Instruction/ maintenance manual of the product 7-4375 Snapper
Go to page of 4
1 DEA LER SET-UP INSTRUCTIONS & PRE-SALE CHECKLIST for EUROPEA N SNA PPER LT SERIES TRA CTORS INTRODUCT ION: Snapper LT (O ne Piece Frame) Tract ors are shipped with th e steering w heel and seat cushions removed. The followin g steps are required f or set-up.
2 4. W ith c ell caps rem oved, connect battery charger to battery terminals ; RED to positive (+) and BLACK to negative (-) terminal. 5. If time allows, slow charge at 1 am p for 10 hours, or as an alternative, f ast charge at not m ore than 2.5 amps for 4 hours to bring the battery to full charge.
3 FIGURE 4 FIGURE 5 Step 7: CHECK I NTERLOCK SYSTEM The interloc k system includes a seat switch, a clutch switch and a m ower blade (PTO) switch. The system functions in the following way : A. ENGINE MUST NOT START IF: 1. The blade lever is in the ON position.
4 DEA LER PRE-SA LE CHECKLIST The f ollo w in g mu st b e accomplish ed p rior sale. Refer t o p ages 1 - 3 for detailed set-up instructio ns. Review this list wit h purchaser. Check ( ✓ ) items actually perfor med and signed on this page. CUTTING BLA DE & M OWER _____ BLADE RET AINING hardware check ed for proper tightness.
An important point after buying a device Snapper 7-4375 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper 7-4375 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper 7-4375 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper 7-4375 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper 7-4375 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper 7-4375, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper 7-4375.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper 7-4375. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper 7-4375 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
