Instruction/ maintenance manual of the product OESWC-7552-STK Axxess
Go to page of 8
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION 1-800-221-0932 axx essinterface.com INST ALLA TION INSTRUCTIONS FOR PART OESWC-7552-STK The OESWC-7552-STK is designed to allow you to add steering wheel control options to 2007 and up Nissan vehicles.
T OOLS REQUIRED FOR INST ALLA TION •Cutting T ool •T ape •Crimping T ool •Connectors (I.E. butt-connectors, bell caps, ECT…) • Female Spade Connectors IGNITION TERMINALS WIRE CUTTER M3.5 M2.6 M3 M5 M4 ISO 6 2.5 1.5 *Impor tant: Please chec k steering shr oud bef or e drilling to mak e sur e y ou hav e enough depth.
ASWCST ALK ASSEMBL Y 1. Remove and drill a 3/8 hole in the steering wheel shroud. 2. Select desired length rod and thread a 3/8 hex nut on to the shorter threaded section. 3. Run the four wires from the ASWCST ALK through the rod of choice and screw it into the ASWCST ALK 4.
Wiring Of ASWCST ALK And Interface 1. Connect the BLACK wires of the ASWCST ALK and the BLACK wire of the interface to ground. Y ou may use the same ground point that is used for the radio. 2. Connect the GREEN/ORANGE and BLACK/GREEN wires of the ASWCST ALK to the corresponding wires on the interface.
8. Make sure the steering wheel control buttons function correctly in the vehicle and enjoy your radio. If the ASWCST ALK is mounted on the right side of the steering column follow the instructions below . (Auto-detect must be done rst) 1. T urn the ignition on 2.
1. V olume up 2. V olume down 3. Seek up 4. Seek down 5. Mode (source) 1. V olume up 2. V olume down 3. Seek up 4. Seek down 5. Mode (source) 4 1 2 3 4 5 1 2 3 4 5.
NO TES.
REV . 2/4/1 1 1-800-221-0932 axx essinterface.com © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION INST ALLA TION INSTRUCTIONS FOR PART OESWC-7552-STK K NO WLEDGE IS P OW ER E nhance your installation and fabrication skills by enrolling in the most re cognized and re spected mobile electronics school in our industry .
An important point after buying a device Axxess OESWC-7552-STK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axxess OESWC-7552-STK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axxess OESWC-7552-STK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axxess OESWC-7552-STK you will learn all the available features of the product, as well as information on its operation. The information that you get Axxess OESWC-7552-STK will certainly help you make a decision on the purchase.
If you already are a holder of Axxess OESWC-7552-STK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axxess OESWC-7552-STK.
However, one of the most important roles played by the user manual is to help in solving problems with Axxess OESWC-7552-STK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axxess OESWC-7552-STK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
