Instruction/ maintenance manual of the product 24-7224 Bacharach
Go to page of 10
Introduction The Bacharach Flue-Gas Sample Conditioning System consists of the following components: • Probe with Peltier Cooler • Condensate Pump with Water Trap • Power Supply The function of this system is to remove water vapor from the ue-gas sample, thus preventing the formation of water droplets inside the probe hose.
Flue Gas Sample Conditioning System 2 Bacharach, Inc. Instruction 24-9415 T echnical Data Probe: Standard Length ......................................................... 11.5 in (295 mm) Optional Lengths ..............................................
Instruction 24-9415 Bacharach, Inc. 3 Flue Gas Sample Conditioning System Figure 2. Equipment Setup PEL TIER COOLER PROBE ASSEMBL Y PUMP POWER SUPPL Y 100 – 240 V AC 50/60 HZ Connect to Combustion T est Equipment ST ACK TEMP .
Flue Gas Sample Conditioning System 4 Bacharach, Inc. Instruction 24-9415 Operation When ready to conduct a combustion efciency test, plug in the power supply of the Flue-Gas Sample Conditioning System. You should hear the condensate pump start running and see the Peltier cooler’s red LED turn on and off as the cooler is cycled.
Instruction 24-9415 Bacharach, Inc. 5 Flue Gas Sample Conditioning System Maintenance Probe The probe’s sponge-type lter (Figure 3, Item 9) needs to be inspected at regular intervals for dirt contamination. Replace lter as necessary by rst pulling out the Peltier cooler from the probe and then exchanging the lter with a new one.
Flue Gas Sample Conditioning System 6 Bacharach, Inc. Instruction 24-9415 Replacement Parts Item Description Part No. (Fig 3) Probe: 1 Complete Assembly (w/ 11.5 in. probe tube)................. 24-3038 2 Probe Tubes: 7 in. (180 mm) ..................
Instruction 24-9415 Bacharach, Inc. 7 Flue Gas Sample Conditioning System Figure 3. Replacement Parts 1 1 20 20 12 Part of Item 10 1 21 9 6 7 8 5 2 Part of Item 10 13 14 18 23 17 22 16 20 19 15.
Flue Gas Sample Conditioning System 8 Bacharach, Inc. Instruction 24-9415 Bacharach Sales/Service Centers Service can be obtained by contacting a Bacharach Service Center at the following locations: U.
Instruction 24-9415 Bacharach, Inc. 9 Flue Gas Sample Conditioning System.
Headquarters: 621 Hunt V alley Circle, New Kensington, P A 15068 Ph: 724-334-5000 • Fax: 724-334-5001 • T oll Free: 800-736-4666 Website: www .bacharach-inc.com • E-mail: help@bacharach-inc.com Printed in U.S.A. ® Registered T rademark Copyright © Bacharach, Inc.
An important point after buying a device Bacharach 24-7224 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bacharach 24-7224 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bacharach 24-7224 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bacharach 24-7224 you will learn all the available features of the product, as well as information on its operation. The information that you get Bacharach 24-7224 will certainly help you make a decision on the purchase.
If you already are a holder of Bacharach 24-7224, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bacharach 24-7224.
However, one of the most important roles played by the user manual is to help in solving problems with Bacharach 24-7224. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bacharach 24-7224 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
