Instruction/ maintenance manual of the product 1725580 Snapper
Go to page of 14
A TT A CHMENT OPERA T OR’S MANU AL Clean Sweep T riple Catcher Mfg. No. Description 1694390 Hitch & Tube Kit (For Use With Legacy XL / 2000 / 2900) 1694389 Clean Sweep Triple Catcher 1725580 Rev.
1 Assemble Catcher Bags ..................................8 Install Cov er .....................................................8 Removing & Reattac hing the T riple Catcher Removing the Gr ass Catcher ..........................9 Reattaching the Grass Catcher .
2 Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The trian- gle in text signifies important cautions or warnings which must be followed.
3 BEFORE OPERA TION Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Check grass condition. If wet, wait until later in the day. If grass is wet, the grass catcher is likely to become plugged.
4 Initial Hitch Installation - Models with out 3-Point Hitch Figure 1. Install Side Brackets A. Side Brackets E. Lockwashers, 1/2 B. Spacers F. Clevis Pins C. Nuts, 1/2-13 G. Safety Clips D. Capscrews, 1/2-13 x 2-1/2 A F Figure 3. Install Back Plate A.
5 Initial Hitch Installation Models with 3-Point Figure 4. Install Side Brackets A. Tube Assembly & Mounting Hardware B. Clevis Assembly & Mounting Hardware C. Lower Link & Chain Assembly D. Hair Pin E. Clevis Pin D B C C Figure 5. Install Side Brackets A.
6 INITIAL INST ALLA TION & ASSEMBL Y Assemble Fr ont and Back Plate 1. For units with left side discharge use the set of holes on the right side of the back plate. For units with right side discharge use the set of holes on the left side of the back plate.
7 Initial Installation & Assembly Figure 8. Assemble Tubes & Deflector A B G G C D E I I J J K J H H L K K J M J A. Deflector B. Back Plate C. Capscrew, 5/16-18 x 1 D. Socket E. Upper Tube F. Lower Tube G. Rubber Strap H. Nut I. Capscrew, 1/4-20 x 1-1/4 J.
8 Initial Installation & Assembly Assemble Catcher Ba gs See Figure 11. 1. Insert the wire hoop (H) through the cloth bag (B). 2. Install the clamp (E) and hanger bracket (D). Secure with two 5/16-18 x 3/4 carriage bolts (C), lockwashers (G), and nuts (F).
9 Removing & Reattaching Grass Catcher REMO VING THE GRASS CA TCHER 1. Remove the hair pin clips (D, Figure 15) and hinge pins (B) and remove the cover (A). 2. Remove the bags (A, Figure 16) by lifting them off their hooks. Empty any grass out the bags.
10 Removing & Reattaching REA TT A CHING THE GRASS CA TCHER Models with out 3-P oint Hitch 1. Set the front and back plate assembly on the pins (Figure 19). 2. Secure with the long hitch pin (C, Figure 19) Models with 3-P oint Hitch 1. Set the front and back plate assembly on the clevis pins (Figure 20).
11 Removing & Reattaching Figure 23. Install HInge Pins A. Cover C. Hinge B. Hinge Pin D. Hair Pin Clip A B C D Figure 22. Install Cover A. Cover C. Hinges B. Bags A Figure 24. Assemble Tubes A. Upper Tube C. “S” Hooks B. Lower Tube D. Rubber Strap A B C D C B 3.
12 T orque Specification Chart FOR ST ANDARD MACHINE HARDW ARE (T olerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.
MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 2004 Simplicity Manufacturing, Inc.
An important point after buying a device Snapper 1725580 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper 1725580 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper 1725580 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper 1725580 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper 1725580 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper 1725580, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper 1725580.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper 1725580. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper 1725580 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
