Instruction/ maintenance manual of the product 7311 Baby Trend
Go to page of 19
01.06 Instruction Manual Convenience through innovation and thoughtful design Sit N Stand LX T andem Stroller with Car Seat Snap N Go Attachment System Model #731 1 Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.
W ARNING: Please follow all of these instructions to ensur e the safety of your child. Keep these instructions for futur e r efer ence. W ARNING: Failur e to follow these instructions could r esult in serious injury or death. A void serious injury from falling or sliding out.
TO ENSURE SAFE OPERA TION OF YOUR STROLLER, PLEASE FOLLOW THESE INSTRUCTIONS CAREFULL Y . RET AIN THESE INSTRUCTIONS FOR FUTURE REFERENCE ASSEMBL Y 1. Remove stroller from box. The front wheels, rear wheels, child tray , and canopy need to be installed prior to use.
6. T o attach the front child tray , push the tray onto the front frame tube, lining up the tray between the protruding rivet and the seat. Push backward on the latch until snapped into place. The protruding rivet on the outside of the frame tube should be above the tray latch.
1. Have child sit on the jump seat facing backwards. Secure the seat belt, which is attached to the back of the seat, around the childʼ s waist, and buckle to the crotch strap. See fi gure 1 1. 2. Adjust the seat belt to be snug around the childʼ s waist.
BRAKES W ARNING: Always set brakes when the str oller is not being pushed so that the str oller will not r oll away . Never leave stroller unattended on a hill or incline as the str oller may slide down the hill. 1. T o engage brakes, apply light downward pressure to the brake lever located on each rear wheel.
T O UNFOLD STROLLER T O UNFOLD STROLLER Do Not allow children near stroller while unfolding. 1. Release the folding latch, which is located on the right side. See fi gure 18. 2. Lift up on the stroller handle with both hands until the stroller frame is erect and locked in the open position.
01.06 Instruction Manual Convenience through innovation and thoughtful design 8 Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.
Figure 1. 9 Car Seat Chart Snap N Go Attachment The Snap N Go attachment system is easily confi gured to carry most infant car seats in the market. New infant car seats are introduced by various manufacturers from time to time and may not be listed below .
Step 1: Remove the child tray . Insert the Snap N Go bar into the two plastic fi ttings located on the lower frame tube of the stroller . Please see fi gure 1. The bar will lock into place with the metal snap button popping into the hole in the plastic fi tting.
Cosco Designer 22 ® and Designer 35 ® Please follow the following instructions for proper installation of your infant car seat. Installation of the Cosco ® Designer 22 ® and Designer 35 ® Infant Car Seat 1. Place front seat in the reclined position.
Peg Per ego ® Primo V iaggio ® Please follow the following instructions for proper installation of your infant car seat. Installation of Peg Per ego ® Primo V iaggio ® Infant Car Seat 1.
Evenfl o ® Cozy Carry ® Please follow the following instructions for proper installation of your infant car seat. Installation of the Evenfl o ® Cozy Carry ® Infant Car Seat 1.
Evenfl o ® On My W ay ® Please follow the following instructions for proper installation of your infant car seat. Installation of the Evenfl o ® On My W ay ® Infant Car Seat 1.
15 Evenfl o ® Embrace ® Please follow the following instructions for proper installation of your infant car seat. Installation of the Evenfl o ® Embrace ® Infant Car Seat 1.
16 Century ® V ante ® Please follow the following instructions for proper installation of your infant car seat. Installation of the Century ® V ante ® Infant Car Seat 1.
17 Graco Snug Ride ® Please follow the following instructions for proper installation of your infant car seat. Installation of the Graco ® Snug Ride ® Infant Car Seat 1.
Cosco Arriva Please follow the following instructions for proper installation of your infant car seat. Installation of the Cosco ® Arriva ® Infant Car Seat 1.
Baby T r end Latch-Loc, Flex-Loc Forward BT BAR Figure 2. Figure 1. Position “4” Please follow the following instructions for proper installation of your infant car seat. Installation of the Baby T rend ® Latch-Loc ® Infant Car Seat 1. Remove (unscrew) the Snap Bar from the Snap N Go attachment.
An important point after buying a device Baby Trend 7311 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baby Trend 7311 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baby Trend 7311 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baby Trend 7311 you will learn all the available features of the product, as well as information on its operation. The information that you get Baby Trend 7311 will certainly help you make a decision on the purchase.
If you already are a holder of Baby Trend 7311, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baby Trend 7311.
However, one of the most important roles played by the user manual is to help in solving problems with Baby Trend 7311. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baby Trend 7311 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
