Instruction/ maintenance manual of the product 1687262 Snapper
Go to page of 4
1 Installation Instructions T ube and Latch Kit P ar t No . 1687262 Note: Use these Instructions to supplement portions of the Operator’s Manual for Twin Catcher 1694916. Keep these Instructions for future reference. INST ALLA TION 1. Apply new ID Label (A, Figure 2) directly over exist- ing product ID Label on channel assembly (B).
2 Installation Instructions T ube and Latch Kit A B C C C Figure 3. Drill Adapter Plate Holes A. Cover Plate B. Grass Catcher Cover C. New13/64” Hole Locations A B E C Figure 4. Install Seal and Cover Plate A. Cover Plate B. Grass Catcher Cover C. Screw, Phillips, #10-24 x 3/4 D.
3 T ube and Latch Kit Installation Instructions 2“ Drill 11/32” Hole Here 4. Drill a new 11/32 hole (A, Figure 5) 2” from the exist- ing hole (B) in boot (C) as shown. 5. Secure the puck (B, Figure 6) to boot (A) using 5/16- 18 x 3/4 capscrew (C) and 5/16-18 locknut (D).
4 Installation Instructions T ube and Latch Kit 8. Install the “U” tube (A, Figure 9) and “L” channel (F) to channel assembly (B) securing with 5/16-18 x 3/4 carriage bolts (C) and 5/16-24 nuts (E). 9. Using the “L” channel as a guide drill two 11/32 holes (G) in “U” tube (A) as shown.
An important point after buying a device Snapper 1687262 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper 1687262 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper 1687262 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper 1687262 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper 1687262 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper 1687262, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper 1687262.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper 1687262. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper 1687262 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
