Instruction/ maintenance manual of the product K-1x Ayre Acoustics
Go to page of 24
A y r e K-1x Preamplifier Owner’s Manual.
.
Table of Contents Welcome to Ayre . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation and Operation . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optimizing the Phono Stage . . . . . . . . . . . . . . . . . . . . . . . . 9 Numbers and Specifications .
Welcome to Ayre Please send in your warranty registration card so we can stay in contact with you. The Ayre K-1x offers a significant advance in the musical performance of audio preamplifiers. The warmth and immediacy of a live performance are apparent from the first listening.
Installation and Operation The Ayre K-1x is easy to hook up and use. The following guidelines will ensure that the installation goes smoothly. Location The Ayre K-1x comprises two components - the main preamplifier and the external power supply, which are joined by an umbilical cable.
Inputs When you have a choice, a balanced connection will offer slightly higher sound quality than an unbalanced connection. The Ayre K-1x offers three pairs of balanced inputs and three pairs of unbalanced inputs. Balanced connections are made via three-pin XLR connectors, while unbalanced connections are made via RCA jacks.
Remove the old label by using a small object (such as an allen wrench) to push through the access holes on the rear of the faceplate. The labels have a self-adhesive backing, and new ones are simply pressed into place. Outputs All three pairs of outputs may be used simultaneously if desired.
Powering the Unit Be sure to connect the umbilical cable to the power supply before plugging in the AC power. Install or remove the umbilical connector only when the AC power is disconnected. The Ayre K-1x draws very little power and is designed to be left on at all times.
Unlike other products that use conventional volume controls (potentiometers), the Ayre K-1x uses a mil-spec, precision stepped attenuator with solid-silver contacts to provide the ultimate in sound quality. This volume control features 46 distinct positions, offering precise and repeatable settings.
Unbalanced Power Amplifiers When using the Ayre K-1x with an unbalanced power amplifier, note tha t the unity-gain volume setting will now occur when the volume control is five steps below the maximum setting. Unbalanced power amplifiers with single-ended inputs only utilize one-half of the Ayre K-1x’s balanced output signal.
Optimizing the Phono Stage The optional phono stage in the Ayre K-1x offers the ultimate in flexibility and performance for all types of phono cartridges. Connections As the phono cartridge is an inherently balanced device, the phono stage is also balanced, using XLR jacks at the input.
Ayre manufactures both adapters and dedicated cables. These high-performance custom designs are available from your authorized Ayre dealer. In addition, termination instructions are available if you wish to reterminate your current cables. Please contact the factory for further details.
The phono gain and loading can be adjusted by your authorized Ayre dealer. However, for those owners that prefer to perform this task themselves, the following tools are required: 5/64" allen wrench (supplied) Small screwdriver - 0.080" to 0.
Disconnect the preamplifier’s power supply from the AC power before working on the unit. To adjust the gain or loading of the phono stage, use the supplied 5/64" allen wrench to remove the six screws that secure the top cover. The two phono boards (one per channel) are mounted vertically on the right and left sides of the chassis.
Numbers and Specifications Gain - Line 16 dB to balanced outputs, 10 dB to unbalanced outputs Gain - Phono Adjustable — 40 dB, 50 dB (factory setting), 60 dB Input Impedance - Line 10 k Ω (each phase) Input Impedance - Phono Adjustable — 50 k Ω (factory setting) 100 Ω , 249 Ω , 499 Ω , 1000 Ω loading resistors supplied.
In Case of Trouble Should the Ayre K-1x preamplifier ever fail to operate properly, please check the following: Symptom: Remote control not working. Check the condition of the batteries (2 x AAA) located in the remote control. Symptom: No sound, even though status indicator is glowing blue.
The condition of the fuse can be determined by a visual inspection, although an ohm-meter provides a more reliable method. If in doubt, substitute the spare for the operating fuse. If the spare fuse also blows, do not attempt further repairs. Always use the correct fuse! Line Voltage Fuse Rating (Time-Delay) 100 V .
Statement of Warranty Please take the time to fill out and return the enclosed warranty registration card. Your Ayre K-1x preamplifier is warranted against defects in workmanship and materials for a period of five years from the date of purchase. This warranty is transferable to subsequent purchasers within the original five-year period.
3. Ayre reserves the right to inspect any product that is the subject of any warranty claim prior to repairing or replacing it. Final determination of warranty coverage lies solely with Ayre. Out-of-warranty claims will be billed for labor, materials, return freight, and insurance as required.
6. Ayre does not authorize any third party, including any dealer or sales representative to assume any liability of Ayre or make any warranty for Ayre. The unit must not have been altered or improperly serviced. The serial number on the unit must not have been altered or removed.
A Place for Notes Page 19.
Revision 1.3.
.
Ayre Acoustics, Incorporated 2300-B Central Avenue Boulder, Colorado 80301 303 442.7300 www.ayre.com.
An important point after buying a device Ayre Acoustics K-1x (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ayre Acoustics K-1x yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ayre Acoustics K-1x - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ayre Acoustics K-1x you will learn all the available features of the product, as well as information on its operation. The information that you get Ayre Acoustics K-1x will certainly help you make a decision on the purchase.
If you already are a holder of Ayre Acoustics K-1x, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ayre Acoustics K-1x.
However, one of the most important roles played by the user manual is to help in solving problems with Ayre Acoustics K-1x. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ayre Acoustics K-1x along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
