Instruction/ maintenance manual of the product Lawn Mower Snapper
Go to page of 8
1 SET-UP INSTRUCTION & PRE-OPERATION CHECKLIST SNAPPER 21" STEEL DECK COMMERCIAL RECYCLING WALK MOWERS INTRODUCTION: The SNAPPER Walk Behind Mow ers are shipped almost fully assembled and require minimal set-up. Complete each of the follow ing steps carefully.
2 STEP 4: To adjust handle height loosen bolts on both lower handle brackets. See Figure 4. Move handles up or down for desired height. See Figure 5. Tighten all bolts and nuts on all handles and brackets. FIGURE 5 STEP 5: Install handle braces between lower handles and drive disc bracket on back of mower deck.
3 DRIVE ASSEMBLY STEP 1: 1. Remove driven disc spring from driven disc assembly as shown. See Figure 9. FIGURE 9 2. Manually adjust driven disc to position shown in Figure 10. FIGURE 10 3. Slide Ground speed control lever fully forward. See Figure 11.
4 STEP 2: IMPORTANT: Clutch cable adjustments are made to the machine at the facto ry. The follow ing adjustments are provided for reference only. Complete all items on the Pre-Operation Checklist as instructed. Check the clearance between the clutch cable and clutch spring.
5 DISCHARGE ASSEMBLY NOTE: Discharge assemblies vary by model. Some assembly steps show n may not apply to your model. Your mow er comes w ith a recycling cov er already installed, and is ready for use as a recycling mower.
6 3: Install the top wire to the grass bag. Tie the slider to the top wire. Fold bag opening into a "Z" and install slider. See Figure 17. FIGURE 17 4: Install grass bag on the mower as shown in Figure 18. FIGURE 18 WARNING DO NOT operate w ithout entire Grass Catcher or guard in place.
7 NOTES.
8 PRE-OPERATION CHECKLIST for SNAPPER 21” STEEL DECK COMMERCIAL RECYCLING WALK MOWERS Snapper has completed initial adjustments and performe d operational tests prior to shipping the machine.
An important point after buying a device Snapper Lawn Mower (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper Lawn Mower yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper Lawn Mower - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper Lawn Mower you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper Lawn Mower will certainly help you make a decision on the purchase.
If you already are a holder of Snapper Lawn Mower, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper Lawn Mower.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper Lawn Mower. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper Lawn Mower along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
