Instruction/ maintenance manual of the product Mow Joe MJ408C Snow Joe
Go to page of 12
© 2011 by Snow Joe, LLC All rights reserved. Original instructions. 1 SA VE THESE INSTRUCTIONS OPERA TOR’S MANUAL IMPOR T ANT! Safety Instructions m W ARNING: READ ALL INSTRUCTIONS BEFORE USE.
2 c) If electrolyte contacts the eyes, ush thor oughly and immediately with water . Seek medical attention. Battery & Char ger m CAUTION: USE ONL Y APPROVED REPLACEMENT BA TTERIES, OTHER BA TTERIES MA Y CAUSE INJUR Y OR DAMAGE TO THE MOWER. The battery that is supplied with this mower is a maintenance- free, sealed, 24V storage battery .
SLOPE OPERA TION Slopes are a major cause of slip and fall accidents, which may result in sever e injury . Operation on all slopes requir es extra caution. If you feel uneasy on a slope, do not mow it. 1. Mow acr oss the face of the slope; never up and down.
4 Know Y our Lawn Mower T echnical Data 1. Battery V oltage – 24V D.C. 2. Char ging Time – 12 hour 3. No load Speed – 3,500/min 4. Cutting Width – 20" (508 mm) 5. Cutting Height – 1.75" - 3.75" (45 mm – 95 mm) 6. Grass Catcher Capacity – 15.
Assembly Parts List • Mulch plug • Grass catcher bag • Dischar ge chute • 24V Battery • Battery Char ger • Manual Note: • Carefully r emove the parts from the box. • Inspect the parts carefully in or der to verify that no breakage or damage occurred during shipping.
Installation or Removal of the Mulch Plug (Fig. 5) 1. UNPLUG THE POWER CORD, AND W AIT FOR BLADE TO COME TO A COMPLETE STOP . 2. T o remove the mulch plug lift the chute cover and pull out on the handle. 3. The mulch plug is inserted on an angle so it will requir e some force when r emoving.
Adjust the Cutting Height (Fig. 8) 1. Simply depress the lever towar ds the wheel and move to desired position. This sets all wheels to the same position. 2. T o raise the height, pull the height adjustment lever from the curr ent stop position towards the back of the mower .
m W ARNING: If the battery pack charged on the appliance, the cable connect appliance and battery pack has to be remove, if not, the char ger output plug can not connect the battery pack char ging terminal. Battery Use NOTE: If the switch does not re-engage or the mower does not run when the battery is installed.
nut (1) “COUNTERCLOCKWISE” to loosen it and “CLOCKWISE” to tighten it. 4. Remove the blade nut (1), the squar e washer (2), and the blade (3). 5. T o re-install the blade, position the blade with the cutting edges toward the gr ound and align the blade on the alignment tabs (one r ound and one semi-round).
Envir onmentally Safe Battery Disposal The following toxic and corrosive materials ar e in the batteries used in this battery pack: a toxic material. m W ARNING: All toxic materials must be disposed of in a specied manner to prevent contamination of the envir onment.
NOTES 11.
12 A T wo-Y ear Full W arranty for r esidential use in the United States and Canada General Conditions: Snow Joe, LLC warrants this product to the original pur chaser for two years against defects in material or workmanship when used for normal residential purposes.
An important point after buying a device Snow Joe Mow Joe MJ408C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snow Joe Mow Joe MJ408C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snow Joe Mow Joe MJ408C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snow Joe Mow Joe MJ408C you will learn all the available features of the product, as well as information on its operation. The information that you get Snow Joe Mow Joe MJ408C will certainly help you make a decision on the purchase.
If you already are a holder of Snow Joe Mow Joe MJ408C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snow Joe Mow Joe MJ408C.
However, one of the most important roles played by the user manual is to help in solving problems with Snow Joe Mow Joe MJ408C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snow Joe Mow Joe MJ408C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
