Instruction/ maintenance manual of the product HD4686 Snapper
Go to page of 4
1 SET-UP INSTRUCTIONS & PRE-OPERATION CHECKLIST for SNAPPER SCRAMBLERS The follow ing instructions cover the set-up of SNAPPER SCRAMBLERs. Complete each of the following steps carefully. Revi ew and complete each item as instructed on the Pre-Operation checklist.
2 3. BATTERY INSTALLATION (Continued from Previous Page) E. Connect over flow tube and route as shown in Figure 2. FIGURE 2 DISCHARGE DEFLECTOR A. The discharge deflector on 33”, 42” & 48” Models are shipped in the “UP” position.
3 TRACKING ADJUSTMENTS (SZT UNITS ONLY) When both motion control levers are fully engaged in forward drive, the machine should move in a straight line. If the machine tracks (veers) left or right, a tracking adjustment must be made. Each motion control lever is equipped with a tracking adjustment plate.
4 PRE-OPERATION CHECKLIST Snapper has completed initial adjustments and performe d operational tests prior to shipping the machine. Due to the possible effects of shipping, handling and storage, Snapper intends for all of the following items to be verified and necessary final adjustments made at time of setup.
An important point after buying a device Snapper HD4686 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper HD4686 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper HD4686 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper HD4686 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper HD4686 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper HD4686, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper HD4686.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper HD4686. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper HD4686 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
