Instruction/ maintenance manual of the product SERIES G L T145H33GBV Snapper
Go to page of 176
Safety Instructions & Operator's Manual for LAWN TRA C TOR HYDROSTA TIC DRIVE SERIES G MODELS HYDROSTA TIC DRIVE L T145H33GBV L T145H38GBV L T150H38GKV MODEL NUMBER EXPLANATION ILTI 1 MODEL D.
IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons.
IMPORTANT SAFETY INSTRUCTIONS PREPARATION (Continued From Previous Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP machine if anyone enters the area. 8. Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .......... 2 - 3 TABLE OF CONTENTS ........................................ 4 SECTION 1 - FAMILIARIZATION ......................... 5 Components ........................................................ 5 Controls .
Section 1 - FAMILIARIZATION PARK BRAKE LEVER CUTTING HEIGHT ADJUSTMENT LEVER SEAT ADJUSTMENT KNOB CONTROL PANEL OPERATOR'S STEERING WHEEL SPEED LEVER BATTERY (UNDERSEAT) DASHBOARD CONTROLS FUEL TANK (UNDER HOOD) HOOD OVERRIDE LEVER BLADE ENGAGEMENT LEVER DISCHARGE DEFLECTOR HEADLIGHTS MOWING DECK (33" SHOWN) ENGINE FIGURE 1.
Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECKLIST Make the following checks and perform service as required before each start-up. 2.1.1. Check tires and add air as needed to bring pressure to 12 P.S.I. in front tires and 12 P.S.I. in rear tires.
Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION 2.3.1. STARTING ENGINE 1. Take a comfortable position in seat of machine, look around to make sure that the area you are going to mow is clear of people, children and pets.
Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION (continued) 2.3.2. STARTING WHEEL DRIVE 1. Shift speed control lever to neutral. 2. Start engine. Refer to Section "STARTING ENGINE". 3. Release clutch/brake pedal. 4. Slowly shift speed control lever forward for forward motion or to the rear for reverse motion.
Section 2 - OPERATING INSTRUCTIONS 2.4 STOPPING 2.4.3. STOPPING MOWER BLADE 1. Stop mower blade by moving blade engagement lever down to the "OFF" position. See Figure 2.11. BLADE j LEVER ! OFF FIGURE 2.11 WARNING Once blade is disengaged, it should come to a complete stop in 5 seconds or less.
Section 2 - OPERATING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF 2.6.1. Rolling Hydro Models 1. With engine "OFF", move to rear of tractor. 2. Pull the roll release control all the way out to disengage the hydro transmission. See Figure 2.
Section 2 - OPERATING INSTRUCTIONS 2.7. REVERSE LOCKOUT MECHANISM Data indicates that tragic back-over accidents occur each year. These accidents usually involve unsupervised children.
Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the Tractor, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particularTractor, always mentbn the model and serial number.
Section 3 - MAINTENANCE 3.2.3. CHECK MOWER BLADE (Continued) TORQUE 38" BLADES TO 70 TO 80 FT. LBS. FIGURE 3.3 3.2.4. CHECK 33" DECK DRIVE BELT 1. With engine "OFF". move blade engagement lever to "ON". 2. Measure blade cable extension spring.
Section 3 - MAINTENANCE 3.3.4. TRACTOR LUBRICATION 1. Front Wheel Bearings Lubricate each front wheel bearing through the grease fitting on wheel hub. Using general purpose grease in a grease gun, add grease until grease purges from bearing. See Figure 3.
Section 3 - MAINTENANCE 3.3.4. TRACTOR LUBRICATION (Continued From Previous Page) 7. Steering Tie Rod Lubricate both ends of steering tie rod with a small amount of SAE30 oil.
Section 3 - MAINTENANCE 3.4 SERVICE - ANNUALLY 3.4.2. FUEL FILTER (Continued From Previous Page) 3. Install new fuel filter part number 1-4359. Figure 3.14. See NEW FUEL FILTER PART NUMBER 1-4359 FIGURE 3.14 4. Fill fuel tank with fresh gasoline. Refer to engine owner's manual for fuel specifications.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR 4.2.4. ADJUSTING MOWER BLADE- 33" DECK (Continued from previous page) MEASURE THE DISTANCE BETWEEN DECK LIP AND BLADE TIP FIGURE 4.5 WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR 4.3.4. TRACTION DRIVE BELT ADJUSTMENT Should a gradual loss of traction be noticed, it may be necessary to adjust the traction drive belt tension, Adjust as follows: 1. Move tractor to a firm, level surface, 2. Turn engine"OFF", Remove key.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR _, WARNING _k DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR 4.5 BATTERY 4.5.1. BATTERY REMOVAL 1. Raise operator's seat. 2. Remove the two adjusting knobs. 3. Remove seat assembly and move forward. Use care not to disconnect wires from seat switch. See Figure 4.41. KNOBS AND MOVE / / FIGURE 4.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT OVERFILL! DO NOT attempt to service or I charge the battery while it is installed on the machine. DO NOT use "BOOST" chargers on the battery. I 4.5.5. BATTERY TESTING There are two types of battery tests: Unloaded and Loaded.
Section 4 - ADJUSTMENT & REPAIR AVAILABLE ACCESSORIES The SNAPPER Series F LAWN TRACTOR can be equipped with a variety of accessories that increase its versatility. The accessories available for each model are listed in the chart below. Contact an authorized SNAPPER dealer for ordering any of the accessories desired.
SECTION 5- ELECTRICAL SYSTEM ELECTRICAL- B&S Engines NOTE: Switches shown with, Pedal locked down t----(NC when Blade disengaged BLACK _off seat) Seat vacant IGNITION PEDAL I PTO I _ SEAT ANTI-AFTER FIRE GROUND SWITCH I SWITCH i _ SWITCH SOLENOID / .
TROUBLESHOOTING GUIDE PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Starter Will Not 1. Battery dead. 1. Service battery. Crank Engine 2. Blown fuse. 2. Replace fuse. 3. Electrical connections loose or corroded. 3. Clean and check connections for good contact.
TROUBLESHOOTING GUIDE (Continued From Previous Page) PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Tractor Will Not 1. Speed control handle in the neutral "N" 1. Place speed control in desired speed. Move Or Loss Of position. Traction 2. Roll release control in "ROLL" position.
SUBJECT Engine Engine Engine Air Pre-Cleaner Air Cleaner Spark Plug Fuel Filter Engine Cooling System Battery Battery Tires Drive Belts Mower Blades Mower Deck Mower Deck Lubrication Points Hydrostatic Trans.
3 YEAR LIMITED WARRANTY For three (3) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of c.
PRIMARY MAINTENANCE an illustration of how dirt can ge your engine & how reasonable maintenance can protect it! Snapper uses the best avail- engines and components m in their products in order to 4_ provide long, satisfactory service. However, proper , care is essential In prolonging engine life.
PRIMARY MAINTENANCE gulp about 12,000 gallons of air for every gallon used. Because of its working environ- ment, the air available to your Snapper engine Is " heavily saturated with air- borne dirt particles.
PRIMARY MAINTENANCE I Generally, wash foam-type filters In a dishwashlng detergent and water solution. Rinse and wring dry, then saturate with oil and squeeze out excess. Failure to re-off this type filter will ruin the engine. Clean paper elements by tapping lightly.
PRIMARY MAINTENANCE On 4-cyle engines with an oll level plug, don't be fooled into thinking the engine has sufficient lubricating oii if you can see "some" oil in the opening - the leve.
SERVICE NOTES 42.
SERVICE NOTES 43.
Safety Instructions & Operator's Manual for LAWN TRA C TOR HYDROSTA TIC DRIVE SERIES G IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings.
Safety Instructions & Operator's Manual for LAWN TRA C TOR HYDROSTA TIC DRIVE SERIES G MODELS HYDROSTA TIC DRIVE L T145H33GBV L T145H38GBV L T150H38GKV MODEL NUMBER EXPLANATION ILTI 1 MODEL D.
IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons.
IMPORTANT SAFETY INSTRUCTIONS PREPARATION (Continued From Previous Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP machine if anyone enters the area. 8. Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .......... 2 - 3 TABLE OF CONTENTS ........................................ 4 SECTION 1 - FAMILIARIZATION ......................... 5 Components ........................................................ 5 Controls .
Section 1 - FAMILIARIZATION PARK BRAKE LEVER CUTTING HEIGHT ADJUSTMENT LEVER SEAT ADJUSTMENT KNOB CONTROL PANEL OPERATOR'S STEERING WHEEL SPEED LEVER BATTERY (UNDERSEAT) DASHBOARD CONTROLS FUEL TANK (UNDER HOOD) HOOD OVERRIDE LEVER BLADE ENGAGEMENT LEVER DISCHARGE DEFLECTOR HEADLIGHTS MOWING DECK (33" SHOWN) ENGINE FIGURE 1.
Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECKLIST Make the following checks and perform service as required before each start-up. 2.1.1. Check tires and add air as needed to bring pressure to 12 P.S.I. in front tires and 12 P.S.I. in rear tires.
Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION 2.3.1. STARTING ENGINE 1. Take a comfortable position in seat of machine, look around to make sure that the area you are going to mow is clear of people, children and pets.
Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION (continued) 2.3.2. STARTING WHEEL DRIVE 1. Shift speed control lever to neutral. 2. Start engine. Refer to Section "STARTING ENGINE". 3. Release clutch/brake pedal. 4. Slowly shift speed control lever forward for forward motion or to the rear for reverse motion.
Section 2 - OPERATING INSTRUCTIONS 2.4 STOPPING 2.4.3. STOPPING MOWER BLADE 1. Stop mower blade by moving blade engagement lever down to the "OFF" position. See Figure 2.11. BLADE j LEVER ! OFF FIGURE 2.11 WARNING Once blade is disengaged, it should come to a complete stop in 5 seconds or less.
Section 2 - OPERATING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF 2.6.1. Rolling Hydro Models 1. With engine "OFF", move to rear of tractor. 2. Pull the roll release control all the way out to disengage the hydro transmission. See Figure 2.
Section 2 - OPERATING INSTRUCTIONS 2.7. REVERSE LOCKOUT MECHANISM Data indicates that tragic back-over accidents occur each year. These accidents usually involve unsupervised children.
Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the Tractor, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particularTractor, always mentbn the model and serial number.
Section 3 - MAINTENANCE 3.2.3. CHECK MOWER BLADE (Continued) TORQUE 38" BLADES TO 70 TO 80 FT. LBS. FIGURE 3.3 3.2.4. CHECK 33" DECK DRIVE BELT 1. With engine "OFF". move blade engagement lever to "ON". 2. Measure blade cable extension spring.
Section 3 - MAINTENANCE 3.3.4. TRACTOR LUBRICATION 1. Front Wheel Bearings Lubricate each front wheel bearing through the grease fitting on wheel hub. Using general purpose grease in a grease gun, add grease until grease purges from bearing. See Figure 3.
Section 3 - MAINTENANCE 3.3.4. TRACTOR LUBRICATION (Continued From Previous Page) 7. Steering Tie Rod Lubricate both ends of steering tie rod with a small amount of SAE30 oil.
Section 3 - MAINTENANCE 3.4 SERVICE - ANNUALLY 3.4.2. FUEL FILTER (Continued From Previous Page) 3. Install new fuel filter part number 1-4359. Figure 3.14. See NEW FUEL FILTER PART NUMBER 1-4359 FIGURE 3.14 4. Fill fuel tank with fresh gasoline. Refer to engine owner's manual for fuel specifications.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR 4.2.4. ADJUSTING MOWER BLADE- 33" DECK (Continued from previous page) MEASURE THE DISTANCE BETWEEN DECK LIP AND BLADE TIP FIGURE 4.5 WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR 4.3.4. TRACTION DRIVE BELT ADJUSTMENT Should a gradual loss of traction be noticed, it may be necessary to adjust the traction drive belt tension, Adjust as follows: 1. Move tractor to a firm, level surface, 2. Turn engine"OFF", Remove key.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR _, WARNING _k DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR 4.5 BATTERY 4.5.1. BATTERY REMOVAL 1. Raise operator's seat. 2. Remove the two adjusting knobs. 3. Remove seat assembly and move forward. Use care not to disconnect wires from seat switch. See Figure 4.41. KNOBS AND MOVE / / FIGURE 4.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT OVERFILL! DO NOT attempt to service or I charge the battery while it is installed on the machine. DO NOT use "BOOST" chargers on the battery. I 4.5.5. BATTERY TESTING There are two types of battery tests: Unloaded and Loaded.
Section 4 - ADJUSTMENT & REPAIR AVAILABLE ACCESSORIES The SNAPPER Series F LAWN TRACTOR can be equipped with a variety of accessories that increase its versatility. The accessories available for each model are listed in the chart below. Contact an authorized SNAPPER dealer for ordering any of the accessories desired.
SECTION 5- ELECTRICAL SYSTEM ELECTRICAL- B&S Engines NOTE: Switches shown with, Pedal locked down t----(NC when Blade disengaged BLACK _off seat) Seat vacant IGNITION PEDAL I PTO I _ SEAT ANTI-AFTER FIRE GROUND SWITCH I SWITCH i _ SWITCH SOLENOID / .
TROUBLESHOOTING GUIDE PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Starter Will Not 1. Battery dead. 1. Service battery. Crank Engine 2. Blown fuse. 2. Replace fuse. 3. Electrical connections loose or corroded. 3. Clean and check connections for good contact.
TROUBLESHOOTING GUIDE (Continued From Previous Page) PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Tractor Will Not 1. Speed control handle in the neutral "N" 1. Place speed control in desired speed. Move Or Loss Of position. Traction 2. Roll release control in "ROLL" position.
SUBJECT Engine Engine Engine Air Pre-Cleaner Air Cleaner Spark Plug Fuel Filter Engine Cooling System Battery Battery Tires Drive Belts Mower Blades Mower Deck Mower Deck Lubrication Points Hydrostatic Trans.
3 YEAR LIMITED WARRANTY For three (3) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of c.
PRIMARY MAINTENANCE an illustration of how dirt can ge your engine & how reasonable maintenance can protect it! Snapper uses the best avail- engines and components m in their products in order to 4_ provide long, satisfactory service. However, proper , care is essential In prolonging engine life.
PRIMARY MAINTENANCE gulp about 12,000 gallons of air for every gallon used. Because of its working environ- ment, the air available to your Snapper engine Is " heavily saturated with air- borne dirt particles.
PRIMARY MAINTENANCE I Generally, wash foam-type filters In a dishwashlng detergent and water solution. Rinse and wring dry, then saturate with oil and squeeze out excess. Failure to re-off this type filter will ruin the engine. Clean paper elements by tapping lightly.
PRIMARY MAINTENANCE On 4-cyle engines with an oll level plug, don't be fooled into thinking the engine has sufficient lubricating oii if you can see "some" oil in the opening - the leve.
SERVICE NOTES 42.
SERVICE NOTES 43.
Safety Instructions & Operator's Manual for LAWN TRA C TOR HYDROSTA TIC DRIVE SERIES G IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings.
Safety Instructions & Operator's Manual for LAWN TRA C TOR HYDROSTA TIC DRIVE SERIES G MODELS HYDROSTA TIC DRIVE L T145H33GBV L T145H38GBV L T150H38GKV MODEL NUMBER EXPLANATION ILTI 1 MODEL D.
IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons.
IMPORTANT SAFETY INSTRUCTIONS PREPARATION (Continued From Previous Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP machine if anyone enters the area. 8. Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .......... 2 - 3 TABLE OF CONTENTS ........................................ 4 SECTION 1 - FAMILIARIZATION ......................... 5 Components ........................................................ 5 Controls .
Section 1 - FAMILIARIZATION PARK BRAKE LEVER CUTTING HEIGHT ADJUSTMENT LEVER SEAT ADJUSTMENT KNOB CONTROL PANEL OPERATOR'S STEERING WHEEL SPEED LEVER BATTERY (UNDERSEAT) DASHBOARD CONTROLS FUEL TANK (UNDER HOOD) HOOD OVERRIDE LEVER BLADE ENGAGEMENT LEVER DISCHARGE DEFLECTOR HEADLIGHTS MOWING DECK (33" SHOWN) ENGINE FIGURE 1.
Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECKLIST Make the following checks and perform service as required before each start-up. 2.1.1. Check tires and add air as needed to bring pressure to 12 P.S.I. in front tires and 12 P.S.I. in rear tires.
Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION 2.3.1. STARTING ENGINE 1. Take a comfortable position in seat of machine, look around to make sure that the area you are going to mow is clear of people, children and pets.
Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION (continued) 2.3.2. STARTING WHEEL DRIVE 1. Shift speed control lever to neutral. 2. Start engine. Refer to Section "STARTING ENGINE". 3. Release clutch/brake pedal. 4. Slowly shift speed control lever forward for forward motion or to the rear for reverse motion.
Section 2 - OPERATING INSTRUCTIONS 2.4 STOPPING 2.4.3. STOPPING MOWER BLADE 1. Stop mower blade by moving blade engagement lever down to the "OFF" position. See Figure 2.11. BLADE j LEVER ! OFF FIGURE 2.11 WARNING Once blade is disengaged, it should come to a complete stop in 5 seconds or less.
Section 2 - OPERATING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF 2.6.1. Rolling Hydro Models 1. With engine "OFF", move to rear of tractor. 2. Pull the roll release control all the way out to disengage the hydro transmission. See Figure 2.
Section 2 - OPERATING INSTRUCTIONS 2.7. REVERSE LOCKOUT MECHANISM Data indicates that tragic back-over accidents occur each year. These accidents usually involve unsupervised children.
Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the Tractor, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particularTractor, always mentbn the model and serial number.
Section 3 - MAINTENANCE 3.2.3. CHECK MOWER BLADE (Continued) TORQUE 38" BLADES TO 70 TO 80 FT. LBS. FIGURE 3.3 3.2.4. CHECK 33" DECK DRIVE BELT 1. With engine "OFF". move blade engagement lever to "ON". 2. Measure blade cable extension spring.
Section 3 - MAINTENANCE 3.3.4. TRACTOR LUBRICATION 1. Front Wheel Bearings Lubricate each front wheel bearing through the grease fitting on wheel hub. Using general purpose grease in a grease gun, add grease until grease purges from bearing. See Figure 3.
Section 3 - MAINTENANCE 3.3.4. TRACTOR LUBRICATION (Continued From Previous Page) 7. Steering Tie Rod Lubricate both ends of steering tie rod with a small amount of SAE30 oil.
Section 3 - MAINTENANCE 3.4 SERVICE - ANNUALLY 3.4.2. FUEL FILTER (Continued From Previous Page) 3. Install new fuel filter part number 1-4359. Figure 3.14. See NEW FUEL FILTER PART NUMBER 1-4359 FIGURE 3.14 4. Fill fuel tank with fresh gasoline. Refer to engine owner's manual for fuel specifications.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR 4.2.4. ADJUSTING MOWER BLADE- 33" DECK (Continued from previous page) MEASURE THE DISTANCE BETWEEN DECK LIP AND BLADE TIP FIGURE 4.5 WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR 4.3.4. TRACTION DRIVE BELT ADJUSTMENT Should a gradual loss of traction be noticed, it may be necessary to adjust the traction drive belt tension, Adjust as follows: 1. Move tractor to a firm, level surface, 2. Turn engine"OFF", Remove key.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR _, WARNING _k DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR 4.5 BATTERY 4.5.1. BATTERY REMOVAL 1. Raise operator's seat. 2. Remove the two adjusting knobs. 3. Remove seat assembly and move forward. Use care not to disconnect wires from seat switch. See Figure 4.41. KNOBS AND MOVE / / FIGURE 4.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT OVERFILL! DO NOT attempt to service or I charge the battery while it is installed on the machine. DO NOT use "BOOST" chargers on the battery. I 4.5.5. BATTERY TESTING There are two types of battery tests: Unloaded and Loaded.
Section 4 - ADJUSTMENT & REPAIR AVAILABLE ACCESSORIES The SNAPPER Series F LAWN TRACTOR can be equipped with a variety of accessories that increase its versatility. The accessories available for each model are listed in the chart below. Contact an authorized SNAPPER dealer for ordering any of the accessories desired.
SECTION 5- ELECTRICAL SYSTEM ELECTRICAL- B&S Engines NOTE: Switches shown with, Pedal locked down t----(NC when Blade disengaged BLACK _off seat) Seat vacant IGNITION PEDAL I PTO I _ SEAT ANTI-AFTER FIRE GROUND SWITCH I SWITCH i _ SWITCH SOLENOID / .
TROUBLESHOOTING GUIDE PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Starter Will Not 1. Battery dead. 1. Service battery. Crank Engine 2. Blown fuse. 2. Replace fuse. 3. Electrical connections loose or corroded. 3. Clean and check connections for good contact.
TROUBLESHOOTING GUIDE (Continued From Previous Page) PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Tractor Will Not 1. Speed control handle in the neutral "N" 1. Place speed control in desired speed. Move Or Loss Of position. Traction 2. Roll release control in "ROLL" position.
SUBJECT Engine Engine Engine Air Pre-Cleaner Air Cleaner Spark Plug Fuel Filter Engine Cooling System Battery Battery Tires Drive Belts Mower Blades Mower Deck Mower Deck Lubrication Points Hydrostatic Trans.
3 YEAR LIMITED WARRANTY For three (3) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of c.
PRIMARY MAINTENANCE an illustration of how dirt can ge your engine & how reasonable maintenance can protect it! Snapper uses the best avail- engines and components m in their products in order to 4_ provide long, satisfactory service. However, proper , care is essential In prolonging engine life.
PRIMARY MAINTENANCE gulp about 12,000 gallons of air for every gallon used. Because of its working environ- ment, the air available to your Snapper engine Is " heavily saturated with air- borne dirt particles.
PRIMARY MAINTENANCE I Generally, wash foam-type filters In a dishwashlng detergent and water solution. Rinse and wring dry, then saturate with oil and squeeze out excess. Failure to re-off this type filter will ruin the engine. Clean paper elements by tapping lightly.
PRIMARY MAINTENANCE On 4-cyle engines with an oll level plug, don't be fooled into thinking the engine has sufficient lubricating oii if you can see "some" oil in the opening - the leve.
SERVICE NOTES 42.
SERVICE NOTES 43.
Safety Instructions & Operator's Manual for LAWN TRA C TOR HYDROSTA TIC DRIVE SERIES G IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings.
Safety Instructions & Operator's Manual for LAWN TRA C TOR HYDROSTA TIC DRIVE SERIES G MODELS HYDROSTA TIC DRIVE L T145H33GBV L T145H38GBV L T150H38GKV MODEL NUMBER EXPLANATION ILTI 1 MODEL D.
IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons.
IMPORTANT SAFETY INSTRUCTIONS PREPARATION (Continued From Previous Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP machine if anyone enters the area. 8. Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .......... 2 - 3 TABLE OF CONTENTS ........................................ 4 SECTION 1 - FAMILIARIZATION ......................... 5 Components ........................................................ 5 Controls .
Section 1 - FAMILIARIZATION PARK BRAKE LEVER CUTTING HEIGHT ADJUSTMENT LEVER SEAT ADJUSTMENT KNOB CONTROL PANEL OPERATOR'S STEERING WHEEL SPEED LEVER BATTERY (UNDERSEAT) DASHBOARD CONTROLS FUEL TANK (UNDER HOOD) HOOD OVERRIDE LEVER BLADE ENGAGEMENT LEVER DISCHARGE DEFLECTOR HEADLIGHTS MOWING DECK (33" SHOWN) ENGINE FIGURE 1.
Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECKLIST Make the following checks and perform service as required before each start-up. 2.1.1. Check tires and add air as needed to bring pressure to 12 P.S.I. in front tires and 12 P.S.I. in rear tires.
Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION 2.3.1. STARTING ENGINE 1. Take a comfortable position in seat of machine, look around to make sure that the area you are going to mow is clear of people, children and pets.
Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION (continued) 2.3.2. STARTING WHEEL DRIVE 1. Shift speed control lever to neutral. 2. Start engine. Refer to Section "STARTING ENGINE". 3. Release clutch/brake pedal. 4. Slowly shift speed control lever forward for forward motion or to the rear for reverse motion.
Section 2 - OPERATING INSTRUCTIONS 2.4 STOPPING 2.4.3. STOPPING MOWER BLADE 1. Stop mower blade by moving blade engagement lever down to the "OFF" position. See Figure 2.11. BLADE j LEVER ! OFF FIGURE 2.11 WARNING Once blade is disengaged, it should come to a complete stop in 5 seconds or less.
Section 2 - OPERATING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF 2.6.1. Rolling Hydro Models 1. With engine "OFF", move to rear of tractor. 2. Pull the roll release control all the way out to disengage the hydro transmission. See Figure 2.
Section 2 - OPERATING INSTRUCTIONS 2.7. REVERSE LOCKOUT MECHANISM Data indicates that tragic back-over accidents occur each year. These accidents usually involve unsupervised children.
Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the Tractor, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particularTractor, always mentbn the model and serial number.
Section 3 - MAINTENANCE 3.2.3. CHECK MOWER BLADE (Continued) TORQUE 38" BLADES TO 70 TO 80 FT. LBS. FIGURE 3.3 3.2.4. CHECK 33" DECK DRIVE BELT 1. With engine "OFF". move blade engagement lever to "ON". 2. Measure blade cable extension spring.
Section 3 - MAINTENANCE 3.3.4. TRACTOR LUBRICATION 1. Front Wheel Bearings Lubricate each front wheel bearing through the grease fitting on wheel hub. Using general purpose grease in a grease gun, add grease until grease purges from bearing. See Figure 3.
Section 3 - MAINTENANCE 3.3.4. TRACTOR LUBRICATION (Continued From Previous Page) 7. Steering Tie Rod Lubricate both ends of steering tie rod with a small amount of SAE30 oil.
Section 3 - MAINTENANCE 3.4 SERVICE - ANNUALLY 3.4.2. FUEL FILTER (Continued From Previous Page) 3. Install new fuel filter part number 1-4359. Figure 3.14. See NEW FUEL FILTER PART NUMBER 1-4359 FIGURE 3.14 4. Fill fuel tank with fresh gasoline. Refer to engine owner's manual for fuel specifications.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR 4.2.4. ADJUSTING MOWER BLADE- 33" DECK (Continued from previous page) MEASURE THE DISTANCE BETWEEN DECK LIP AND BLADE TIP FIGURE 4.5 WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR 4.3.4. TRACTION DRIVE BELT ADJUSTMENT Should a gradual loss of traction be noticed, it may be necessary to adjust the traction drive belt tension, Adjust as follows: 1. Move tractor to a firm, level surface, 2. Turn engine"OFF", Remove key.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR _, WARNING _k DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR 4.5 BATTERY 4.5.1. BATTERY REMOVAL 1. Raise operator's seat. 2. Remove the two adjusting knobs. 3. Remove seat assembly and move forward. Use care not to disconnect wires from seat switch. See Figure 4.41. KNOBS AND MOVE / / FIGURE 4.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT OVERFILL! DO NOT attempt to service or I charge the battery while it is installed on the machine. DO NOT use "BOOST" chargers on the battery. I 4.5.5. BATTERY TESTING There are two types of battery tests: Unloaded and Loaded.
Section 4 - ADJUSTMENT & REPAIR AVAILABLE ACCESSORIES The SNAPPER Series F LAWN TRACTOR can be equipped with a variety of accessories that increase its versatility. The accessories available for each model are listed in the chart below. Contact an authorized SNAPPER dealer for ordering any of the accessories desired.
SECTION 5- ELECTRICAL SYSTEM ELECTRICAL- B&S Engines NOTE: Switches shown with, Pedal locked down t----(NC when Blade disengaged BLACK _off seat) Seat vacant IGNITION PEDAL I PTO I _ SEAT ANTI-AFTER FIRE GROUND SWITCH I SWITCH i _ SWITCH SOLENOID / .
TROUBLESHOOTING GUIDE PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Starter Will Not 1. Battery dead. 1. Service battery. Crank Engine 2. Blown fuse. 2. Replace fuse. 3. Electrical connections loose or corroded. 3. Clean and check connections for good contact.
TROUBLESHOOTING GUIDE (Continued From Previous Page) PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Tractor Will Not 1. Speed control handle in the neutral "N" 1. Place speed control in desired speed. Move Or Loss Of position. Traction 2. Roll release control in "ROLL" position.
SUBJECT Engine Engine Engine Air Pre-Cleaner Air Cleaner Spark Plug Fuel Filter Engine Cooling System Battery Battery Tires Drive Belts Mower Blades Mower Deck Mower Deck Lubrication Points Hydrostatic Trans.
3 YEAR LIMITED WARRANTY For three (3) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of c.
PRIMARY MAINTENANCE an illustration of how dirt can ge your engine & how reasonable maintenance can protect it! Snapper uses the best avail- engines and components m in their products in order to 4_ provide long, satisfactory service. However, proper , care is essential In prolonging engine life.
PRIMARY MAINTENANCE gulp about 12,000 gallons of air for every gallon used. Because of its working environ- ment, the air available to your Snapper engine Is " heavily saturated with air- borne dirt particles.
PRIMARY MAINTENANCE I Generally, wash foam-type filters In a dishwashlng detergent and water solution. Rinse and wring dry, then saturate with oil and squeeze out excess. Failure to re-off this type filter will ruin the engine. Clean paper elements by tapping lightly.
PRIMARY MAINTENANCE On 4-cyle engines with an oll level plug, don't be fooled into thinking the engine has sufficient lubricating oii if you can see "some" oil in the opening - the leve.
SERVICE NOTES 42.
SERVICE NOTES 43.
Safety Instructions & Operator's Manual for LAWN TRA C TOR HYDROSTA TIC DRIVE SERIES G IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings.
An important point after buying a device Snapper SERIES G L T145H33GBV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper SERIES G L T145H33GBV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper SERIES G L T145H33GBV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper SERIES G L T145H33GBV you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper SERIES G L T145H33GBV will certainly help you make a decision on the purchase.
If you already are a holder of Snapper SERIES G L T145H33GBV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper SERIES G L T145H33GBV.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper SERIES G L T145H33GBV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper SERIES G L T145H33GBV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center