Instruction/ maintenance manual of the product PEGA-KB20 Sony
Go to page of 2
Operating Instructions Mode d’emploi PEGA-KB20 Sony Corporation © 2002 Printed in Japan English W ARNING To prevent fir e or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only .
Specifications Input DC 3 V Power consumption 7.5 mW (when in normal operation) Operating temperature 41 ˚ F to 95 ˚ F (5 ˚ C to 35 ˚ C) Dimensions 3 5 / 8 × 23 / 32 × 1 11 / 16 inches (89 × 17.5 × 42.5 mm) (w/h/d) (Excluding the largest pr ojecting part) Mass.
An important point after buying a device Sony PEGA-KB20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony PEGA-KB20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony PEGA-KB20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony PEGA-KB20 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony PEGA-KB20 will certainly help you make a decision on the purchase.
If you already are a holder of Sony PEGA-KB20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony PEGA-KB20.
However, one of the most important roles played by the user manual is to help in solving problems with Sony PEGA-KB20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony PEGA-KB20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center