Instruction/ maintenance manual of the product CHS/2N Bakers Pride Oven
Go to page of 12
HOT FOOD DISPLAY CABINETS MODELS:- CHS/1N, CHS/2N,CHS/3N OPERATING INSTRUCTIONS.
1 CONTENTS SECTION P A G E W A R R A N T Y 2 I N T R O D U C T I O N 3 G E N E R A L N O T E S 3 KNOW YOUR “HOT SHOP” 4-5 O P E R A T I N G 6 - 7 H O L D I N G T I M E S 7 CLEANING & MAINTENAN.
2 WARRANTY Each appliance is despatched with a pre- paid warranty registration card, this card should be filled in at the time of installation. Please Note:- No warranty is given on gla ss/bulbs or quartz tubes.
3 OPERATING INSTRUCTIONS INTRODUCTION Thank you for deciding to purchase a “Hotshop” food display cabinet from BKI . Your “Hot Shop” food display has been de signed for the modern caterer and .
4 Know your “Hot Shop” Operator Control View S l i d i n g d o o r s Controls Data rating plate S e r i a l N u m b e r Water Drawer Rubber Feet Controls Temperature Controller Heater “ON” Mai.
5 CONTROLS Mains Power Switch :- Controls the light, fans and supplies power to the heating elements via the temperature controller. Temperature Controller :- (Simmerstat) Regulates cabinet temperatur.
6 OPERATING In order to comply with the Food Safety Act 1990 and the Food Safety (General Food Hygiene) regulations 1995, hot food must be kept at a temperature of at least 63.
7 OPERATING • IMPORTANT:- Always allow time for the cabinet to pre-heat before loading any food items. Keep sliding doors closed to retain heat after loading or unloading. • Check water drawer every 2-3 hours, carefully add fresh water to maintain correct level, Do Not Over Fill.
8 CLEANING & MAINTENANCE IMPORTANT:- This cabinet should be clean ed at the end of each working day. Always disconnect the cabine t from the power supply before the start of any cl eaning or maintenance. • Remove any food items left at the end of business.
9 The Front Curved glass and Side glass pa nels can be removed for maintenance or cleaning as follows: CURVED GLASS • Lift front curved glass section forwards from the top. (The front glass section is attached to the cabinet at the botto m by the aluminium strip).
10 TROUBLE-SHOOTING 1. Read and understand the Operating Instructions. 2. Clean the unit each day. 3. Refer to the troubleshooting guide if the unit does not operate properly. 4. Have only an authorised serviceman check and repair unit wh en needed PROBLEM CORRECTIVE ACTION Unit fails to operate 1.
11 GASTRONORM PANS & SPARE PARTS Contact your distributor or the spares department at BKI for spare gastronorm pans or replacement lam ps, quoting the following c ode numbers, check the app liance.
An important point after buying a device Bakers Pride Oven CHS/2N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bakers Pride Oven CHS/2N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bakers Pride Oven CHS/2N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bakers Pride Oven CHS/2N you will learn all the available features of the product, as well as information on its operation. The information that you get Bakers Pride Oven CHS/2N will certainly help you make a decision on the purchase.
If you already are a holder of Bakers Pride Oven CHS/2N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bakers Pride Oven CHS/2N.
However, one of the most important roles played by the user manual is to help in solving problems with Bakers Pride Oven CHS/2N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bakers Pride Oven CHS/2N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center