Instruction/ maintenance manual of the product 1695464 Snapper
Go to page of 16
A TT A CHMENT OPERA T OR’S MANU AL T riple Bag Catcher with T urbo (For use on 54-Inch Mower Deck) Mfg. No. Description 1695464 Triple Bag Catcher with Turbo 1736061 Rev.
THIS P A GE INTENTIONALL Y BLANK (FOR PLA CEMENT ONL Y - DO NO T PRINT).
1 T riple Catcher Bag Installation Install Hitch Plate .............................................8 Install Upright Suppor t .....................................8 Install Bag and Cov er Suppor t.........................8 Install Cov er Assemb ly ..
Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The triangle in text signifies important cautions or warnings which must be followed.
3 Safety Rules and Information SAFETY DECALS This unit has been designed and manufactured to pro- vide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.
4 Bef ore Operation Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Check grass condition. If wet, wait until later in the day. If grass is wet, the grass catcher is likely to become plugged.
5 General Operating Instructions CA UTION Before you begin operating the unit be certain you have read all of the safety and operational information of this instruction sheet, as well as the Operator’s Manual for the tractor and any other attachments.
T urbo Installation 1. Remove and discard existing baffle from the left side of the mower deck. It is replaced by turbo baffles. 2. Install the left (23-1/2” long) baffle and right (26-1/2” front baffle (A and B, Figure 1) using six carriage bolts (C), lockwashers (D), and nuts (E).
T urbo Installation Install Deflector and Hinge 1. Install the new deflector and hinge assembly (A, Figure 3) onto 54-inch mower deck. 2. Secure front of hinge bracket using a new carriage bolt (B), cylinder spacer (C), lockwasher (D), and nut (E). 3.
D A B Install Upright Suppor t 1. Set the upright support (A, Figure 7) onto pins of hitch plate (B) 2. Secure with rod (C) and hair pin (D). C Figure 7. Install Upright Support A. Upright Support C. Rod B. Hitch Plate D. Hair Pin T urbo Installation / T riple Catcher Bag Installation Install Hitch Plate 1.
T riple Catcher Bag Installation Install Co ver Assembl y 1. Attach the collector cover (A, Figure 9) to bag and cover support (B) using hinge pivots (C). 2. Secure the collector cover using cover hinge pins (D) and hair pins (E). A E C Figure 9. Install Cover Assembly A.
T riple Catcher Bag Installation Connect Upper and Lower T ubes 1. Slide upper tube (A, Figure 11) into opening in col- lector cover (B). 2. Slide lower tube (C) over opening in turbo assembly (D). 3. Slip one end of rubber strap (E) through clamp (F) on lower tube.
T riple Catcher Bag Installation / T urbo Removal Figure 12. Install Carrier and Front Weight(s) A. Carrier, Weight D. Weight(s) B. 1/2-13 x 1-1/4, E. Rod Capscrews F. Safety Clips C. 1/2-13 Locknuts A B F D E Install Carrier and Fr ont W eight(s) 1. Install carrier (A, Figure 12) as shown and secure with capscrews (B) and locknuts (C).
12.
13.
www.Snapper.com Briggs & Stratton Power Products Group, L.L.C. Copyright © 2008 Briggs & Stratton Corporation Milwaukee, WI USA. All Rights Reserved www.
An important point after buying a device Snapper 1695464 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper 1695464 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper 1695464 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper 1695464 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper 1695464 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper 1695464, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper 1695464.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper 1695464. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper 1695464 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
