Instruction/ maintenance manual of the product 1694947 Snapper
Go to page of 4
1 Installation Instructions Lift Le ver Kit Mfg. No . 1694947 For Broadmoor / 200 / 1600 / 2600 Series Figure 1. Contents Kit Contents: Ref Part No. Qty.
2 Installation Instructions Lift Lever Kit INST ALLA TION ALL MODELS 1. Remove mower deck as described in the Operator’s Manual. 2. Remove nuts (A, Figure 4) and capscrews (B) which hold the right rear seat deck (C) to the frame(D). Discard capscrews.
3 Lift Lever Kit Installation Instructions 3. Mount the lift shaft assembly (A, Figure 7) to the frame using three 5/16-18 x 1 capscrews (B) and 5/16-18 flange nuts (C) as shown. 4. Install 5/16-18 x 1-1/2 capscrew (D), spacer (F), bell crank (G), washer & 5/16-18 nut (I).
4 Installation Instructions Lift Lever Kit Figure 8. Install Lift lever Assembly. A. Lift Lever Assembly C. Hair Pin B. Clevis Pin D. Mounting Bracket C Install Front Attac hment Lift Lever & Rod ALL MODELS 1. Slide the lift lever assembly (A, Figure 8) on to the end of the shaft assembly and on to the edge of the tractor.
An important point after buying a device Snapper 1694947 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper 1694947 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper 1694947 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper 1694947 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper 1694947 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper 1694947, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper 1694947.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper 1694947. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper 1694947 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
