Instruction/ maintenance manual of the product Mount Mower Snapper
Go to page of 4
1 SET-UP INSTRUCTIONS & PRE-OPERATION CHECKLIST SNAPPER ZERO TURNING Z-RIDER with MID MOUNT MOWER INTRODUCTION: These instructions cover the set-up of the Snapper Mid Mount Z-Rider Mower. Complete each of the follow ing steps carefully. Rev iew and complete each item as instructed on the Pre-Operation checklist.
2 FIGURE 3 STEP 6: Take the necessary precautions, when handling fuel. Fill the fuel tank with clean fuel. Check oil and add oil if needed as stated in Engine Owners Manual. Move fuel tank selector valve handle to the desired fuel tank. WARNING H a n d l e f u e l wi t h c a r e ! Use an approved fuel container.
3 FIGURE 4 STEP 10: HYDRAULIC SYSTEM, PURGING When initially putting hydraulic system into service, one or both of the wheel drives may not pull properly.
4 PRE-OPERATION CHECKLIST Snapper has completed initial ad justments and performed operational tests prior to sh ipping the machine. Due to the possible effect s of shipping, handling and storage, Sna pper intends for all of the follow ing item s to be v erified and necessary final adjustments made at time of setup.
An important point after buying a device Snapper Mount Mower (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper Mount Mower yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper Mount Mower - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper Mount Mower you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper Mount Mower will certainly help you make a decision on the purchase.
If you already are a holder of Snapper Mount Mower, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper Mount Mower.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper Mount Mower. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper Mount Mower along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
