Instruction/ maintenance manual of the product AS2S Sonance
Go to page of 4
INTRODUCTION Thank you for pur chasing the AS2 — AS2/S A ut omatic Speaker Sour ce Selector . The AS2 and AS2/S automatically switch a single pair of speakers between two speaker -level stereo sour ces: a main sour ce connected to the Inpu t A terminals and a remot e source c onnected to the Input B t erminals.
CONNECTING THE AS2 (see Illustration 4 ) IMPORTANT: Make sure all source components and power amplifiers are turned OFF before making any connections. Do not plug the AS2 power supply into a wall outlet until all connections have been made.
Using the AS2 Control Output with Multiple Slave Units The AS2’ s Control Output can supply up to 200mA of cur rent. This allows it to be daisy-chained with up to two (2) AS2/S slave units (or up to fiv e (5) AL2/S slav e units).
Sonance • 212 A venida Fabricante • San Clement e, CA 92672-7531, USA (800) 582-7777 or (949) 492-7777 • F AX: (949) 361-5151 T echnical Support: (800) 582-0772 ©2007 Dana Innovations. All rights reserved. Sonance, Sonamp and iPort are trademarks of Dana Innovations.
An important point after buying a device Sonance AS2S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sonance AS2S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sonance AS2S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sonance AS2S you will learn all the available features of the product, as well as information on its operation. The information that you get Sonance AS2S will certainly help you make a decision on the purchase.
If you already are a holder of Sonance AS2S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sonance AS2S.
However, one of the most important roles played by the user manual is to help in solving problems with Sonance AS2S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sonance AS2S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
