Instruction/ maintenance manual of the product Snow Thowers Snapper
Go to page of 4
CUT CA BLE TIES ON BOTH HA NDLES DO NOT CUT CONTROL CA BLE CUT CA BLE TIE THA T SECU RES CHUTE CRA NK CHUTE CRA NK LOOSEN N UT REMOVE CA RDBOA RD DEA LER SET-UP INSTRUCTIONS and PRE-SA LE CHECKLIST fo.
2 STEP 5: CONTROL ROD: : Cut wire ties that secure the ground speed contr ol handle and control rods . Secure both halves of the gr ound speed control rod together . IMPO RTANT: Mak e s ure alignm ent tab and slot on the two rod halves are engaged together.
3 STEP 9: A DJUSTM ENT – CONT ROL C A BLE S: Both clutc h cables s hould be s lack when the control levers are r eleased. T he cable spring on eac h control should stretch 3/8" when each lever is depress ed. To adjust cable, loosen lock ing nut and turn cable connector as needed to obtain the 3/8" extension.
4 DEA LER PRE-SA LE CHECKLIST The follow ing must be accomplished upon the sale of the snow thrower. It is v ery important that the Dealer performs and acco mplishes the set- up and th e operational test s as listed below. Check ( ✓ ) items actually performed and s igned on this page.
An important point after buying a device Snapper Snow Thowers (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper Snow Thowers yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper Snow Thowers - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper Snow Thowers you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper Snow Thowers will certainly help you make a decision on the purchase.
If you already are a holder of Snapper Snow Thowers, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper Snow Thowers.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper Snow Thowers. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper Snow Thowers along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
