Instruction/ maintenance manual of the product LE3171R, LE3191R, LE3191E Snapper
Go to page of 18
Safety Instructions & Operator’s Manual for L.E. SINGLE STAGE SMALL FRAME SNOW THROWER SERIES 1 MODELS LE3171R LE3191R LE3191E MODEL NUMBER EXPLANATION L E 3 19 1 E MODEL DESIGNATION ENGINE OPTI.
2 IMPORTANT SAFETY INSTRUCTIONS WARNING: This pow erful machine is capable of amputating hands and feet and can throw objects that can cause i n j u r y a n d d am a g e! Failure to comply with the follow ing instructions may result in serious injury to the operator or other persons.
3 IMPORTANT SAFETY INSTRUCTIONS OPERATIONAL PRECAUTIONS 7. Start engine only where exhaust fumes w ill be safely dissipated. Allow a brief w arm-up period, and practice operation of controls outside before putting the machine to w ork. 8. After striking a foreign object, STOP the engine (motor), remove the key , and remove the wire from spark plug.
4 IMPORTANT SAFETY INSTRUCTIONS MAINTENANCE AND STORAGE 1. DO NOT store machine or fuel container inside where fumes may reach an open flame, spark, or pilot light as in a w ater heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure.
5 TABLE OF CONTENTS SECTION 1 - IMPORTANT SA FETY INSTRUCT IONS .......................... 2-4 TABLE OF CO NTENTS ............................................................................. 5 SECTION 2 - OPERATIN G INSTRUCTIO NS ....................
6 Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check guards, chutes, deflectors and covers to make sure all are in place and securely tightened. 2.1.
7 Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST (Continued from Previous Page) Make the following checks and perform the service required before each start-up. WARNING DO NOT use an electrical extension cord that is damaged. A damaged electrical extension cord could cause a shock or fire.
8 Section 2 - OPERATING INSTRUCTIONS 2.2 STARTING, STOPPING & OPERATION (RECOIL START MODELS) 2.2.1. ENGINE & AU G ER 1. Move choke control to the choke “O N” position. See Figure 2.5. NOTE: Stop the auger by releas ing the auger control. Stop the engine by turning the key switch to the “OFF” position.
9 Section 2 - OPERATING INSTRUCTIONS 2.2.4. ST OP PIN G Stop the auger by releas ing the auger control. Stop the engine by turning the key switch to the “OFF” position. Always remove key from key switch before leaving machine unattended. See Figure 2.
10 Section 2 - OPERATING INSTRUCTIONS WARNING Objects can be throw n by the snow throw er w hile it is in operation. Throw n objects could cause serious injury to the operator or by standers. Always w ear safety goggles or other suitable ey e protection.
11 Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the snow thrower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. Fo r the correct part or information for a particular snow thrower, always mention model and serial number.
12 Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any adjustments, maintenance, service, or repairs with engine running. Stop auger. Stop engine. Remove key. Remov e spark plug w ire and secure w ire aw ay from spark plug. 4.1 AUGER BELT ADJUSTMENT/REPLACEMENT When operating machine release the auger clutch control.
13 Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any adjustments, maintenance, service, or repairs with engine running. Stop auger. Stop engine. Remove key. Remov e spark plug w ire and secure w ire aw ay from spark plug. 4.1.2. AUGER BELT IDLER PULLEY ADJUSTMENT (Continued From Previous Page) 3.
14 Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any adjustments, maintenance, service, or repairs with engine running. Stop auger. Stop engine. Remove key. Remov e spark plug w ire and secure w ire aw ay from spark plug. 4.1.3. AUGER BELT REPLACEMENT (Continued From Previous Page) 5.
15 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not Start 1. Fuel tank empty. 1. Fill f uel tank w ith fresh fuel/oil mix. Using Recoil Starter 2. Engine needs choking & priming. 2. Mo ve choke control to “CHOKE” position.
16 2 YEAR LIMITED WARRANTY For two (2) years from purchase date for the orig inal purchaser's residential, non-commercial use, SNAPPER , through any authorized SNAPPER dealer will replace, free o.
17 SNAPPER PRODUCT REGISTRATION FORM IMPORTANT: KEEP THIS INFORMATION FOR YOUR PERSONAL RECORDS (Complete the following information on your Snapper purchase) Model Number _____________________________.
18 Safety Instructions & Operator’s Manual for L.E. SINGLE STAGE SMALL FRAME SNOW THROWER SERIES 1 IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contai n very important emissions information and critical safety warnings.
An important point after buying a device Snapper LE3171R, LE3191R, LE3191E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper LE3171R, LE3191R, LE3191E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper LE3171R, LE3191R, LE3191E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper LE3171R, LE3191R, LE3191E you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper LE3171R, LE3191R, LE3191E will certainly help you make a decision on the purchase.
If you already are a holder of Snapper LE3171R, LE3191R, LE3191E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper LE3171R, LE3191R, LE3191E.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper LE3171R, LE3191R, LE3191E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper LE3171R, LE3191R, LE3191E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
