Instruction/ maintenance manual of the product Montreux 16510XX1 Axor
Go to page of 12
Axor Montreux 16510XX1 Axor Montreux 16803XX1 Axor Montreux 16511XX1 Axor Montreux 16805XX1 Installation Instructions / W arranty.
2 Installation Considerations For best results, Hansgrohe recom- mends that this unit be installed by a licensed, professional plumber . Please read over these instructions thoroughly before beginning installa- tion. Make sure that you have all tools and supplies needed to complete the installation.
3 16803XX1 16803XX1 / 16805XX1 16805XX1.
4 Installation 16510 / 16511 only Position the pull rod assembly in the center hole of the mounting surface. Install the friction washer , metal washer and mounting nut. T ighten the mounting nut by hand. T ighten the tensioning screws. All models Position the faucet body on the mounting surface.
5 Install the friction washers, metal washers and mounting nuts. T ighten the mounting nuts by hand. T ighten the tensioning screws. Install the spout, slide bushing and o-ring. Make sure that the slide bushing is oriented correctly . T ighten the spout screw .
6 If it is not satisfactor y , remove the handle screw using a 3 mm Allen wrench. Remove the handle. OR Remove the handle and adapter ..
7 All models: Lightly coat the handle o-rings with the enclosed lubricant. Install the index caps on the hot and cold handles and pull rod assembly . 16510/16511 only Install the pop-up drain. All models: Connect the supply lines to the stops. Use two wrenches, as shown in the diagram, to keep the supply hoses from twisting.
8 Install the pop-up drain (16510 / 16511 only) Attach the swivel connector to the end of the horizontal rod. Attach the swivel connector to the end of the pull rod. Position as desired and tighten with a small, flat bladed screwdriver . Remove the plunger assembly .
9 Replacement Parts 1 cross handle 16597XX0 2 screw cover (set) 97987000 3 sleeve 97993XX0 4 aerator 95378XX0 5 spout, lavator y 97990XX0 6 hot cartridge – cross handle 94009000 hot cartridge – le.
10 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
11 THIS W ARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT P A Y FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com US - Installation Instructions • Part No.
An important point after buying a device Axor Montreux 16510XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axor Montreux 16510XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axor Montreux 16510XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axor Montreux 16510XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Axor Montreux 16510XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Axor Montreux 16510XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axor Montreux 16510XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Axor Montreux 16510XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axor Montreux 16510XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
