Instruction/ maintenance manual of the product 1694153 Snapper
Go to page of 12
A TT A CHMENT OPERA T OR’S MANU AL T urbo Clean Sweep T win Catcher Mfg. No. Description 1694153 Turbo Clean Sweep Twin Catcher (Multiple Applications) 1694693 Turbo Clean Sweep Twin Catcher (Multip.
1 Catcher Assembl y - All Models Assemble Supports & Hitch .............................5 Install Cov er & Bags ........................................6 Assemble & Install T ubes ................................6 Normal Remov al & Installation Remov al .
2 Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The trian- gle in text signifies important cautions or warnings which must be followed.
3 BEFORE OPERA TION Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Check grass condition. If wet, wait until later in the day. If grass is wet, the grass catcher is likely to become plugged.
4 Initial Assembly & Installation Figure 1. Install Side Brackets A. Nylock Nut, 3/8-16 C. 3/8-16 x 1 B. Side Bracket A B C Figure 2. Install Rear Spacers A. Nylock Nuts, 1/2-13 C. Spacers B. 1/2-13 x 2-1/2 Capscrew D. 1/2” Washers Figure 3. Install Rear Spacers A.
5 Initial Assembly & Installation Figure 5. Assemble Catcher Frame A. Upright Support C. Horizontal Support B. 3/8-16 x 7/8 Capscrew D. 3/8-16 Whizlock Nut A B C D Figure 6. Assemble Catcher Frame (Prestige Shown) A. 3/8-16 Nut & Lockwasher C.
6 Initial Assembly & Installation Figure 8. Install Catcher (Prestige Shown) A. #10-32 Nut F. Bags B. Handle G. Hair Pin Clip C. #10-32 x 1/2 Screw H. Catcher Hitch D. Cover I. Spacers E. Hinge Pin Figure 9. Install Cable A. Cable C. Washer B. Support I A B C D E F H G Install Cover and Ba gs 1.
7 Normal Removal & Installation W ARNING OPERATION WITHOUT TURBO & CATCHER For operation without turbo, the mower deflector MUST be properly installed in the down position and retained by the spring latch (see turbo operator’s manual). Figure 11.
8 Installation with a T iller INST ALLA TION WITH A TILLER Initial Setup Note: Use the short upright bracket (refer to Figure 4). 1. Assemble the lower support (E, Figure 12), spacers (D), and plate (C) as shown).
9 Notes.
T orque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.
MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 2005 Simplicity Manufacturing, Inc.
An important point after buying a device Snapper 1694153 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper 1694153 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper 1694153 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper 1694153 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper 1694153 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper 1694153, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper 1694153.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper 1694153. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper 1694153 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
