Instruction/ maintenance manual of the product PEGA-MSB1 Sony
Go to page of 48
4-662-841- 11 (2) Bluetooth™ Module Operating Instructions 2002 Sony Corporation PEGA-MSB1.
2 Owner’s Record The model number and serial number are located at the rear of the product. Record the model number and the serial number in the space provided below.
3 Declaration of Conformity Trade Name : SONY Model No. : PEGA-MSB1 Responsible Party : Sony Electronics Inc. Address : 680 Kinderkamack Road, Oradell, NJ 07649 USA Telephone No.
4 Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
5 • Sony, , CLI É , , CLI É GEAR, , , Jog Dial and Memory Stick are trademarks of Sony Corporation. • Palm OS and HotSync are registered trademarks of Palm, Inc. or its subsidiaries. Palm Desktop and HotSync logo are trademarks of Palm, Inc. or its subsidiaries.
6 Table of Contents Introduction ................................................................................................... 7 What You Can Do with this Bluetooth Module ....................................... 8 Names of Parts ................
7 Introduction This product is a Bluetooth communication module for Sony Personal Entertainment Organizer (mentioned as CLIÉ handheld after this) of the OS version 4.
8 What You Can Do with this Bluetooth Module Inserting this Bluetooth Module in your CLI É handheld allows you to perform wireless communication between your CLI É handheld and a Bluetooth compatible device without connecting them with a cable. Performing a HotSync operation You can perform a wireless HotSync operation (i.
9 Communicating between two CLIÉ handhelds Enjoying the supplied application “Reversi” You can play a game of Reversi, using two communicating CLI É handhelds. Install the Bluetooth Preferences utility and the Reversi application in the CLI É handhelds you use.
10 Names of Parts Bluetooth Module POWER indicator This indicator lights when the CLI É handheld is ready for Bluetooth communications. Accessories CD-ROM (1) Operating Instructions (1) Warranty card.
11 Inserting/Removing this Bluetooth Module Inserting this Bluetooth Module in your CLIÉ handheld Insert this Bluetooth Module in the memory stick slot of the CLI É handheld. Notes • Insert this Bluetooth Module straight in the memory stick slot of the CLI É handheld.
12 Removing this Bluetooth Module from your CLIÉ handheld After use, terminate Bluetooth communications. Then, push this Bluetooth Module down gently into the slot ( 1 ), and pull it up straight ( 2 ).
13 Continued on next page Installing the Software When you try to perform Bluetooth communications for the first time after inserting this Bluetooth Module in your CLI É handheld, you need to install the Bluetooth Preferences utility in your CLI É handheld.
14 4 Click [Done] when the installer-closing screen appears. Your computer is ready to install the Bluetooth Preferences utility to your CLI É handheld.
15 Performing a HotSync Operation After inserting this Bluetooth Module in your CLI É handheld, you can perform a wireless HotSync operation between your CLI É handheld and a Bluetooth compatible Windows computer.
16 1 Setting the communication method/Performing bonding For Bluetooth communications, set the communication method and bond a communication device to your CLI É handheld. Turn on the power of your computer and activate Bluetooth communications. For details, see the manual and online manual of your computer.
17 4 Tap [New]. The [Edit Connection] screen appears. • Name : You can specify a name of connection method freely according to the Bluetooth compatible communication device you use. Enter any connection name you like in [Custom]. • Connect to : Select [PC].
18 6 Select a personal computer you want to bond to your CLIÉ handheld, and tap [OK]. The [Add Trusted Device] screen appears. 7 Tap [Yes]. The [Bluetooth Security] screen appears on your CLI É handheld. The [Passkey Input] dialog box appears on the display of the selected computer.
19 Tips • The step in which the [Passkey Input] screen appears varies depending on Bluetooth compatible devices, and for some devices, the [Passkey input] screen does not appear. In any case, follow the instructions shown on the screen and enter a Passkey when required.
20 4 Tap V below the icon, and select the connection you would like to use. For connection, select the connection name that you specified in the Step 4 of “ 1 Setting the communication method/Performing bonding ” on page 17. 5 Tap the icon. A HotSync operation starts.
21 Performing a HotSync Operation for the Second Time and Thereafter Once you have bonded your Bluetooth compatible computer to your CLI É handheld, following the instructions described in “ Perfor.
22 Accessing the Internet You can enjoy browsing various homepages or sending/receiving email using your CLI É handheld, via a Bluetooth compatible cellular phone, modem, or LAN access point.
23 1 Setting the connection method/Performing bonding You need to set the communication method and perform bonding for Bluetooth communications. 1 Turn on the power of a cellular phone, modem, or LAN access point, and activate Bluetooth communications.
24 5 Tap [New]. The [Edit Connection] screen appears. • Name : You can specify a name of connection method freely according to the Bluetooth compatible communication device you use. Enter any connection name you like in [Custom]. • Connect to : Select according to the device you use.
25 7 Select the cellular phone, modem or LAN access point you want to bond to your CLIÉ handheld, and tap [OK]. The [Add Trusted Device] screen appears. 8 Tap [Yes]. If you have selected a cellular phone, the [Passkey Input] screen appears on the display of the cellular phone.
26 Tips • The step in which the [Passkey Input] screen appears varies depending on Bluetooth compatible devices, and for some devices, the [Passkey input] screen does not appear. In any case, follow the instructions shown on the screen and enter a Passkey when required.
27 2 Tap V of [Service], and select the name of the Internet Service Provider you use. 3 Tap V of [Connection] that is located in the middle of the screen, and select the connection you use. Select the connection name you specified in Step 5 in the procedure of “ 1 Setting the connecting method/Performing bonding ” on page 24.
28 3 Browsing homepages/ Sending/receiving email You can do the following operations from the home screen of your CLI É handheld. Browsing homepages Start up necessary application such as “ AvantGo, ” etc., and specify a homepage address (URL) to see a homepage.
29 Accessing the Internet for the Second Time and Thereafter Once you have bonded a communication device to your CLI É handheld, following the instructions in “ Accessing the Internet by Bluetooth Communications for the First Time ” on pages 22-28, you can access the Internet easily from the second time.
30 4 Browse a homepage or send/receive email. If you cannot access the Internet following the instructions in “Accessing the Internet for the Second Time and Thereafter” Tap V in the upper right corner of the [Preferences] screen on your CLI É handheld, and select [Network].
31 Exchanging Information between Two CLIÉ Handhelds You can transfer the data you have stored in Date Book, Address Book, To Do List, and Memo Pad to another Bluetooth compatible CLI É handheld. 1 Select the data you want to transfer from Date Book, Address Book, To Do List, and Memo Pad.
32 3 Tap [Send] on the menu list. To transfer Date Book data: Tap [Send Event]. To transfer Address Book data: Tap [Send Address]. To transfer To Do List data: Tap [Send Item]. To transfer Memo Pad data: Tap [Send Memo]. A Bluetooth compatible device discovery begins in the vicinity of your CLI É handheld.
33 Playing Reversi The supplied application “ Reversi ” allows you to play the game against your opponent using two Bluetooth compatible CLI É handhelds. Installing Reversi Follow the instructions on page 13, and tick the check box of [Reversi] in Step 3.
34 Looking at Information Looking at Information on Bluetooth Communications You can see Bluetooth related information on your CLI É handheld. 1 Tap the [Preferences] icon on the home screen of your CLIÉ handheld. The [Preferences] screen appears. 2 Tap V in the upper right corner of the screen, and select [Bluetooth].
35 • Allow Device to be Discovered : If you set this item to [Yes], the CLI É handheld becomes detectable as a Bluetooth compatible device when another Bluetooth compatible device is performing a device discovery. If you set this item to [No], the CLI É handheld will not respond to a device discovery.
36 3 Tap [Trusted Devices]. The Bluetooth Module is initialized, and the Bluetooth compatible devices that are bonded to it are displayed. 4 Select a device the information of which you want to know. 5 Tap [Details]. The [Device Details] screen appears.
37 Deleting Unnecessary Bonding Information You can delete bonding information on the devices that are no longer needed. 1 Insert this Bluetooth Module in your CLIÉ handheld. 2 Tap the [Preferences] icon on the home screen of your CLIÉ handheld. The [Preferences] screen appears.
38 7 Tap [Delete The Device]. The [Delete Trusted Device] screen appears on your CLI É handheld. 8 Tap [OK]. The Bluetooth compatible device that you have selected is deleted from the list of bonded devices.
39 Troubleshooting If any problem occurs, for example, if communication is not possible, or if the unit does not operate normally, please check the points listed in this troubleshooting guide. For information on the Bluetooth compatible devices, check our official Sony CLIÉ Web site: Customers in USA, Canada and Mexico: http://www.
40 Symptom A message appears indicating that Bluetooth accessory cannot be found. The message “ The server does not respond ” or “ A modem cannot be found ” appears, and communication is not possible.
41 HotSync operation problems Symptom A HotSync operation cannot be performed. Cause/Remedy • Ensure that the icon is displayed on the task tray on your Windows computer display and that HotSync Manager is running. To make sure it is running, click the icon.
42 Internet Connection problems Symptom Communication is not stable. You cannot access the Internet. Cause/Remedy Radio wave conditions or telephone circuit conditions may not be good. Check the bars showing the reception field intensity on the cellular phone.
43 Symptom You cannot send or receive email. Cause/Remedy Check the following settings of the emailing application on the CLI É handheld. • Is the server type set correctly? • Are the user name a.
44 Precautions on Use Handling this Bluetooth Module • Do not subject this unit to excessive shock, and take care not to drop it to prevent a malfunction. • Do not use or store this unit in locations subject to: - extremely high temperature, such as in direct sunlight or near a heater.
45 Communication (If You Use a Cellular Phone) • If you have performed an unnecessary line feed or entered alphanumeric string of three lines or more in the user name of the [Network] settings on th.
46 Specifications Wireless Communication Communication method Bluetooth standard Ver. 1.1 Output Bluetooth standard Power Class 2 Communication range 1) Line of sight approx. 10 m Supported Bluetooth profiles 2) Serial Port Profile Dial-up Networking Profile LAN Access Profile Object Push Profile Frequency band 2.
47 1) Actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, interference, radio wave conditions, reception sensitivity or antenna ’ s performance, and operating system or software application, etc.
Printed in Japan Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Customer Support For the latest support information, check our official Sony CLI É Web site Customers in USA, Canada and Mexico: http://www.
An important point after buying a device Sony PEGA-MSB1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony PEGA-MSB1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony PEGA-MSB1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony PEGA-MSB1 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony PEGA-MSB1 will certainly help you make a decision on the purchase.
If you already are a holder of Sony PEGA-MSB1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony PEGA-MSB1.
However, one of the most important roles played by the user manual is to help in solving problems with Sony PEGA-MSB1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony PEGA-MSB1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
