Instruction/ maintenance manual of the product 7-5122 Snapper
Go to page of 4
1 SET-UP INSTRUCTIONS & PR E-OPERA TION CHECKLIST For SNA PPER “W” SERIES REA R ENGINE RIDERS INTRODUCT ION: T he SNAP PER “W ” Series Rear Engine Riders are shipped fu lly assembled and require minimal set- up. Complete each of the follow ing steps caref ully.
2 DISCHA RGE DEFLECTOR The dis charge deflect or is shipped in the “UP” position. Remove rubber band, lower dis charge deflect or and secure to deck with carr iage bolt(s), flat washer( s) and wing nut(s) fur nished in the deck .
3 SERVICE NOTES ______________________________________________________________________________ ______________________________________________________________________________ __________________________.
4 PRE-OPERA TION CHECKLIST Snapper has completed initial adjustments and performed oper ational tests prior to shipping the ma chine. Due to the possible e ffects of shipping, handling and storage, Snapper intends for all of the following items to be verified and necessary final adjustme nts made at time of setup.
An important point after buying a device Snapper 7-5122 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper 7-5122 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper 7-5122 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper 7-5122 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper 7-5122 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper 7-5122, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper 7-5122.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper 7-5122. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper 7-5122 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
