Instruction/ maintenance manual of the product Aspire X3810 Acer
Go to page of 110
Acer Aspire X3810/X5810 Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.
ii Revision History Please refer to the table below for the updates ma de on this service guide. Date Chapter Up dates.
iii Copyright Copyright © 2009 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into a n.
iv Disclaimer The information in this guide is subject to ch ange without notice. Acer Incorporated makes no representations or warranties, either e xpressed or implied, w ith respect to th e contents hereof and specifically disclaims any warrantie s of merchantability or fitness for a ny particular purpose.
v Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appear on screen. NOTE Gives additional informa ti on rela ted to the current topic. W ARNING Alerts you to any physical risk or system damage that might result from doing or not doing specific actions.
vi Service Guide Coverage This Service Guide provides you with all technica l information relating to the BASIC CONFIGURA TION decided for Acer's "glo bal" product offering.
vii System Tour 1 Features 1 System Compon e nt s 4 Front Panel 4 Rear Panel 6 Internal Components 7 System LED Indicat or s 8 System Utilities 9 CMOS Setup Utility 9 Entering CMOS setup 10 Navigating.
viii System Configuration 65 CMOS 66 Miscellaneous 66 USB eModule Error Messages 67 SMBIOS eModule Error Messages 67 CPU eModule Error Messages 67 MPS Table (Multi-proce ssor) eModule Error Messages 6.
Chapter 1 1 Features Below is a brief summary of the computer ’s many feature: NOTE: The features listed in this section is for your re ference only .
2 Chapter 1 PCI I/O One PCI Express x16 bus slot One PCI Express x1 bus slot I/O ports Front Three USB 2.0 port s Memory S tick Memory S tick PRO Secure Digital (SD) Card .
Chapter 1 3 Dimension and weight Dimension (DxWxH): 265 x 100 x 362 mm (with bezel) Weight (estimate): 5.6 kg (MVB SKU).
4 Chapter 1 System Components This section is a virtual tour of th e sy stem’s interior and exterior components. Front Panel X3810 No. Icon Component 1 HDD activity indicator 2 Optical drive bay door 3 Drive bay door eject button Press to open drive bay door and access the optical drive.
Chapter 1 5 X5810 No. Icon Component 1 Power button/power indicator 2 Optical drive bay door 3 Front I/O cover open/close icon Press beneath the icon (on the co ver) to open th e front I/O cover . T o close the door , flip the cover back into place, then press the cover , beneath the icon.
6 Chapter 1 Rear Panel No. Icon Component 1 Expansion slot (Photo shows graphics card and TV tuner card) 2 Line-out jack 3 Microphone/speaker-out/line-in jack 4S / P D I F p o r t 5e S A T A p o r t 6 USB 2.
Chapter 1 7 Internal Components No. Compon ent 1 HDD drive 2 Optical drive 3 Expansion cards 4 Mainboard 5 Heat sink fan assembly 6 Power supply.
8 Chapter 1 System LED Indicators This section describ es the different system LED indicators. LED indicator Color LED status Description Power Green On The system has AC power and is powered on. Green Blinking The system is in standby mode. — Off System is not powered on.
Chapter 2 9 CMOS Setup Utility CMOS setup is a hardware configurat ion program built into the system ROM, called the complementary met al- oxide semiconductor (CMOS) Setup Utility . Since mo st systems are already prope rly configured and optimized, there is no need to run this util ity .
10 Chapter 2 Entering CMOS setup 1. T urn on the computer and the monitor . If the computer is already turned on, close all open applicatio ns, then restart the computer . 2. During POST , press Delete . If you fail to press Delete before POST is completed, you will need to re start the comp uter .
Chapter 2 11 Setup Utility Menus The Setup Main menu includes the following main setup categories. Product Information S tandard CMOS Features Advanced BIOS Features Advanced Chipset F.
12 Chapter 2 Product Information The Product Information menu disp lays basic information about the syst em. These entries are for your reference only and are not user-configurable. Parameter Description Processor T ype T ype of CPU installed on the system.
Chapter 2 13 Standard CMOS Features Parameter Description Option System Date Set the date following the weekday-month-day-year format. System T ime Set the system time following the hour-minute-secon d format. AHCI Port 0/1/2/3 Displays the status of auto detection of the AHCI device.
14 Chapter 2 Advanced BIOS Features Parameter Description Option Quick Boot Allows you to decrease the time it takes to boot the computer by shortening or skipping certain st andard booting process. Enabled Disabled Quiet Boot When enabled, the BIOS splash screen displays during startup.
Chapter 2 15 Advanced Chipset Features Parameter Description Option Intel EIST When enabled, this feature allows the OS to r educe power consumption. When disabled, the system operates at maximum CPU speed.
16 Chapter 2 Integrated Peripherals Parameter Description Option Onboard SA T A Mode Select an operating mode for the onboard SA T A. AHCI Native IDE USB Functions Enables or di sables USB functionality . 12 USB Port s Legacy USB Support Enables or disables support for legacy USB devices.
Chapter 2 17 Power Management Setup Parameter Description Option ACPI Aware O/S Enables or disables the Advanced Configuration and Power Management (ACPI) function. Enabled Disabled ACPI Suspend Mode Select an ACPI state. S3 (STR) S1 (POS) Power On by RTC Alarm Enables or disables real time clock (RTC) to generate a wake event.
18 Chapter 2 PC Health Status Parameter Description Option Smart F AN Enables or disables the smart system fan control function. Enabled Disabled.
Chapter 2 19 Frequency/Voltage Control Parameter Description Option S pread Spectrum Clock Enables or disabl es the reduction of the mainboard’s EMI. Note: Remember to disable the Spread S pectrum feature if you are overclocking. A slight jitter can introduce a temporary boost in clock speed causing the overclock ed processor to lock up.
20 Chapter 2 Processor Configuration Parameter Description Option Hardware Prefetcher Enables or disables the speculative unit wi thin the processor. Enabled Disabled Adjacent Cache Line Prefetch When Enabled, cache lines are fetc hed in pairs (even line + odd line).
Chapter 2 21 DRAM Configuration Parameter Description Option Memory Hole Remapping Enables or disables remapping of memory . Enabled Disabled DRAM Frequency Sets the memory frequency . Auto 533 MHz 667 MHz 800 MHz 1067 MHz 1333 MHz Configure DRAM Timing by SPD Enables or disables DRAM timing control.
22 Chapter 2 Bus Configuration Parameter Description Option USB Functions Set the USB functionality . Disabled 2, 4, 6, 8, 10 or 12 USB ports USB Port Configure Onboard LAN Controller Enables or si ables the onboard ne twork controller .
Chapter 2 23 GPI09 Configuration Set the GPIO9 function. WOL Enabled High Low HDA Controller Enables or di sables the HDA controller . Enabled Disabled SMBUS Controller Enables or di sables the SMBUS controller . Enabled Disabled SLP_S4# Min. Assertion Width Set the SLP_S4 minimum assert time.
24 Chapter 2 BIOS Security Features Setting a syste m pass word 1. Use the up/down arrow keys to select a password parameter (Change Supervisor Password or Change User Password) menu then press Enter . A password box will appear . 2. T ype a password then press Enter .
Chapter 2 25 Removing a system password 1. Use the up/down arrow keys to select password parameter (Change Supervisor Password or Change User Password) menu then press Enter . 2. Enter the current p assword then press Enter . 3. Press Enter twice without entering anythin g in the password fields.
26 Chapter 2 Load Default Settings The Load Default Settings menu allo ws you to load the default settings for all BIOS setup parameters. Setup defaults are quite demanding in terms of resources cons umption.
Chapter 2 27 Save & Exit Setup The Save & Exit Setup me nu all ows you to save change s made and close the Setup Utility ..
28 Chapter 2 Exit Without Saving The Exit Without Saving menu allows you to discard changes made and close the Setup Utility ..
Chapter 2 29 BIOS Recovery AMIBIOS8 supports a "recovery flash" mode, which can be used to flash update a BIOS from the boot block. This is used to update a BIOS i mage without the need to boot to an o perating system. The following is the process that user should fol low to flash BIOS ROM.
30 Chapter 2.
Chapter 3 31 This chapter contains step-by-step procedure s on how to disassem ble the desktop computer for ma intenance and troubleshooting. Disassembly Requirements T o disassembl e the computer , y.
32 Chapter 3 Pre-disassembly Procedure Before proceeding with the disassembly proce dure, perform the steps listed below: 1. T urn off the system and all the peripherals conne cted to it. 2. Unplug the power cord from the power ou tlets. 3. Unplug the power cord from the system.
Chapter 3 33 Main Unit Disassembly Screw List Screw Part No. A #6-32 L5 BZN 86.00J07.B60 B M3xL5 BZN 86.1A324.5R0 C #6-32*3/16 NI 86.5A5B6.012 D #6-32 L6 NI 86.
34 Chapter 3 Removing the Side Panel 1. Perform the pre-disassembly pr ocedure descri bed on page 32. 2. Remove the two screws (A) located on the rear edge of the side panel. 3. Slide the side panel toward the back of the chassi s until the tabs on the cover disengage with the sl ots on the chassis.
Chapter 3 35 Removing the Front Bezel 1. Remove the side panel. Refer to the previous section for instructions. 2. Remove the front bezel. (1). Release the front bezel retention tabs from the chassi s in terior . (2). Detach the bezel slightly away from the chassis.
36 Chapter 3 Removing the Heat Sink Fan Assembly W ARNING: The heat sink becomes ve ry hot when the syste m is on. NEVER touch the heat sink with any metal or with your hands. 1. See “Removing the Side Panel” on page 34. 2. See “Removing the Front Bezel” on page 35.
Chapter 3 37 Removing the Processor IMPORT AN T : Before removing a processor from the mainboard, make sure to create a backup file of all import ant data. W ARNING: The processor becomes very hot when the system is on. Allow it to co ol off first before handling.
38 Chapter 3 Removing the Optical Drive 1. See “Removing the Side Panel” on page 34. 2. See “Removing the Front Bezel” on page 35. 3. See “Removing the Heat Sink Fan Assembly ” on page 36. 4. See “Removing the Processor” on page 37. 5.
Chapter 3 39 (3). Lift the HDD-ODD bracket and turn it over . (4). Disconnect the data and power cab les from the HDD. (5). Remove the HDD-ODD bracket.
40 Chapter 3 7. Remove the two screws (B) from the optical drive. 8. Slide the optical drive out of the drive bay . Screw (Quantity) Color To r q u e Part No.
Chapter 3 41 Removing the Hard Disk Drive 1. See “Removing the Side Panel” on page 34. 2. See “Removing the Front Bezel” on page 35. 3. See “Removing the Heat Sink Fan Assembly ” on page 36. 4. See “Removing the Processor” on page 37. 5.
42 Chapter 3 Removing the Power Supply 1. See “Removing the Side Panel” on page 34. 2. See “Removing the Front Bezel” on page 35. 3. See “Removing the Heat Sink Fan Assembly ” on page 36. 4. See “Removing the Processor” on page 37. 5. See “Removing the Optical Drive” on page 38.
Chapter 3 43 9. Remove the three screws (A) that secure the power supply to the rear panel. 10. Lift the power supply module out of the chassis. Screw (Quantity) Color To r q u e Part No.
44 Chapter 3 Removing the Memory Modules IMPORT AN T : Before removing any DIMM from the memory board, make sure to create a backup file of all import ant data. 1. See “Removing the Side Panel” on page 34. 2. See “Removing the Front Bezel” on page 35.
Chapter 3 45 Removing the TV Tuner Card 1. See “Removing the Side Panel” on page 34. 2. See “Removing the Front Bezel” on page 35. 3. See “Removing the Heat Sink Fan Assembly ” on page 36. 4. See “Removing the Processor” on page 37. 5.
46 Chapter 3 Removing the VGA Card 1. See “Removing the Side Panel” on page 34. 2. See “Removing the Front Bezel” on page 35. 3. See “Removing the Heat Sink Fan Assembly ” on page 36. 4. See “Removing the Processor” on page 37. 5. See “Removing the Optical Drive” on page 38.
Chapter 3 47 9. Disconnect the VGA card cable fro m the mainboard..
48 Chapter 3 Removing the Front I/O and Card Reader Boards 1. See “Removing the Side Panel” on page 34. 2. See “Removing the Front Bezel” on page 35. 3. See “Removing the Heat Sink Fan Assembly ” on page 36. 4. See “Removing the Processor” on page 37.
Chapter 3 49 (1). Remove the screw (D) that secure s the bracket to the chassis. (2). Remove the bracket. 11 . Remove the card read er board. (1). Remove the two screws (D) that secure the card reader board to the bracket. Screw (Quantity) Color To r q u e Part No.
50 Chapter 3 (2). Pull the card reader board out of the bracket. 12. Remove the front I/O board. (1). Remove the two screws (D) that secu re the I/O board to the bracket. (2). Pull the I/O board out of the bracket. Screw (Quantity) Color To r q u e Part No.
Chapter 3 51 Removing the Mainboard 1. See “Removing the Side Panel” on page 34. 2. See “Removing the Front Bezel” on page 35. 3. See “Removing the Heat Sink Fan Assembly ” on page 36. 4. See “Removing the Processor” on page 37. 5. See “Removing the Optical Drive” on page 38.
52 Chapter 3 13. Remove the screw (B) on the rear panel. 14. Lift the board from the chassis. Screw (Quantity) Color To r q u e Part No. M3xL5 (1) Black 5.
Chapter 4 53 This chapter provides instructions on how to troubleshoot system hardw are probl ems. Hardware Diagnostic Procedure IMPORT AN T : The d iagnostic tests described in this chapter ar e o nly intended to test Acer p roducts. Non-Acer products, prototype cards, or modified opti ons can give false errors an d inval id system responses.
54 Chapter 4 System Check Procedures Power System Check If the system will power on, skip this sect ion. Refer to System Extern al In spection. If the system will not power on, do the fol lowing: Check if the power cable is properly connected to the system and AC source.
Chapter 4 55 Checkpoints A checkpoint is either a byte or word value output to I/O port 80h. The BIOS outputs checkpoint s througho ut bootblock and Power-On Self T e st (POST) to indicate t he task the system is currently executing.
56 Chapter 4 Bootblock Recover y Code Checkpoints The Bootblock recovery code gets control when the BIOS determines that a BIOS recovery needs to occur because the user has forced the upda te or the BIOS checksum is corrupt . Refer to “BIOS Recovery” on page 29 for more information about perfo r mi ng a BIOS recovery .
Chapter 4 57 POST Code Checkpoints The POST code checkpoints are the largest set of checkpoints during the BIOS preboot process. The following table describes the type of checkpoints th at may occur during the PO ST po rtion of the BIOS. NOTE: Please note that checkpoi nts may dif fer between different plat forms based on system configuration.
58 Chapter 4 3A Initialize RTC date/time. 3B T est for total memory inst alled in the system. Also, Check for DEL or ESC keys to limit memory test. Display to tal memory in the sy stem. 3C Mid POST initiali zation of chipset registers. 40 Detect different devices (Parallel ports, serial ports, and coprocessor in CPU, .
Chapter 4 59 DIM Code Checkpoints The Device Initialization Manager (DIM) gets control at va rious times during BIO S POST to in it ia l i z e di f ferent system busses. The following table describes the ma in checkpo ints where the DIM module is accessed.
60 Chapter 4 Beep Codes Beep codes are used by the BIOS to indicate a seriou s or fatal error to the end user . Beep codes are used when an error occurs before the system video ha s b een initialized. Beep c odes will be generated by the system board speaker , commonly refe rred to as the PC speaker .
Chapter 4 61 T roubleshooting POST BIOS Beep Codes Number of Beeps Descrip tion 1,3 Reseat the memory , or replace with known good modul es. 6,7 Fatal error indicating a serious probl em with the system.
62 Chapter 4 Error Messages The following tables describes the error messages that may appear during POST . Each message is listed w ith a detailed description of the error .
Chapter 4 63 Storage Device Message Displayed Description Primary Master Hard Disk Error The IDE/A T API device configured as Primary Master could not be properly initialized by the BIOS. This message is ty pically displayed when the BIOS is trying to detect and configure IDE/A T API devices in POST .
64 Chapter 4 Virus Related 3rd Slave Drive - A T API Incompatible The IDE/A T API de vice configured as Slave in the 3rd IDE controller failed an A T API compatibility test. This mess age is typically displayed when the BIOS is trying to detect and configure IDE/A T API de vices in POST .
Chapter 4 65 System Configuration Message Displayed Description DMA-1 Error E rror initializing primary DMA controller . This is a fatal error , of ten indication a problem with syst em hardware. DMA-2 Error E rror initializing secon dary DMA controll er .
66 Chapter 4 CMOS Miscellaneous Message Displayed Description CMOS Date/Time Not Set The CMOS Date and/or Time are invalid. This error can be resolved by readjusting the system time in AMIBIOS Setup. CMOS Battery Low CMOS Battery is low . This message usual ly indicates that the CMOS battery need s to be replaced.
Chapter 4 67 USB eModule Error Messages SMBIOS eModule Error Messages CPU eModule Error Messages MPS Table (Multi-processor) eModule Error Messages Message Displayed Description Wa r n i n g ! Unsupported USB device found and disabled! This message is d isplayed when a non-bootable USB device i s enumerated and disabled by the BIOS.
68 Chapter 4 Online Support Information This section describe s online technical support services av ailable to help yo u repair the desktop computer . If you are a distributor , dealer , ASP or TPM, please re fer your techn ical que ries to your local Acer branch office.
Chapter 5 69 System Block Diagram System Block Diagram and Board Layout Chapter 5.
70 Chapter 5 Board Layout Mainboard No Code Description 1 LEDH1 Power and switch LED cable connector 2 USBF4 Front USB connector 3 USBF3 Front USB connector 4 USBF2 Front USB connector 5 USBF1 Front U.
Chapter 5 71 15 PWR2 24-pin A TX power connecto r 16 SA T A0 SA T A 0 connector 17 SA T A3 SA T A 3 connector 18 FIREH1 1394 connector 19 KBMSCONN1 T o p: PS2 Mouse port Bottom: PS2 Keyboard port 20 H.
72 Chapter 5 System Jumper Name Location Default Settings Clear CMOS/NVR AM JBIOS1 1-2 2-3 Normal (default) Clear CMOS/NVRAM.
Chapter 6 73 This chapter offers the FRU (Field Replaceable Unit) list in global config uratio n of the X3810/X5810 desktop computer . Refer to this chapter w henever ordering th e part s to re pair or for RMA (Return Merchandise Authorization).
74 Chapter 6 X3810/X5810 Exploded Diagram.
Chapter 6 75 No. Part Name 1 C.A LED POWER SWITCH 2E J E C T B U T T O N 3 FRONT BEZEL 4 FRONT COVER 5 IO DOOR 6 IO DOOR BKT 7 LENS POWER 8M A G N E T 1 0 * 6 * 3 9 MIDDLE BEZEL 10 ODD DOOR 1 1 ODD LI.
76 Chapter 6 X3810 FRU List Category Part Name Acer Part Number ACCESSORY REMOTE CONTROLLER REMOTE CONTROLER SMK VIST A MCE ICONIZED RC WITH 2 BA TTERIES FOR EMEA R T .1 1300.001 REMOTE CONTROLER SMK VIST A MCE ICONIZED RC WITH 2 BA TTERIES F OR US RT .
Chapter 6 77 MODEM CARD LITE-ON D-1 156E#A10A LOW-PROFILE PCI-E 56K V .92 FX.10100.003 MODEM CARD 56K PRO-NETS LSI HPE56L6 (LO FX.10100.021 MODEM CARD 56K PRO-NETS USB FX.10100.001 TV TUNER CARD PCIE SINGLE ISDB-T TU.10500.037 TV TUNER CARD YUAN PE988-D PCI TU.
78 Chapter 6 LOWER CASE 60.SC101.004 HDD&ODD COVER BRACKET 33.SC101.002 DVI TO VGA DONGLE CONNECT OR D0.VGA26.P01 COMBO MODULE/ DVD-ROM DRIVE ODD HLDS BD COMBO SA T A HH DL 4X CH10F LF W/BRACK BEZEL SA T A KO.00605.001 ODD PIONEER BD COMBO SA T A HH DL 4X BDC-2 03RS W/BRACKET BEZEL SA T A KO.
Chapter 6 79 HDD/HARD DISK DRIVE HDD 160GB 3.5" 7200RPM SA T A II SEAGA TE ST3160815AS KH.16001.031 HDD 160GB 3.5" 7200RPM SA T A II HGST HDT721016SLA380 KH.16007.023 HDD 160GB 3.5" 7200RPM SA T A II WD WD1600AAJS-22L7A0 XL320S-3 KH.16008.
80 Chapter 6 KEYBOARD PS2 104KEY CHICONY KB-07593S32552V RUSSIAN BLACK KB.PS203.121 KEYBOARD PS2 105KEY CHIOCNY KB-07596HU2552V HUNGARIAN BLACK KB.PS203.122 KEYBOARD PS2 104KEY CHICONY KB-07593GR2552V GREEK BLACK KB.PS203.123 KEYBOARD PS2 105KEY CHICONY KB-07596DK2552V DANISH BLACK KB.
Chapter 6 81 KEYBOARD PS2 105KEY LITE-ON SK-9620 SG-30600-35W SWEDISH BLACK VIST A KB.PS2 0B.0 25 KEYBOARD PS2 105KEY LITE-ON SK-9620 SG-30600-2BW UK BLACK VIST A KB.PS20 B.026 KEYBOARD PS2 109KEY LITE-ON SK-9620 SG-30600-2VW JAP ANESE BLACK VIST A KB.
82 Chapter 6 KEYBOARD USB 105KEY CHICONY KU-07606CH2552V SWISS/G BLACK KB.USB03.079 KEYBOARD USB 105KEY CHICONY KU-07606B02552V BELGIUM BLACK KB.USB03.080 KEYBOARD USB 105KEY CHICONY KU-07606IC2552V ICELANDIC KB.USB03.081 KEYBOARD USB 105KEY CHICONY KU-07606N02552V NORWEGIAN BLACK KB.
Chapter 6 83 KEYBOARD USB 105KS LITE-ON SK-9625 BLACK BELGIUM KB.USB0B.061 KEYBOARD USB 105 KEY LITE-ON SK-9625 SG-30700-2WW BLACK ICELANDIC VIST A KB.USB0B.062 KEYBOARD USB 105KS LITE-ON SK-9625 BLACK NORWEGIAN KB.USB0B.063 KEYBOARD USB 104 KEY LITE-ON SK-9625 SG-30700-XTW BLACK HEBREW VIST A KB.
84 Chapter 6 POINTING DEVICE MOUSE PS2 OPT SM-9620 LITEON SM-30600-00W MS.1 1200.017 LOGITECH 0810_PS2 OPTICAL MOUSE PS2 M-SBR-ACR2 MS.1 1200.013 MOUSE USB OPT SM-9625 LITEON SM-30700-00W MS.1 1200.018 LOGITECH 0810_USB OPTICAL MOUSE USB M-UA Y -ACR2 MS.
Chapter 6 85 X5810 FRU List Category Part Name Acer Part Number ACCESSORY REMOTE CONTROLLER REMOTE CONTROLER SMK VIST A MCE ICONIZED RC WITH 2 BA TTERIES FOR EMEA R T .1 1300.001 REMOTE CONTROLER SMK VIST A MCE ICONIZED RC WITH 2 BA TTERIES F OR US RT .
86 Chapter 6 MODEM CARD LITE-ON D-1 156E#A10A LOW-PROFILE PCI-E 56K V .92 FX.10100.003 MODEM CARD 56K PRO-NETS LSI HPE56L6 (LO FX.10100.021 MODEM CARD 56K PRO-NETS USB FX.10100.001 TV TUNER CARD PCIE SINGLE ISDB-T TU.10500.037 TV TUNER CARD YUAN PE988-D PCI TU.
Chapter 6 87 LOWER CASE 60.SC101.004 HDD&ODD COVER BRACKET 33.SC101.002 DVI TO VGA DONGLE CONNECT OR D0.VGA26.P01 COMBO MODULE/ DVD-ROM DRIVE ODD HLDS BD COMBO SA T A HH DL 4X CH10F LF W/BRACK BEZEL SA T A KO.00605.001 ODD PIONEER BD COMBO SA T A HH DL 4X BDC-2 03RS W/BRACKET BEZEL SA T A KO.
88 Chapter 6 HDD/HARD DISK DRIVE HDD 160GB 3.5" 7200RPM SA T A II SEAGA TE ST3160815AS KH.16001.031 HDD 160GB 3.5" 7200RPM SA T A II HGST HDT721016SLA380 KH.16007.023 HDD 160GB 3.5" 7200RPM SA T A II WD WD1600AAJS-22L7A0 XL320S-3 KH.16008.
Chapter 6 89 KEYBOARD PS2 104KEY CHICONY KB-07593S32552V RUSSIAN BLACK KB.PS203.121 KEYBOARD PS2 105KEY CHIOCNY KB-07596HU2552V HUNGARIAN BLACK KB.PS203.122 KEYBOARD PS2 104KEY CHICONY KB-07593GR2552V GREEK BLACK KB.PS203.123 KEYBOARD PS2 105KEY CHICONY KB-07596DK2552V DANISH BLACK KB.
90 Chapter 6 KEYBOARD PS2 105KEY LITE-ON SK-9620 SG-30600-35W SWEDISH BLACK VIST A KB.PS2 0B.0 25 KEYBOARD PS2 105KEY LITE-ON SK-9620 SG-30600-2BW UK BLACK VIST A KB.PS20 B.026 KEYBOARD PS2 109KEY LITE-ON SK-9620 SG-30600-2VW JAP ANESE BLACK VIST A KB.
Chapter 6 91 KEYBOARD USB 105KEY CHICONY KU-07606CH2552V SWISS/G BLACK KB.USB03.079 KEYBOARD USB 105KEY CHICONY KU-07606B02552V BELGIUM BLACK KB.USB03.080 KEYBOARD USB 105KEY CHICONY KU-07606IC2552V ICELANDIC KB.USB03.081 KEYBOARD USB 105KEY CHICONY KU-07606N02552V NORWEGIAN BLACK KB.
92 Chapter 6 KEYBOARD USB 105KS LITE-ON SK-9625 BLACK BELGIUM KB.USB0B.061 KEYBOARD USB 105 KEY LITE-ON SK-9625 SG-30700-2WW BLACK ICELANDIC VIST A KB.USB0B.062 KEYBOARD USB 105KS LITE-ON SK-9625 BLACK NORWEGIAN KB.USB0B.063 KEYBOARD USB 104 KEY LITE-ON SK-9625 SG-30700-XTW BLACK HEBREW VIST A KB.
Chapter 6 93 POINTING DEVICE MOUSE PS2 OPT SM-9620 LITEON SM-30600-00W MS.1 1200.017 LOGITECH 0810_PS2 OPTICAL MOUSE PS2 M-SBR-ACR2 MS.1 1200.013 MOUSE USB OPT SM-9625 LITEON SM-30700-00W MS.1 1200.018 LOGITECH 0810_USB OPTICAL MOUSE USB M-UA Y -ACR2 MS.
94 Chapter 6.
Appendix A 95 This section provides technica l specifications for the system. Processor Intel Core 2 Quad Item Specif ication Model number Q6600 Q8200 Q8300 Q9300 Q9400 Q9550 Q9650 Core (nm) 65 45 45 45 45 45 45 L2 cache size (MB) 8 4 4 6 6 12 12 Clock speed (GHz) 2.
96 Appendix A System Board Majo r Chips Intel Pentium Dual-Core Item Specification Model number E2220 E5200 E5300 E5400 Architecture (n m) 65 45 45 45 L2 cache size (MB) 1 2 2 2 Clock speed (GHz) 2.4 2.5 2.6 2.7 Front side bus (MHz) 800 800 800 800 Frequency (MHz) 24 00 2500 2600 2700 Socket LGA 775 LGA 775 LGA 775 LGA 775 Clock multiplier 12 x 12.
Appendix A 97 System Memory System BIOS Item Sp ecification Memory controller Intel G43/G45 Express chipset Memory type DDR3-1066/1333 unbuffered DIMM Module name PC 3-8500/10600 Organization ECC DIMM.
98 Appendix A Hard Disk Drive VGA Interface PCI Interface Network Interface SA T A Interface Item Sp ecification S torage contro ller NVIDIA NFo rce MCP73PV 1048 BGA V endor WD Seagate HGST Model no.
99 Appendix A Audio Interface Keyboard and Input Device s Optical Drive Item Specification Audio controller Realtek ALC888S 8-channel audio COD EC Connectors Audio 7.
Appendix A 100 Read S peed DVD-R/RW/ROM(SL/DL) 10x / 8x / 16x / 12x max. DVD-R DL8x max. DVD-RAM (V er .1.0/2.2) 2x/ 3x-5x PCA V DVD+R/ + R W 1 0 x / 8 x m a x . D V D + R D L 8 x m a x . CD-R/RW/ROM 40x / 40x / 40x max. CD-DA (DAE) 40x max. 80 mm CD 10x max.
101 Appendix A DVD-ROM Item Specification V endor H LDS PL DS Model name DH10N DH-16D4S Drive type DVD-ROM DVD-ROM Write S peed — — Read S peed CD-ROM Max 52x DVD-ROM Max 16x DVD-ROM (single l aye.
Appendix A 102.
An important point after buying a device Acer Aspire X3810 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acer Aspire X3810 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acer Aspire X3810 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acer Aspire X3810 you will learn all the available features of the product, as well as information on its operation. The information that you get Acer Aspire X3810 will certainly help you make a decision on the purchase.
If you already are a holder of Acer Aspire X3810, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acer Aspire X3810.
However, one of the most important roles played by the user manual is to help in solving problems with Acer Aspire X3810. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acer Aspire X3810 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
