Instruction/ maintenance manual of the product P/N 7600027 Snapper
Go to page of 24
Actual product may differ from product pictured above ASSEMBLY INSTRUCTIONS OPERATOR 'S MANUAL PA RTS L I ST Models covered: Includes Clamshell, Blower and Weight Kit s 48” Kit P/N 7600026 52” Kit P/N 7600027 61” Kit P/N 7600028 Manual No. 7100651 (I.
1 preliminaries Congratu lations ! Y ou have just purchased one of the finest pieces of out door power equipment on the market today . If properly cared for , your new Z-V ac Grass Catcher Kit will provide years of dependable service. Please read and follow this instruction man- ual carefully in order to get the most out of your new equipment.
safety rules regarding outdoor power equipment 2 TRAINING -- Read, understand, and follow all instructions in the man- ual and on the unit before starting. If the operator(s) or mechanic(s) can not read English it is the owner's responsi- bility to explain this material to them.
2 safety rules regarding outdoor power equipment CHILDREN T ragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and its activity . Never assume that children will remain where you last saw them.
unit assembly 3 STEP 1: Remove pin, rod and spring securing dis- charge deflector to mower deck, and remove deflector . Set rod and pin aside for future assem- bly step. S tore deflector for future use. IMPOR- T ANT : Never operate mower without discharge deflector or grass catcher securely in place.
3 unit assembly 6 STEP 7: Slip tube of locking pin bracket into blow- er mount, and secure with T -handle pin, making sure pin goes through both upper and lower holes in blower mount. Then align base of pin bracket parallel with rear of deck, and, using bracket as a template, drill two 7/16” holes through deck.
STEP 9: Install belt guard between pulley guard and belt guard support clip on front part of blower mount. Secure with two 5/16 nylon wing nuts. T ighten nuts securely . !! W arning: W eight kit must be inst alled prior to inst alling clamshell kit. Failure to do so may result in longitudal tipping of unit.
STEP 15: Hook the large hole of each actuating arm onto the hook on each side of the rear cover . Then secure the other end of the arm onto the inside of each side of the handle weldment with one 3/8-16 x 2” hex bolt and nyloc nut. T ighten snugly .
STEP 16: Slip one hose clamp onto each side of discharge hose, and install hose between blower and clamshell. NOTE: Install hose so that clamp with nut is on the clamshell side, and the clamp with the black quick-release knob is on the blower side. T ighten both clamps securely .
4 unit operation & maintenance 10 IF THE GRASS CA TCHER BECOMES CLOGGED (Continued From Previous Page) 2. Empty catcher more often. 3. Clean screen on rear cover assembly . 4. Ground speed too fast – cut at slower speed. 5. Removing too much grass – raise cutting height, cut partial wid th, and cut lawn more frequently .
warranty statement 5 11 2 YEAR LIMITED W ARRANTY For two (2) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer .
6 unit breakdown & parts list 12.
Snapper Z-Vac Blower Unit Group 48”, 52”, 61” Models Item Part No. Qty Description 1 3046782 1 WELDMENT , Blower Belt Guard 2 91 121 1 NUT , 1/2-13 Hex Nyloc 3 90183 1 W ASHER, 1/2" Flat SA.
6 unit breakdown & parts list 14.
Snapper Z-Vac Blower Mount Group 48”, 52”, 61” Models Item Part No. Qty Description 1 3036323 1 BEL T , A Section, 91.125" effective length (used on 48” & 52” Models) 1 3022844 1 BEL T , A Section, 92.
6 unit breakdown & parts list 16.
Snapper Z-Vac Large Clamshell Cat cher Group Item Part No. Qty Description 1 7100564 1 COVER, Rear , Large Clamshell Bagger -- 7300365 1 SCREEN, Large Clamshell (Not Shown) -- 73525 8 RIVET , 5/32 (No.
6 unit breakdown & parts list 18.
Snapper Z-Vac Clamshell Catcher Mount Group Item Part No. Qty Description 1 50551 2 ST ANDOFF , Bumper Mount (weldment) 2 1723436 1 WELDMENT , Bumper Mount Plate 3 91318 4 SCREW , 5/16-18 x 3/4" .
6 unit breakdown & parts list 20.
Snapper Z-Vac Weight Mount Group Item Part No. Qty Description 1 3027501 1 CHANNEL, Weight Mounting 2 3046992 2 BAR, Clamp 3 91 131 4 BOL T , 3/8-16 x 4" Hex T ap, GR5 4 90546 4 NUT , 3/8-16 Hex .
6 unit breakdown & parts list 22.
Snapper Z-Vac Decal Group Item Part No. Qty Description 1 3079231 1 DECAL, Z-V ac 2 3046850 1 DECAL, Danger , Fast-V ac 3 3046851 1 DECAL, W arning, Fast V ac 4 3046883 1 DECAL, W arning, Fast-V ac 5 .
McDonough, GA 30253 U.S.A. Manual No. 7100651 (I.R. 4/5/2006) TP 900-5178-IR-A T -N ASSEMBLY INSTRUCTIONS OPERATOR 'S MANUAL PA RTS L I ST Z - V A C Large Clamshell Grass Catcher Kit for NZM Mid .
An important point after buying a device Snapper P/N 7600027 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper P/N 7600027 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper P/N 7600027 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper P/N 7600027 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper P/N 7600027 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper P/N 7600027, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper P/N 7600027.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper P/N 7600027. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper P/N 7600027 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
