Instruction/ maintenance manual of the product KV-F25MN11 Sony
Go to page of 21
T rinitr on Color T V 1995 by Sony Corporation 3-810-564- 11 (1) Operating Instructions MN11 KV -F25 KV -F29.
2.
3 TV SYSTEM B/G I D/K M TV SYSTEM AUTO PROGR MANUAL PROGR COLOR SYSTEM L VIDEO S1 VIDEO 2 ( MONO ) VIDEO IN 3 – R AUDIO – AUTO PROGR – MENU + ENTER (CLEAR).
4.
Getting Started 5 T able of contents Getting Started 6 Connections 7 Presetting channels 9 Introducing the menu 10 Changing the menu language Operations 11 Watching the TV 12 Adjusting the picture 14 .
Getting Started 6 Getting Started Connections Connecting a VHF antenna or a combination VHF/UHF antenna — 75-ohm coaxial cable (round) Attach an optional IEC antenna connector to the 75-ohm coaxial cable. Plug the connector into the (antenna) socket at the rear of the TV.
Getting Started 7 Pr esetting channels You can preset TV channels easily by storing all the receivable channels automatically. You can also preset channels manually or disable program positions. Presetting channels automatically You can preset up to 100 TV channels in numerical sequence from program position 1.
Getting Started 8 Disabling program positions By disabling unused or unwanted program positions, you can skip those positions when you press PROGR +/ – . 1 Press PROGR +/ – until the unused or unwanted program position appears on the screen. 2 Press MANUAL PROGR.
9 Getting Started Intr oducing the menu You can use the on-screen menus to set the picture quality, sound, and other settings. You can use buttons on both the remote commander and the TV to operate the menus.
10 Getting Started Changing the menu language If you prefer Chinese to English, you can change the menu language. You can use buttons on both the remote commander and the TV. Getting back to the English menu 1 Press MENU. + or – MENU 1 Press MENU. 2 Press + or – to move the cursor ( z ) to LANGUAGE.
11 Getting Started 123 46 789 ÷ 0 5 Operations W atching the TV Switching off the TV To switch off the TV temporarily, press POWER on the remote commander. 1 Press POWER to turn the TV on. To scan through channels Press PROGR/PAGE +/ – until the channel you want appears.
12 Operations Adjusting the pictur e Muting the sound Press MUTING. MUTING Displaying on-screen information Press DISPLAY/REVEAL. The program position, local system, and TV settings are displayed on the screen. MUTING REVEAL DISPLAY 1 Press MENU. MENU 2 Press + or – to move the cursor ( z ) to VIDEO CONTROL.
Operations 13 Adjusting the picture setting (ADJUSTMENT) You can adjust the picture to your own taste with the ADJUSTMENT option. The adjusted settings are stored in the PERSONAL option. 1 Press MENU. 2 Press + or – to move the cursor ( z ) to VIDEO CONTROL, and press ENTER.
14 Operations Adjusting the sound Adjusting the sound setting (ADJUSTMENT) You can adjust the sound to your own taste with the ADJUSTMENT option. The adjusted settings are stored in the PERSONAL option. 1 Press MENU. 2 Press + or – to move the cursor ( z ) to AUDIO CONTROL, and press ENTER.
Operations 15 Selecting a ster eo or bilingual pr ogram You can enjoy stereo sound or bilingual program of NICAM and A2 (German) systems. The initial setting is stereo sound.
16 Operations V iewing T eletext TV stations broadcast an information service called Teletext via a TV channel. Teletext service allows you to receive various information such as weather forecasts or news at any time you want. Displaying Teletext 1 Select a TV channel which carries the Teletext broadcast you want to watch.
Operations 17 Revealing concealed information Sometimes pages contain concealed information, such as an answer to a quiz. The reveal option lets you disclose the information. Press DISPLAY/REVEAL. To conceal the information, press DISPLAY/REVEAL again.
18 Operations Using the AV OUT (advanced rec-out) terminal You can select the output signal from the MON/TV OUT jacks at the rear of the TV. 1 Press MENU. 2 Press + or – to select SET UP, and press ENTER. 3 Press + or – to select AV OUT, and press ENTER.
Operations 19 Adjusting the tilt of the picture p KV-F29MN11/F29MH11 only You can adjust the tilt of the picture if it is not aligned to the TV screen. This may happen due to the direction of the earth ’ s magnetic field in relation to the position of the TV.
20 Operations Additional Information T r oubleshooting If you have any problems, read this manual again and check the countermeasure for each of the symptoms listed below. If the problem persists, contact your nearest authorized service center or dealer.
Sony Corporation Printed in Indonesia Specifications 110-240 V AC, 50/60 Hz 163 169 B/G, I, D/K, M PAL, PAL 60, SECAM, NTSC4.43, NTSC3.58 NICAM Stereo B/G, I ; A2 Stereo (German) B/G VHF : E2 to E12 /.
An important point after buying a device Sony KV-F25MN11 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony KV-F25MN11 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony KV-F25MN11 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony KV-F25MN11 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony KV-F25MN11 will certainly help you make a decision on the purchase.
If you already are a holder of Sony KV-F25MN11, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony KV-F25MN11.
However, one of the most important roles played by the user manual is to help in solving problems with Sony KV-F25MN11. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony KV-F25MN11 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
