Instruction/ maintenance manual of the product CDP-C40 Sony
Go to page of 16
SON'Yo Compact Disc Player CDP-C40 CDP-C50 3-769-921-23 (2) DIGITAL AUOtO Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. CDP-C50 Difference between the CDP-C40 and the CDP-C50 This manual covers the CDP-C40 and the CDP-C50.
On safety • Operate the unit only on 120 V AC, 60 Hz. • Should any liquid or solid object fail into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. • Unplug the unit from the wall outlet if it will not be used for a long time.
• Turn off the amplifier before making connections. • Be sure to insert the plugs firmly into the jacks. Loose connections may cause hum and noise.
Control Identification Refer to the pages indicated in • for details. DISC SELECT buttons _) TIME button ® Display window POWER switch _) TIMER switch ® (CDP-C50 only) Disc compartment , .
Control Identification TIME button _) SHUFFLE PLAY button (D DISC SELECT buttons (_) (_) TRACK selectors (numeric buttons) (D (_)-- I_ (play) button ( II (pause) button _) • (stop) button ( r button.
Stopping play To pause during play To stop play To stop play and open the compartment Press • II (or II on the remote commander). To restart play, press • II (11) again. Press II. Press _. To close the compartment, press _A or the compartment itself.
To display the total number of selections If you press __ or the compartment itself to close the compartment, the total number of selections and the total playing time are displayed for a few seconds. -- 7 e 9 tO II 12 _3 t4 t_ 16 When a disc containing more than 16 selections is inserted, _ (meaning: "over 16 selections") appears.
By using the DISC SELECT buttons or the DISC SKIP button during play, you can locate the beginning ofany disc. To select a particular disc Press the corresponding DISC SELECT button.
To return to normal play mode Press PGM again. 1 Press PGM. 2 Press the DISC SELECT button which corresponds to the disc you want. corresponds to the selection you want, ® _34s :, 'r,,i,,d To program additional selections on a same disc, repeat step 3.
You can play up to 32 selections in the desired order. 1 Pre. PQ.. 2 Press D. SELEOT (disc skip) to move the disc tray. :3 Choose the selection by pressing t,4<1 or li,_. (To choose a whole disc, press Ibll_, and then 1,44.) 4 Press PGM again. 5 To program additional selections on a same disc, repeat steps 3 and 4.
For the CDP-C50: Press CHECK on the remote commander. Each time you press CHECK, a selection will be displayed for a few seconds, in the order they have been programmed. For the CDP-C40: 1 Press II. 2 Press IH_. Each time you press I_1_, a selection will be displayed for a few seconds, in the order they have been programmed.
i r_ [33 _r_q. ,___ E;3 r_ E_3 r-n C3 r_ E3 r_ r-q Fq_ C3 1 Press SHUFFLE PLAY. Shuffle play will begin. When two or more discs are in the compartment: All the discs and selections will be played in random order. After one selection is played, me next selection will be from another disc.
You can repeat a single selection, a stngle disc or all the discs. E2_ E=] r_ 1223 Q _ [2=]r"_ [2=] _ r_ IZ3 C3_ r--_ m REPEAT What to be repeated Operation (during play or pause) A selection being Press REPEAT once. played A disc being played Press REPEAT twice.
1 Select the disc to be played first with DISC SELECT. begin automatically at the preset time. When the timer play has ended You cannot select the program or shuffle function Be sure to set the TIMER switch to OFF. With timer operation, only normal play is possible.
Cleaning the cabinet Clean the cabinet, panel and controls with a soft cloth lightly moistened with mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. Cleaning discs Before playing, clean the disc with the cleaning cloth.
The following checks will assist in the correction of most problems which you may encounter with your unit. Should any problem persist after you have made these checks, consult your nearest Sony service facility. Before going through the check list below, first refer back to the connection and operating procedures.
An important point after buying a device Sony CDP-C40 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony CDP-C40 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony CDP-C40 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony CDP-C40 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony CDP-C40 will certainly help you make a decision on the purchase.
If you already are a holder of Sony CDP-C40, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony CDP-C40.
However, one of the most important roles played by the user manual is to help in solving problems with Sony CDP-C40. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony CDP-C40 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
