Instruction/ maintenance manual of the product 1726564 Snapper
Go to page of 14
A TT A CHMENT OPERA T OR’S MANU AL Wide Body Cart Grass Catcher Mfg. No. Description 1694542 Wide Body Cart Grass Catcher (Multiple Applications) 1726564 Revision 01 Rev.
1 T able of Contents Initial Assembl y & Installation Car t Assembly .................................................8 Cov er Assemb ly ...............................................9 Normal Installation & Remov al Installation .............
2 Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The trian- gle in text signifies important cautions or warnings which must be followed.
3 BEFORE OPERA TION Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Check grass condition. If wet, wait until later in the day. If grass is wet, the grass catcher is likely to become plugged.
4 Operation MAINTENANCE Cleaning Clear T ube To clean the clear tube, wash with warm water and mild soap or detergent. Use a soft, clean sponge or cloth. DO NOT use abrasive, alkaline, or petroleum based cleaners. Cover The cover can be rinsed with a hose when dirty.
5 Notes.
6 Exploded V iew Diagrams Figure 3. Wide Body Dump Cart 11 17 15 12 18 19 16 14 21 27 25 29 22 28 24 26 23 12 31 37 35 13 32 13 34 36 33 1 7 5 9 2 8 4 17 3 10 6 19 6 20 38 19 14 30 28 39 6 No.
7 Offset Offset 3/4” 1-1/2” B Figure 4. Left Side Discharge A. Handle, Latch C. Frame B. U-Bracket, Hole 1-1/2” from edge Figure 5. Right Side Discharge A. Handle, Latch C. Frame B. U-Bracket, Hole 3/4” from edge. Rever sible Frame Orientation For Left Side discharge locate the handle (A, Figure 4) on the right side of the cart.
8 CAR T ASSEMBL Y 1. Determine if you have a right side or left side dis- charge. Refer to Figures 4 & 5. 2. Install the wheel assemblies (A, Figure 6) to the frame (B). Place the head of the swivel wheel on the end of the frame. Align the holes and place four 3/8- 16 x 1 hex bolts up through the frame and head of the swivel.
9 Initial Installation & Assembly 6. Install support tube (A, Figure 10) inside the box. Align each end of the support tube with the two holes at the front corner side of the box. Place one 5/16-18 x 1-1/2 hex bolt with a 5/16 flat washer and plastic spacer through the top, outside hole of the box and the support tube.
10 Initial Assembly & Installation 6. Install the sleeve clamp (C, Figure 15) to the connect- ing sleeve (A) with 1/4-20 x 1/2 slotted truss head screw (D) and nyloc nut (E). Install the connecting sleeve inside the collar of the cover and position sleeve clamp (C) over the support tube (B).
11 Normal Removal & Installation NORMAL INST ALLA TION & REMO V AL Installation 1. Insert the upper end of the clear tube into the cart sleeve. Slide the flex hose (C, Figure 20) over the turbo (A) and secure with the large hose clamp (B). The hose should overlap the turbo discharge by 2”- 3”.
T orque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.
MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 2004 Simplicity Manufacturing, Inc.
An important point after buying a device Snapper 1726564 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper 1726564 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper 1726564 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper 1726564 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper 1726564 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper 1726564, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper 1726564.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper 1726564. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper 1726564 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
