Instruction/ maintenance manual of the product 18013001 Axor
Go to page of 12
Installation Instructions / W arranty Massaud 18013001 Massaud 18213001.
2 Massaud Lavator y Faucet 18013001 Massaud Bidet Faucet 18213001 18013001 18213001.
3 Product Specification Max. flow rate 2.2 gpm Max. incoming water pressure 145 psi Recommended water pressure 14.5 - 72 psi Max. hot water temperature 176 o F* Recommended hot water temp. 120 o F - 140 o F* Hole size in mounting surface valves 1 1/4” spout 1 3/8” Max.
4 T urn the cartridge stems so that they are in the “off” posi- tion. T urn the hot stem clockwise, the cold stem counter- clockwise. Push the red color ring and hot handle firmly over the hot (left) valve (1). Push the blue color ring and handle firmly over the cold (right) valve (2).
5 T ighten the tensioning screws. Place a compression nut and compression ferrule over the end of the connection hose -- the lavator y ferrule should be installed metal side first. Attach the connection hose to the valve outlet port. Use two wrenches, as shown, to keep the hose from twisting.
6 Install the filters on the stops. Install the adapters on the filters. Push the compression nut and ferrule (metal side first) over the end of the hose. The following steps apply only to lavatory faucet 18013001: Install the hot and cold supply hoses to the valve inlet ports by hand -- do not use a wrench.
7 Push the end of the hose into the adapter . While holding the hose steady with an 11 mm wrench, use a 19 mm wrench to tighten the compression nut. If the flow of water from the faucet becomes less over time, remove and clean the filter screens. Install the drain pull rod.
8 Install the pop-up drain Remove the plunger assembly . Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. W rap the threads with plumbers’ thread tape and replace. Install the white, flexible sealing gasket to the flange.
9 Replacement Parts 1 spout 98658000 2 spray former 97447000 3 pull rod 97158000 4 hot cartridge 94009000 5 valve 97357000 6 fixation set 13961000 7 connection hose 94071000 8 compression ftg 94158000.
10 Cleaning Recommendation for Hansgrohe Pr oducts Modern sanitar y faucetry and shower fixtures consist of ver y different materials to comply with the needs of the market with regard to design and functionality .
11 and (ii) for 5 years, with respect to AXOR products. THIS W ARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT P A Y FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770 360-9880 • Fax 770 360 9887 www .hansgrohe-USA.com US - Installation Instructions • Part No.
An important point after buying a device Axor 18013001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axor 18013001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axor 18013001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axor 18013001 you will learn all the available features of the product, as well as information on its operation. The information that you get Axor 18013001 will certainly help you make a decision on the purchase.
If you already are a holder of Axor 18013001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axor 18013001.
However, one of the most important roles played by the user manual is to help in solving problems with Axor 18013001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axor 18013001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
