Instruction/ maintenance manual of the product SV25550HV, ESV25650B, SV25650B Snapper
Go to page of 16
Safety Instructions & Operator’s Manual for PUSH YARD VACUUM SERIES 0 RESIDENTIAL MODELS Model Mfg. No. SV25550HC SV25650B 7085638 7085687 COMMERCIAL M ODELS Model Mfg.
IMPORTANT SAFETY INSTRUCTIONS WARNING: This pow erful machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply w ith the following SAFETY instructions could result in serious injury or death to the operator or other persons.
IMPORTANT SAFETY INSTRUCTIONS SAFE HANDLING OF GASOLINE (Continued From Previous Page) 3. DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling.
4 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIO NS ........................................................................ 2-3 TABLE OF CO NTENTS ..................................................................................................... 4 SETUP INST RUCTIONS .
5 SETUP INSTRUCTIONS The majority of the assembly has been co mpleted at the factory. After removing the machine from the shipping container you will be required to unfold the handles, attach the debris bag, and insert the accessory plug into the vacuum nozzle.
6 Section 1 – FAMILIARIZATION FIGURE 1.1 1.1 INTRODUCTION This manual has been prepared for the operator’s of the Yard Vacuum. Its purpose, aside from recommending standard operating procedures and routine service requirements, is to promote SAFETY through the use of accepted operating practices.
7 Section 1 – FAMILIARIZATION 1.3 SAFETY AND INSTRUCTION LABELS The safety and instruction labels included with your Yard Vacuum are very important. Read, understand and follow all instructions and warnings. Keep these labels clean and legible at all times.
8 Section 2 – OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Read, understand and follow instructions and warnings in this manual and on the machine, engine and attachments before operating. Know the controls and the proper use of the machine before starting.
9 Section 2 – OPERATING INSTRUCTIONS WARNING Entire debris bag and bag adapter must be properly installed before starting engine. The debris bag and bag adapter are subject to deterioration during normal use. Inspect frequently and replace if signs of deterioration are observed.
10 Section 3 – MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs w ith the engine running. STOP engine. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w orking on machine.
11 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w orking on machine.
12 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not 1. F ue l ta nk e mp ty . 1. Fill fuel tank with fresh fuel to proper level. Start Using 2. Engine needs choking or priming. 2. Move control to “CHOKE”, press primer. Recoil Starter 3.
13 MAINTENANCE SCHEDULE SUBJECT SERVICE TO BE PERFORMED REFERENCE PAGES EACH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS EACH SEA SON Engine Check Oil Level Page 8 X Engine Initial Oil Change Page 10 X En.
14 PRODUCT REGISTRATION FORM IMPORTANT: KEEP THIS INFORMATION FOR YOUR PERSONAL RECORDS (Complete the following inform ation on your new purchase) Model _______________________________________________.
15 NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________________.
16 Safety Instructions & Operator’s Manual for PUSH YARD VACUUM SERIES 0 IMPORTANT These products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety w arnings.
An important point after buying a device Snapper SV25550HV, ESV25650B, SV25650B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper SV25550HV, ESV25650B, SV25650B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper SV25550HV, ESV25650B, SV25650B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper SV25550HV, ESV25650B, SV25650B you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper SV25550HV, ESV25650B, SV25650B will certainly help you make a decision on the purchase.
If you already are a holder of Snapper SV25550HV, ESV25650B, SV25650B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper SV25550HV, ESV25650B, SV25650B.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper SV25550HV, ESV25650B, SV25650B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper SV25550HV, ESV25650B, SV25650B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
