Snapper Broadmoor 2600 Lawn Mower manual

Summary of contents each page of manual

Page 1

Parts Manual Rev. 04/2004 Broadmoor / 1600 / 2600 Series Lawn Tractors & Mower Decks TP 400-2529-02-BM-SMA Mf g . No. Descri p tion 1 6 HP Tractors 1694009 Broadmoor, 16HP Hydro (Kohler) 1694010 B.
Page 2

.
Page 3

Table Of Content s Torque Specification Chart ...... ............................ ......................... .......... Inside Back Cover PRODUCT COMPONENTS PAGES Frame & Front Axle Gr oup ...........................................................
Page 4

Frame & Front Axle Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torq ue to 150 ft. lbs. (202 Nm) Torque to 22-4 0 ft. lbs. (30-5 4 Nm) Torque to 13 f t. lbs. Servic e Ki t 168 6985 Torque to 50-5 7 ft. lbs.
Page 5

PART NO. DESCRIP TION REF NO QTY. Frame & Front Axle Group Footnote s 1 1930645 7 NUT, Hex Flange Lock, 3/8-16 2 1960035 2 WASHER 3 960646 1 NUT, Hex Flange, 5/8-11 4 1722212 1 PLATE, Axle 5 17240.
Page 6

Frame & Front Axle Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torq ue to 150 ft. lbs. (202 Nm) Torque to 22-4 0 ft. lbs. (30-5 4 Nm) Torque to 13 f t. lbs. Servic e Ki t 168 6985 Torque to 50-5 7 ft. lbs.
Page 7

PART NO. DESCRIP TION REF NO QTY. Frame & Front Axle Group Footnote s 42 1919394 1 WASHER 43 932577 1 RETAINING RING The above parts group applies to the following Mfg.
Page 8

Steering Group - Manual Steering NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 36-44 ft. lbs. or 48-60 Nm Steering cap snaps over steering wheel. Use washers as required. Torque to 36-44 ft. lbs. or 48-60 Nm Bearin g mounts be low frame.
Page 9

PART NO. DESCRIP TION REF NO QTY. Steering Group - Manual Steering Footnote s 1 1722318 1 STEERING WHEEL, Straight, Shaft 2 1722319 1 CAP, Steering Wheel, SMI Logo 2 1725024 1 CAP, Steering Wheel, Pla.
Page 10

Engine & Electric Clutch Group - 16HP & 18HP B riggs & Stratton, Vanguard NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Manufactur er Ga sket & Ha rdw are, Torque to 18 ft. l bs. (25 N m) Tie clutch wir e to keep away from pu lley.
Page 11

PART NO. DESCRIP TION REF NO QTY. Engine & Electric Clutch Group - 16HP & 18HP B riggs & Stratton, Vanguard Footnote s 1 1723165 1 HOSE, Oil Drain, 10-1/2" Long, 3/8-18 Fittings 2 * 1.
Page 12

Engine & Electric Clutch Group - 16HP Briggs & Str atton, INTEK NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Manufactur er Gas k et & H ar dwa r e, Torque to 18 ft. l bs. (25 N m) Tie clutch wir e to keep away from pu lley.
Page 13

PART NO. DESCRIP TION REF NO QTY. Engine & Electric Clutch Group - 16HP Briggs & Str atton, INTEK Footnote s 1 1723165 1 HOSE, Oil Drain, 10-1/2" Long, 3/8-18 Fittings 2 * 1 ENGINE, 16HP .
Page 14

Engine & Electric Clutch Group - 16HP Honda NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 18 ft. l bs. (25 Nm) Tie clutc h wire to keep away from pulley. Torque to 45-5 0 ft . lbs . (61-68 Nm) Torque to 19-23 ft.
Page 15

PART NO. DESCRIP TION REF NO QTY. Engine & Electric Clutch Group - 16HP Honda Footnote s 1 934683 2 CLIP, Wire 1/8 2 960656 2 CAPSCREW, Hex Head, M06-1 x 12MM 3 1723526 1 SHIELD, Manifold, RH 4 17.
Page 16

Engine & Electric Clutch Group - 16HP Kohler NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine M anufact urer Gaske t & Ha rdwar e, Torqu e to 18 ft . lbs . (25 Nm) Tie clutch wire to keep away from pulley.
Page 17

PART NO. DESCRIP TION REF NO QTY. Engine & Electric Clutch Group - 16HP Kohler Footnote s 1 1723165 1 HOSE, Oil Drain, 10 1/2 Lon g, 3/8-18 Fittings 2 * 1 ENGINE, 16HP Kohler, Single, Model CV460S.
Page 18

Transmission Group - Tuff Torq K-57 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Spring to be compressed to 2-1/2 inches with brak e locked .
Page 19

PART NO. DESCRIP TION REF NO QTY. Transmission Group - Tuff Torq K-57 Footnote s 1 1960676 2 SCREW, Pan Head Torx Taptite, 1/4-20 x 1-1/4, Black 2 1722345 1 PAD, Footrest, LH, without Differential Loc.
Page 20

Transmission Group - Tuff Torq K-62 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Spring to be compress ed to 2-1/2 inches w i th brake locked. Torque nut to 19 - 21 ft. lbs. (26 - 28 Nm) Torque nut to 28 - 33 ft.
Page 21

PART NO. DESCRIP TION REF NO QTY. Transmission Group - Tuff Torq K-62 Footnote s 1 1960678 2 CAPSCREW, Pan Head Trox Taptite, 1/4-20 x 1-1/4, Black 2 1722345 1 PAD, Footrest, LH, W/O Differential Lock.
Page 22

Transmi ssion SERVICE PA RTS - Tuff Torq K-57A NOTE: Unless noted otherwise, use the standard hardware torque specification chart. SEAL SIDE; O UTER THI CK BEARIN G RACE SHOULD C ONTACT PISTO NS.
Page 23

PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-57A Footnote s 1 1724316 1 RING, SNAP 2 1724315 1 LOCKWASHER 3 1724314 1 FAN 4 1724312 2 COLLAR, SPLINE 5 1718076 3 RING E1.
Page 24

Transmi ssion SERVICE PA RTS - Tuff Torq K-57A NOTE: Unless noted otherwise, use the standard hardware torque specification chart. SEAL SIDE; O UTER THI CK BEARIN G RACE SHOULD C ONTACT PISTO NS.
Page 25

PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-57A Footnote s 43 1724954 1 FILTER 44 1724947 1 SHAFT, REDUCTION 45 1724948 2 WASHER, 12 x 32 x 3.
Page 26

Transmi ssion SERVICE PA RTS - Tuff Torq K-57A NOTE: Unless noted otherwise, use the standard hardware torque specification chart. SEAL SIDE; O UTER THI CK BEARIN G RACE SHOULD C ONTACT PISTO NS.
Page 27

PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-57A Footnote s 85 1708691 2 PACKING 86 1724281 1 SHAFT, BYPASS The above parts group applies to the following Mfg. Nos.: 2004 27 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
Page 28

Transmi ssion SERVICE PA RTS - Tuff Torq K-62K NOTE: Unless noted otherwise, use the standard hardware torque specification chart. THI CKE R PLATE THI CKE R PLATE 11 77 15 19 12 14 16 13 30 22 29 88 2.
Page 29

PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-62K Footnote s 1 1718100 2 PIN 6.0A x 4.0 2 1724705 1 PIN 3 1724706 1 LEVER, CONTROL 4 1718039 1 SHOCK ABSORBER 5 1724704 1.
Page 30

Transmi ssion SERVICE PA RTS - Tuff Torq K-62K NOTE: Unless noted otherwise, use the standard hardware torque specification chart. THI CKE R PLATE THI CKE R PLATE 11 77 15 19 12 14 16 13 30 22 29 88 2.
Page 31

PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-62K Footnote s 43 1724752 1 GEAR, MOTOR 44 1724751 1 E, RING MOTOR 45 1724723 1 DISC, BRAKE 46 1724725 1 SHIM SET 47 1724724 1 SHOE, BRAKE 48 1724726 1 ACTUATOR, BRAKE 49 1724714 1 SHAFT, FINAL PINION 50 1724715 2 WASHER, 15 x 32 x 3.
Page 32

Transmi ssion SERVICE PA RTS - Tuff Torq K-62K NOTE: Unless noted otherwise, use the standard hardware torque specification chart. THI CKE R PLATE THI CKE R PLATE 11 77 15 19 12 14 16 13 30 22 29 88 2.
Page 33

PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-62K Footnote s 85 1724727 1 SHAFT, BRAKE HL #10 86 1724728 1 WASHER, 16 x 23 x 1.6 87 1708690 1 PACKING 88 1724722 1 SPRING, BRAKE 89 1724721 1 ARM, BRAKE The above parts group applies to the following Mfg.
Page 34

Lift Group - Manual Lift NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Ref. No. 1 6 Instal l int o lef t hand side of lower dash. 2 16 15 12 11 13 17 7 5 9 8 4 6 3 10 18 19 12 20 21 1 14 2 12 985893 The above parts group applies to the following Mfg.
Page 35

PART NO. DESCRIP TION REF NO QTY. Lift Group - Manual Lift Footnote s 1 1722285 1 COVER, Dash 2 1924940 2 WASHER 3 1721789 1 ROD 4 1722024 1 ROD, Lift 5 1722302 1 GRIP, Black Vinyl 6 1923341 2 CAPSCRE.
Page 36

Lift Group - Manual Lift NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Install into left ha nd side of lower da sh. 4 5 3 6 1 9 2 8 10 13 14 11 18 17 16 5 12 5 7 15 986412 The above parts group applies to the following Mfg.
Page 37

PART NO. DESCRIP TION REF NO QTY. Lift Group - Manual Lift Footnote s 1 1722302 1 GRIP, Black Vinyl 2 1722024 1 ROD, Lift Lever with Flats 3 1930645 1 NUT, Hex Flange Lock, 3/8-16 4 1924940 1 WASHER 5.
Page 38

Controls Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 17 19 12 18 14 13 20 21 27 29 22 28 23 25 4 30 31 37 35 30 32 38 34 36 33 1 5 9 2 8 4 6 3 10 1 5 6 10 15 16 24 24 26 15 35 41 40 39 18 7 8 985882 The above parts group applies to the following Mfg.
Page 39

PART NO. DESCRIP TION REF NO QTY. Controls Group Footnote s 1 1721353 1 ROD, Brake Lock 2 1721891 1 KNOB, Push On, Red Plastic "P" 3 1930591 1 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4 4.
Page 40

Cruise Control Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Control Ar m from tr ansmission group. Brake ar m at idle r pivot. Hol e "A" Hook into hole "A" of frame. Instal l rounded edge of washer toward lever & bracket ass embly.
Page 41

PART NO. DESCRIP TION REF NO QTY. Cruise Control Group Footnote s 1 1723713 1 DECAL, Cruise & Lift 2 1960666 1 SCREW, Torque Head Plus Socket Head, 1/4-20 x 7/8 3 1722303 1 KNOB, Cruise 4 1920397 .
Page 42

Electrical Group - Honda Engine NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Cru is e Sw itch (See Controls Group for Mounting Hardware) To Engine Sta rter Headl.
Page 43

PART NO. DESCRIP TION REF NO QTY. Electrical Group - Honda Engine Footnote s 1 1721810 1 HEADLIGHT ASSEMBLY, 4 Blub, (Incudes Ref. Nos. 2 & 3) 2 1677371 4 BULB, Headlight, 12.
Page 44

Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Engine St arte r Headlight Switc h DASH MOUNTED HOOD MOU NTE D UNDER HOO D UNDER HOOD UNDER S EA.
Page 45

PART NO. DESCRIP TION REF NO QTY. Electrical Group Footnote s 1 1721810 1 HEADLIGHT ASSEMBLY, 4 Bulb, (Includes Ref. Nos. 2 & 3) 2 1677371 4 BULB, Headlight, 12.
Page 46

Hood, Grill & Dash Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Secure to bo ttom LH soleno id mounting ho le. 9 14 10 11 13 8 1 4 7 6 3 5 2 8 3 3 12 985896 The above parts group applies to the following Mfg.
Page 47

PART NO. DESCRIP TION REF NO QTY. Hood, Grill & Dash Group Footnote s 1 1721804 1 PANEL, RH Side, Orange 1 41721804 1 PANEL, RH Side, Red 2 1721801 1 HOOD, Orange 2 41721801 1 HOOD, Red 3 1960295 .
Page 48

Seat & Seat Deck Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 14-19 in. lbs. (19 - 25.8 Nm) Torque to 25-30 in.
Page 49

PART NO. DESCRIP TION REF NO QTY. Seat & Seat Deck Group Footnote s 1 1722129 1 BRACKET, 1-5/8 x 1-3/4 2 1722307 1 * SEAT, 18" Back, Optional 2 1722306 1 * SEAT, 15" Back, Standard 3 172.
Page 50

Wheels & Tires Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Fron t Wheels Rear Wh eels Use as requi red. Use as req uired . 11 4 4 9 2 10 3 5 8 12 10 7 1 14 15 16 17 6 13 8, 18 7, 20 19 6 W985913 The above parts group applies to the following Mfg.
Page 51

PART NO. DESCRIP TION REF NO QTY. Wheels & Tires Group Footnote s 1 1722065 2 WHEEL & TIRE ASSEMBLY, Front, (Includes Ref. Nos. 2, 3, 4, 5, & 6) 2 1722838 1 TIRE, 15 x 6, Super Turf 3 1664090 1 TUBE, Tire, Front, 4.
Page 52

Decals - Brand & Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 7 1 2 2 3 4 5 6 8 9 11 10 4 12 B985913 The above parts group applies to the following Mfg. Nos.: 2004 52 © Copyright Simplicity Manufacturing, Inc.
Page 53

PART NO. DESCRIP TION REF NO QTY. Decals - Brand & Model Footnote s 1 1717692 1 DECAL, ICON Simplicity, Orange 2 1722551 3 DECAL, Simplicity, Silver & Blue w/Icon 3 1722776 1 DECAL, Broadmoor,.
Page 54

Decals - Safe ty & Co mmon NOTE: Unless noted otherwise, use the standard hardware torque specification chart. DA NG E R OPERATING O N SLOPES CAN BE DANGER OUS SEE OPERATOR 'S MANUAL. IF YOU CAN NOT BACK -UP A HILL, DO NOT DRIV E ON IT. ROTATING BLADES CUT OFF ARMS AND LEGS STOP MOWER WHEN CHILDRE N ARE NEAR.
Page 55

PART NO. DESCRIP TION REF NO QTY. Decals - Safe ty & Co mmon Footnote s 1 1722806 1 DECAL, Ignition Switch Symbols, White/Black 2 1718025 1 DECAL, Automatic Control Traction 3 1722549 1 DECAL, 16H.
Page 56

38" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out M oun t H i tc h A ss em b l y an d Leveli ng Adju stment R od using upper set of ho les Hook Spring to Belt Guide Hook Spring {Ref 22 } here when assembled.
Page 57

PART NO. DESCRIP TION REF NO QTY. 38" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1723025 1 V-BELT 2 1928957 2 CAPSCREW, Hex Head, 3/8-16 x 2-3/4 3 1677135 1 GUARD, Belt 4 1922755 4 WASHER, Plain, 3/8 5 1716553 1 SPACER 6 1685150 1 PULLEY (Includes Ref.
Page 58

38" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. GREASE Insert Must Face Out Insert Must Face Out GREASE Ins.
Page 59

PART NO. DESCRIP TION REF NO QTY. 38" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1930644 2 NUT, Hex Flange Lock, 1/2-13 2 1686686 1 SHAFT & BAR ASSEMBLY (Includes Ref.
Page 60

38" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. GREASE Insert Must Face Out Insert Must Face Out GREASE Ins.
Page 61

PART NO. DESCRIP TION REF NO QTY. 38" Mower Deck - Height Adjustment & Roller Bar Footnote s 43 1704115 1 PLATE, Support 44 1922606 1 CAPSCREW, Hex Head, 3/8-16 x 1-3/4 45 1704093 1 ROD, Adjustment 46 1706644 1 SPACER 47 1722036 2 ROLLER The above parts group applies to the following Mfg.
Page 62

38" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Viewed From Bottom Torque to 50-70 ft. lbs. Torque to 45-55 ft. lbs. Apply gasket former to this surface if foam gasket is not used.
Page 63

PART NO. DESCRIP TION REF NO QTY. 38" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1705449 1 DEFLECTOR, Plastic 2 1960518 1 NUT, Push 3 1960353 2 WASHER, Plain 4 1704873 1 CLAMP 5 1916.
Page 64

40" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Slot "A" To Slot "B" Slot " B" S.
Page 65

PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1919439 2 NUT, Hex Lock Esna Light, 3/8-16 2 1924940 5 WASHER, 3/8 3 1725408 1 PULLEY, Idler, 4" O.
Page 66

40" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Slot "A" To Slot "B" Slot "B" Sl.
Page 67

PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1919439 1 NUT, Hex Lock Esna Light, 3/8-16 2 1924940 6 WASHER, 3/8 3 1725408 1 PULLEY, Idler 4 1723391.
Page 68

40" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Apply Locktite 380 in hole prior to assemb ly.
Page 69

PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1722661 1 ROD 2 1924940 5 WASHER, 3/8 3 1922606 1 CAPSCREW, Hex Head, 3/8-16 x 1 3/4 4 1917421 1.
Page 70

40" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Apply Locktite 380 in hole prior to assemb ly.
Page 71

PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Height Adjustment & Roller Bar Footnote s 43 1933988 4 NUT, Push, 5/16 44 1665374 3 STRAP, Roller Support 45 1720919 1 DECAL, Height of Cut .
Page 72

40" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 50-70 ft.
Page 73

PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1931318 1 CARRIAGE BOLT, 1/4-20 x 7/8 2 1960518 1 NUT, Push 3 1960353 2 WASHER, 1/4 4 1704873 1 CLAMP.
Page 74

40" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Tor que to 4 5-55 ft .
Page 75

PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1930584 1 CAPSCREW, Hex Head, 7/16-14 x 2-3/4 G8 2 1933263 1 WASHER, 7/16 3 1656916 4 WASHER, Spring .
Page 76

44" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Pulley Movable Idler Pulley Arbor Drive Pulley Arbor Drive.
Page 77

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1601672 1 V-BELT, Mower Drive 2 1721532 1 V-BELT, Arbor Drive 3 1665835 1 GRIP, Lever 4 1916950 2 NUT,.
Page 78

44" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Insert Must Face Out GREASE Feet tow a.
Page 79

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1685443 1 SHAFT & BAR ASSEMBLY, 44" (Includes Ref.
Page 80

44" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Insert Must Face Out GREASE Feet tow a.
Page 81

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Height Adjustment & Roller Bar Footnote s 43 1704083 1 ARM, Rear, Mower, RH 44 1921977 2 CAPSCREW, Hex Head, 5/16-18 x 1-1/4 45 1704087 1 TR.
Page 82

44" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque screws to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used.
Page 83

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1714419 3 NUT, Hex Flange, 9/16-18 2 1713675 6 WASHER, Bellevilled, 9/16 3 1713161 1 PULLEY, 4-1/2 O.D. 4 1713158 1 HUB, Double Pulley 5 1713098 3 PULLEY, 4-1/4 O.
Page 84

44" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque screws to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used.
Page 85

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades Footnote s 42 1927557 2 NUT, Hex Flagne Whiz Lock, 5/16-18 43 1724538 1 BAFFLE, Blowout, 44" & 50" The above parts group applies to the following Mfg. Nos.
Page 86

44" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 5 0-70 ft. lb s. (67-95 Nm.) Torque sc rews to 45-55 ft. lb s. (61- 75 Nm) Apply gaske t former to this s urface if foam ga sket is no t used .
Page 87

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1714419 3 NUT, Hex Flange, 9/16-18 2 1713675 6 WASHER, Bellevilled, 9/16 3 1713161 1 PULLEY 4 1713158.
Page 88

44" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 5 0-70 ft. lb s. (67-95 Nm.) Torque sc rews to 45-55 ft. lb s. (61- 75 Nm) Apply gaske t former to this s urface if foam ga sket is no t used .
Page 89

PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades Footnote s 42 1931333 8 CARRIAGE BOLT, 5/16-18 x 3/4, Black (CE Only) 43 1927557 8 NUT, Hex Flange Whiz Lock, 5/16-18, Black (CE Only) 44 1716878 1 BAFFLE, Anti-Blowout, RH (CE Only) The above parts group applies to the following Mfg.
Page 90

50" Mower Deck - Cl ut ch & Support NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Pul ley Movable Idler Pul le y Arbor Drive Pul ley Arbor Drive P.
Page 91

PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Cl ut ch & Support Footnote s 1 1707740 1 V-BELT, Mower Drive 2 1703836 1 V-BELT, Arbor Drive 3 1665835 1 GRIP, Lever 4 1916950 2 NUT, Hex, .
Page 92

50" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Mount Hitch Assembly and • Leveling .
Page 93

PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1719901 1 CRANK, Cutting Height 2 1714084 1 KNOB, Height Crank 3 1960093 1 PAL NUT 4 1924366 8 W.
Page 94

50" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Mount Hitch Assembly and • Leveling .
Page 95

PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Height Adjustment & Roller Bar Footnote s 43 1917372 2 NUT, Hex, 5/16-18 44 1917356 2 WASHER, Lock, 5/16 45 1704116 1 BRACKET, Cutting Heigh.
Page 96

50" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque s crews to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used.
Page 97

PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1714419 3 NUT, Hex Flange, 9/16-18 2 1713675 6 WASHER, Bellevilled, 9/16 3 1713161 1 PULLEY 4 1713158.
Page 98

50" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque s crews to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used.
Page 99

PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Housin g, Arbors & Blades Footnote s 42 1713197 2 HUB, Pulley, Center & RH 43 1724538 1 BAFFLE, Anti-Blowout 44 1927557 2 NUT, Hex, Whizlock, 5 /16-18 45 1931333 2 CARRIAGE BOLT, 5/16-18 x 3/4 The above parts group applies to the following Mfg.
Page 100

.
Page 101

T or que Specification Char t FOR ST ANDARD MACHINE HARDWARE (T olerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.
Page 102

500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.simplicitymfg.c om MANUFACTURING, INC. © Copyright Simplicity Manufacturing, Inc.

Read the Snapper Broadmoor 2600 manual - avoid problems

An important point after buying a device Snapper Broadmoor 2600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:

to know how to properly use the device
to know how to perform maintenance/ periodic checks of correct operation of the product Snapper Broadmoor 2600
to know what to do in case of failure Snapper Broadmoor 2600

If you have not bought Snapper Broadmoor 2600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper Broadmoor 2600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper Broadmoor 2600 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper Broadmoor 2600 will certainly help you make a decision on the purchase.

If you already are a holder of Snapper Broadmoor 2600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper Broadmoor 2600.

However, one of the most important roles played by the user manual is to help in solving problems with Snapper Broadmoor 2600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper Broadmoor 2600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center

Snapper Broadmoor 2600 manual

Share URL

Similar manuals

Share URL

Similar manuals

Summary of contents each page of manual

Page 1

Page 2

Page 3

Page 4

Page 5

Page 6

Page 7

Page 8

Page 9

Page 10

Page 11

Page 12

Page 13

Page 14

Page 15

Page 16

Page 17

Page 18

Page 19

Page 20

Page 21

Page 22

Page 23

Page 24

Page 25

Page 26

Page 27

Page 28

Page 29

Page 30

Page 31

Page 32

Page 33

Page 34

Page 35

Page 36

Page 37

Page 38

Page 39

Page 40

Page 41

Page 42

Page 43

Page 44

Page 45

Page 46

Page 47

Page 48

Page 49

Page 50

Page 51

Page 52

Page 53

Page 54

Page 55

Page 56

Page 57

Page 58

Page 59

Page 60

Page 61

Page 62

Page 63

Page 64

Page 65

Page 66

Page 67

Page 68

Page 69

Page 70

Page 71

Page 72

Page 73

Page 74