no more than 0.09 % THD. 40 W per channel min. RMS at 4 ohms, both channels driven from 20 Hz to 20 kHz with no more than 0.
19 US SONY TA MR2ES (US) 2 514 603 12(1) Other Information A AC IN 7, 10 AC power cord 7, 10 Adjusting volume 14, 15 ATTENUATOR L/R 6, 14 AUDIO IN jack 7, 10 AUDIO OUT jack 7, 10 AUTO POWER SELECTOR s.
20 SONY TA MR2ES (US) 2 514 603 12(1) Sony Corporation Printed in Malaysia 01US08BCOV-U.p65 11/30/04, 1:14 PM 20.
An important point after buying a device Sony TA-MR2ES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony TA-MR2ES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony TA-MR2ES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony TA-MR2ES you will learn all the available features of the product, as well as information on its operation. The information that you get Sony TA-MR2ES will certainly help you make a decision on the purchase.
If you already are a holder of Sony TA-MR2ES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony TA-MR2ES.
However, one of the most important roles played by the user manual is to help in solving problems with Sony TA-MR2ES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony TA-MR2ES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
