Instruction/ maintenance manual of the product 1695195 Snapper
Go to page of 8
Hydraulic Lift Manual Lift ( Add to early models already present on current models) F ront Hole f or Dozer Applications Rear Hole f or Snowthrower Applications 1 Installation Instructions Sub-Frame Hitch Mfg. No . 1695195 For Prestige / 1800 / 2800 & Conquest / 1700 / 2700 Series Figure 1.
2 Installation Instructions Sub-Frame Hitch Figure 3. Assemble Lift Rod A. Lift Rod C. Spring B. Set Collar D. Rod Guide B C D B A NOTE: Please read through these instructions and the instructions of any other attachments before beginning installation.
3 Sub-Frame Hitch Installation Instructions A F C D G Figure 6. Lift Link - Manual Lift Models A. Pin B. Rear Hole of Lift Bar (Snowthrower/Dozer Applications) C. Spacer D. Hair Pin Clip E. Upper Hole (Snowthrower/Dozer Applications) F. Slot of Lift Link (Mower Applications) G.
4 Installation Instructions Sub-Frame Hitch Figure 7. Install Hitch A. J-Hooks D. Hook B. Hitch Rod E. Clamp Plate C. Hitch Rod A B D E Install Hitch 1. Slide the hitch under the tractor. 2. Raise the rear of the hitch and place the hook (C) over the lift shaft.
5 Sub-Frame Hitch Installation Instructions Install Lift Rod 1. Slide the lift lever (A, Figure 8) onto the end of the tractor lift shaft (B) under the right side footrest. 2. Use the tabs on the lift lever (A) to capture the tractor lift arm. Secure in place w ith a clevis pin (D) and safety clip (C).
6 Installation Instructions Sub-Frame Hitch REMO V AL NOTE: After removing components, reinstall the clevis pins and clips to prevent loss. 1. Disconnect the lift rod from the attachment and lift lever (C, Figure 10). 2. Remove the clevis pin and clip from the lift lever (C) and remove the lift lever.
7 Sub-Frame Hitch Installation Instructions A F C D G Figure 12. Lift Link - Manual Lift Models A. Pin B. Rear Hole of Lift Bar (Snowthrower/Dozer Applications) C. Spacer D. Hair Pin Clip E. Upper Hole (Snowthrower/Dozer Applications) F. Slot of Lift Link (Mower Applications) G.
8 Installation Instructions Sub-Frame Hitch Form No. 1733910-03 Rev. 12/2006 © 2006 Briggs & Stratton, Inc. All Rights Reserved TP 200-4442-03-AT-SMAN MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA Figure 4.
An important point after buying a device Snapper 1695195 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper 1695195 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper 1695195 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper 1695195 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper 1695195 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper 1695195, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper 1695195.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper 1695195. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper 1695195 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
