Instruction/ maintenance manual of the product 1000BT Azden
Go to page of 8
User’s Guide 1000URX • 1000URXAB • 1000URXVM • 1000URXSi 1000BT • 1000XT ENHANCED BROADCAST PERFORMANCE UHF WIRELESS SYSTEM Azden Corporation, 147 New Hyde Park Road, P .O. Box 10, Franklin Square, NY 1 1010 vox - 516.328.7500 • fax - 516.
D. Input Level Adjustment This screwdriver adjustment [ i ] controls the input level of the micro- phone. Counterclockwise rotation reduces the input gain while clock- wise rotation increases the input gain. E. Display In addition to showing the frequency and channel number , the display [ l ] also shows other useful information.
USING THE 1000XT TRANSMITTER’S CONTROLS AND DISPLAY A. Power The POWER ON/OFF switch [ k ] turns the 1000XT ON or OFF . B. Audio Prior to first turning the 1000XT ON it is best to set the AUDIO switch [ j ] to OFF . When you are ready to begin transmitting, switch to ON.
TABLE OF CONTENTS 1000URX RECEIVER VIEW .............................................................................................. i I NTRODUCTION ....................................................................................................
G. Display (continued) life (from 1 to 3 segments) with 3 segments meaning maximum battery power . The bottom segment will blink when the battery power falls to less than 6.2V and indicates that it is time to replace the battery . Azden recommends the use of Alkaline batteries only .
RECEIVER (1000URX) SETUP (continued) A. Attaching the antennas to the 1000URX: T o attach the high-gain antennas to the 1000URX, fit the BNC connector on the antenna to the receiver [ c ] , press down and rotate clockwise. T o remove the antennas, rotate the antenna’s BNC connector counter- clockwise and pull up.
SETTING THE TRANSMITTING FREQUENCY ON THE 1000BT Before the 1000BT can be used, it and the associated receiver have to set to the same frequency . This can be accomplished on the 1000BT transmitter by first setting the LCD display to one of two views - ‘Fre- quency’ or ‘Channel’.
THE 1000BT TRANSMITTER 1 7 8 9 10 ♣ ♠ THE 1000URXAB and 10000URXVM The 1000URXAB is a specially developed version that integrates the Anton/Bauer “Gold Mount” to power the receiver . The 1000URXVM is a specially developed version that integrates the IDX battery-mount to power the receiver .
An important point after buying a device Azden 1000BT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Azden 1000BT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Azden 1000BT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Azden 1000BT you will learn all the available features of the product, as well as information on its operation. The information that you get Azden 1000BT will certainly help you make a decision on the purchase.
If you already are a holder of Azden 1000BT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Azden 1000BT.
However, one of the most important roles played by the user manual is to help in solving problems with Azden 1000BT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Azden 1000BT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
