Instruction/ maintenance manual of the product WP216512BV, P216012, P216512BV Snapper
Go to page of 28
Safety Instructions & Operator’s Manual for 21” STEEL DECK WALK MOWERS SERIES 12 MODELS P216012 P216512BV WP216512BV MODEL NUM BER EXPLA NA T ION WP 21 65 12 BV SELF-PR OPELLED ENGINE T YPE CU.
2 IMPORTA NT SA FETY INSTRUCTIONS WARNING: This powerf ul cuttin g machine is capable of amp utating hand s and feet and can t hrow ob jects that can cause in jury and damage! Failure to comply wi th the follo wing SAFETY inst ructions coul d result in serious injury or death to the ope rator or other persons.
3 IMPORTA NT SA FETY INSTRUCTIONS OPERA TION 1. DO NOT put hands or feet near or under rotating parts. Keep clear of discharge area w hile engin e is running. 2. ST OP eng ine when cro ssing gravel driv es, walks, or roads, and under any conditions where t hrown o bjects might be a h azard.
4 TA BLE OF CONTENTS IMPORTA NT SAFETY INSTRUCTIONS ............................................. 2 & 3 TA BLE OF CO NTENTS ............................................................................ 4 SECTION 1 - FA MILIAR IZA TION .............
5 Section 1 - FA MILIA RIZA TION FIGURE 1.1 1.1 INTRODUCT ION This manual has been prepar ed for the operators of the SNAPPER W ALK BEHIND MOW ERS. Its purpose, aside from recom mending oper ating and routine servic e requirements , is to promote safety through the use of accepted operating practices .
6 Section 2 - OPERA TING INSTRUCTIONS 2.1 PRE-STA RT CHECK LIST Make the following c hecks and per form the service required bef ore each start-up. 2.1.1. Check guards, deflectors, gr ass bag, adapter and covers to mak e sure all are in plac e and securely tightened.
7 Section 2 - OPERA TING INSTRUCTIONS 2.2.2. PRO PELLING M OWER (Self Pr opelled Models Only) 1. Move gr ound speed control to the desired s peed position. See Figure 2.4. 2. Start engine. Ref er to Section “Starting & Operation”. 3. Move wheel dr ive control against handle to engage wheel drive and propel m ower forward.
8 Section 2 - OPERA TING INSTRUCTIONS WA RNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disco nnect spark plug wire and secure away from spark plug. Engine and compone nts are HOT. A void serious burns, allow sufficient time for all components to cool.
9 Section 3 - MA INTENA NCE 3.1 INTRODUCT ION To retain the quality of the m ower, use genuine SNAPPER replacem ent parts only. Contact a local SNAPPER dealer for parts and service assistanc e. For the cor rect part or inform ation for a particular mower, always mention m odel and serial num ber.
10 Section 3 – MA INTENA NCE 3.2.2. CHECK GREASE LEVEL IN T RA NSMISSIO N (Continued from previous page) NOTE: Do not spill gr eas e or oil on sur f ac e of drive disc. See Figure 3.3. 3. Reinstall tr ansmis sion plug. 4. Check greas e level after each 25 hours of operation.
11 Section 4 - REPA IR & A DJUSTMENTS WA RNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disco nnect spark plug wire and secure away from spark plug. Engine and compone nts are HOT.
12 Section 4 - REPA IR & A DJUSTMENTS WA RNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disco nnect spark plug wire and secure away from spark plug. Engine and compone nts are HOT.
13 Section 4 - REPA IR & A DJUSTMENTS WA RNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disco nnect spark plug wire and secure away from spark plug. Engine and compone nts are HOT.
14 Section 4 - REPA IR & A DJUSTMENTS WA RNING DO NOT attempt any maintenance, adjustmen ts or service with engine and blade running. STOP engine and blade. Disco nnect spark plug wire and secure away from spark plug. Engine and compone nts are HOT.
15 Section 4 - REPA IR & A DJUSTMENTS WA RNING DO NOT attempt any maintenance, adjustmen ts or service with engine and blade running. STOP engine and blade. Disco nnect spark plug wire and secure away from spark plug. Engine and compone nts are HOT.
16 Section 4 - REPA IR & A DJUSTMENTS WA RNING DO NOT attempt any maintenance, adjustmen ts or service with engine and blade running. STOP engine and blade. Disco nnect spark plug wire and secure away from spark plug. Engine and compone nts are HOT.
17 Section 4 - REPA IR & A DJUSTMENTS WA RNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disco nnect spark plug wire and secure away from spark plug. Engine and compone nts are HOT.
18 TROUBLESHOOTING PROBL EM PROBA BLE CA USE CORRECTIVE A CT ION Engine Will Not Start 1. Fuel tank empty. 1. Fill fuel tank with fresh fuel. Using Recoil Starter 2. Engine needs choking or priming. 2. Choke/Prime. Check Engine M anual for Instructions.
19 SERVICE SCHEDULE ITEM SERVICE PERFO RMED REF. EA CH USE 5 HRS 25 HRS 50 HRS 100 HRS EA CH SEA SON Engine Oil Check Oil Level Page 6 X Initial Oil Change Page 9 X Periodic Oil Change Page 10 X* A i r Pre-Cleaner Clean Sponge Element Engine Manual & Page 10.
20 3 YEA R LIMITED WA RRA NTY For thr ee ( 3) years from purc hase date f or the original purc haser's residential, non- com m erc ial use, SNAPPER , through any authorized SNA PPER dealer will r.
21 PRIMA RY MA INTENA NCE.
22 PRIMA RY MA INTENA NCE.
23 PRIMA RY MA INTENA NCE.
24 PRIMA RY MA INTENA NCE.
25 NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________________.
26 NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________________.
27 NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________________.
28 Safety Instructions & Operator’s Manual for 21” STEEL DECK WALK BEHIND MOWERS SERIES 12 IMPORTA NT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufac tured. The labels on those e ngines contain very important emissions informa tion and critical safety warn ings.
An important point after buying a device Snapper WP216512BV, P216012, P216512BV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper WP216512BV, P216012, P216512BV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper WP216512BV, P216012, P216512BV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper WP216512BV, P216012, P216512BV you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper WP216512BV, P216012, P216512BV will certainly help you make a decision on the purchase.
If you already are a holder of Snapper WP216512BV, P216012, P216512BV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper WP216512BV, P216012, P216512BV.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper WP216512BV, P216012, P216512BV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper WP216512BV, P216012, P216512BV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
