Instruction/ maintenance manual of the product AT-100 B-52
Go to page of 8
B-52 PROFESSIONAL 3383 Gage A venue, Huntington Park, CA, 90255 Phone: 323-277-4100 Fax: 323-277-4108 National: 1-800-344-4384 Internet: www .B-52GUIT AR.com E-mail: info@B-52PRO.com E.T .I. Sound Systems is dedicated to product excellence and ther efor e continuously attempts to improve each and every model we manufactur e.
.
2 INSIDE THIS INSTRUCTION MANUAL Important Safety Instructions / Features ............................................................... 2 Important Information ........................................3 A T -100 Controls .............................
3 HEARING DAMAGE, PROLONGED EXPOSURE TO EXCESSIVE SPL B-52 Stealth Series amplifiers and speakers, including the A T -100, are capable of producing sound pressure levels (SPL) sufficient to cause permanent hearing damage to performers, production crews or people in the audience.
1. POWER ON/OFF SWITCH: T urns the A T -100 on and off. 2. ST ANDBY ON/OFF SWITCH: Allows the A T -100 to remain turned ON for limited periods of inactivity without the risk of damaging / over-heating the amplifier tubes. When the Standby switch is in the ST ANDBY position the A T -100 is in a non- operational setting.
5 operate into any 4 ohm, 8 ohm or 16 ohm cabinets(s). NOTE: Always set the switch to match the impedance of your cabinet(s). 35. LOUDSPEAKER OUTPUTS: Connects the A T -100 to the speaker cabinets such as the A T -412A or A T -412B. NOTE : Always be sure the speakers are plugged in before attempting to operate the amplifier .
W ARRANTY INFORMA TION Thank you for choosing a B-52 sound product. B-52 manufactures some of the world’s best sounding and most reliable professional speaker systems, amplifiers and components. E.T .I. Sound Systems, Inc., makers of B-52, takes great pride in thoroughly testing each B-52 product prior to shipment.
EXPERIENCE THE POWER! www .B-52GUIT AR.com.
An important point after buying a device B-52 AT-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought B-52 AT-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data B-52 AT-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, B-52 AT-100 you will learn all the available features of the product, as well as information on its operation. The information that you get B-52 AT-100 will certainly help you make a decision on the purchase.
If you already are a holder of B-52 AT-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime B-52 AT-100.
However, one of the most important roles played by the user manual is to help in solving problems with B-52 AT-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device B-52 AT-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
