Instruction/ maintenance manual of the product 38210XX1 Axor
Go to page of 8
Axor Uno 38020XX1 Axor Uno 38210XX1 Axor Uno 38025XX1 Installation Instructions / W arranty.
2 Installation Considerations For best results, Hansgrohe recommends that this unit be installed by a licensed, profes- sional plumber . Please read over these instruc- tions thoroughly before begin- ning installation. Make sure that you have all tools and supplies needed to complete the instal- lation.
3 Installation Place the faucet and sealing ring on the mounting surface. Install the friction washer , metal washer , and mounting nut. T ighten the mounting nut by hand. Check the position of the faucet. When satisfied, use a slot-headed screwdriver to tighten the tensioning screws.
4 Set the high temperature limit stop (optional) Remove the screw cover , located on the back of the handle. Use a 4 mm allen wrench to loosen the screw .
5 Install the pop-up drain Attach the swivel connector to the end of the horizontal rod. Attach the swivel connector to the end of the pull rod. Position as desired and tighten with a small, flat bladed screwdriver . Remove the plunger assembly . Unscrew the drain outlet flange from the tee.
6 Replacement Parts 1 handle 38094XXX 1.1 screw cover 96762000 1.2 set screw 96029000 2 flange 96763XXX 3 nut 97209000 4 cartridge 96764000 5 seal 95008000 6 aerator 97370XXX 7 fixing set 13961000 8 p.
7 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com US - Installation Instructions • Part No. 90540404 • Revised 04/2009 THIS W ARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT P A Y FOR: A.
An important point after buying a device Axor 38210XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axor 38210XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axor 38210XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axor 38210XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Axor 38210XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Axor 38210XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axor 38210XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Axor 38210XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axor 38210XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
