Instruction/ maintenance manual of the product Bandpass Subwoofer BPS-1 Sonance
Go to page of 8
Page 1 of 8 Architectural Series ™ Introduction Congratulations on your purchase of the Sonance ® Architectural Series™ BPS-1 Bandpass Subwoofer System. The BPS-1 system will add deep, powerful bass impact to any audio system that includes Sonance Architectural Series speakers.
Page 2 of 8 Installing the BPS-1 Cabinet In New Constr uction 1. Determine the location for the Architectural Series Panel Bracket/Grille and install it according to its instruction manual.
Page 3 of 8 NO TE: D O NO T USE NAILS TO A TT ACH THE T EMPORARY B RACKETS — THEY WILL BE REMOVED AFTER THE BPS -1 CABINET IS A TT ACHED T O THE JOIST . 5. Remove the Drilling T emplate from the joist. 6. Place the BPS-1 cabinet on the temporar y brackets, aligning its mounting holes with the holes drilled through the joist.
Architectural Series ™ BPS-1 I N -C EILING S UBWOOFER I NST ALLA TION M ANUAL Connecting the V ent T ube and Adaptor Baffle 1. Use a Phillips screwdriver to remove t he four screws that attach the paint shield to the Architectural Series Panel Bracket (see Figure 7) .
Architectural Series ™ BPS-1 I N -C EILING S UBWOOFER I NST ALLA TION M ANUAL 5. Make sure the V ent T ube Clamp is positioned around the neck of the Adaptor Baffle and tighten the clamp to secure the V ent T ube around the neck of the Adaptor Baffle.
Page 6 of 8 Architectural Series ™ BPS-1 I N -C EILING S UBWOOFER I NST ALLA TION M ANUAL 3. Strip ¼” – ½” of insulation from each lead of the speaker wire. T wist the strands or tin the exposed wire with solder to ensure that there are no stray strands.
Page 7 of 8 Architectural Series ™ BPS-1 I N -C EILING S UBWOOFER I NST ALLA TION M ANUAL Installing the W oofer Cabinet: Retrofit The BPS-1 can be retrofit installed into a ceiling that has an attic or adequate crawlspace above it.
SONANCE • 212 Avenida Fabricante • San Clemente, CA 92672-7531 • USA 800 . 582 . 7777 or 949 . 492 . 7777 • F AX: 949 . 361.5151 • T echnical Suppor t: 800 . 582 . 0772 www .sonance.com ©2008 Sonance. All rights reser ved. Sonance and Architectural Series are trademarks or registered trademarks of Dana Innovations.
An important point after buying a device Sonance Bandpass Subwoofer BPS-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sonance Bandpass Subwoofer BPS-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sonance Bandpass Subwoofer BPS-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sonance Bandpass Subwoofer BPS-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Sonance Bandpass Subwoofer BPS-1 will certainly help you make a decision on the purchase.
If you already are a holder of Sonance Bandpass Subwoofer BPS-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sonance Bandpass Subwoofer BPS-1.
However, one of the most important roles played by the user manual is to help in solving problems with Sonance Bandpass Subwoofer BPS-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sonance Bandpass Subwoofer BPS-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
