Instruction/ maintenance manual of the product 155223 Snapper
Go to page of 40
Safety Instructions & Operator's Manual for TWO STAGE INTERMEDIATE FRAME SNOW THROWER SERIES 3 MODELS 155223 17243 MODEL NUMBER EXPLANATION MODEL DESIGNATION ENGINE HP II Iss122131 I I SERIES DESIGNATION AUGER WIDTH I - Intermediate Frame Model 55 - 5.
IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following instructions may result in serious injury to the operator or other persons.
IMPORTANT SAFETY INSTRUCTIONS OPERATIONAL PRECAUTIONS (Continued From Previous Page) 7. DO NOT put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. 8. Start engine only where exhaust fumes will be safely dissipated.
TABLE OF CONTENTS SECTION 1 - IMPORTANT SAFETY INSTRUCTIONS .......................... 2-3 TABLE OF CONTENTS ............................................................................ 4 SECTION 2 - OPERATING INSTRUCTIONS ............................
Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check engine oil and add oil as needed to bring level up to the FULL mark. Refer to engine owner's manual for oil specifications 2.
Section 2 - OPERATING INSTRUCTIONS 2.2 STARTING, OPERATION & STOPPING (RECOIL START MODELS) (Go to Page 8 for Electric Start Models) 2.2.1. ENGINE 1. Turn fuel shut off valve to the "ON" position. See Figure 2.3. TURN VALVE TO "ON" POSITION FIGURE 2.
Section 2 - OPERATING INSTRUCTIONS Objects can be thrown by the snow thrower while it is in operation. Thrown objects could cause serious injury to the operator or bystanders. Always wear safety goggles or other suitable eye protection. Keep people and pets away from area.
Section 2 - OPERATING INSTRUCTIONS 2.2 STARTING, OPERATION & STOPPING (ELECTRIC START MODELS) (Go to Page 6 for Recoil Start Models) DO NOT use an electrical extension cord that is damaged. A damaged electrical extension cord could cause a shock or fire.
Section 2 - OPERATING INSTRUCTIONS WARNING Objects can be thrown by the snow thrower while it is in operation. Thrown objects could cause serious injury to the operator or bystanders. Always wear safety goggles or other suitable eye protection. Keep people and pets away from area.
Section 3 - MAINTENANCE DO NOT attempt any adjustments, maintenance, service, or repairs, with engine running. Stop auger. Stop engine. Remove key. Disconnect spark plug wire and secure wire away from spark plug. 3.1 INTRODUCTION To retain the quality of the snow thrower, use only genuine SNAPPER replacement parts.
Section 3 - MAINTENANCE 3.4 ANNUALLY (END OF EACH SEASON) Perform all maintenance as described in the maintenance schedule. 3.4.1. Engine Refer to engine owner's manual for service instructions. 3.4.2. Spark Plug Refer to engine owner's manual for service instructions.
Section 4 - REPAIR & ADJUSTMENTS DO NOT attempt any adjustments, maintenance, service, or repairs, with engine running. Stop auger. Stop engine. Remove key. Disconnect spark plug wire and secure wire away from spark plug. 4.1 AUGER and WHEEL DRIVE BELT ADJUSTMENT/REPLACEMENT When operating machine release the auger clutch control.
Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any adjustments, maintenance, service, or repairs, with engine running. Stop auger. Stop engine. Remove key. Disconnect spark plug wire and secure wire away from spark plug. Before tilting machine, drain all the fuel from fuel tank.
Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any adjustments, maintenance, service, or repairs, with engine running. Stop auger. Stop engine. Remove key. Disconnect spark plug wire and secure wire away from spark plug. Before tilting machine, drain all the fuel from fuel tank.
Section 4 - REPAIR & ADJUSTMENTS 4.1.5. GROUND SPEED ADJUSTMENT NOTE: It is recommended to remove the drive system cover and check rubber drive tire engagement with drive disc when adjusting ground speed. 1. Tilt machine forward to gain access to drive system area.
Section 4 - REPAIR & ADJUSTMENTS 4.1.8. SINGLE HANDLE CONTROL ADJUSTMENT (7 HP Models Only) IMPORTANT: Standing in the operator's position, the left handle bar lever is for wheel drive engagement and disengagement. The right handle bar lever is for auger/impeller engagement and disengagement.
Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any adjustments, maintenance, service, or repairs, with engine running. Stop auger. Stop engine. Remove key. Disconnect spark plug wire and secure wire away from spark plug. Before tilting machine, drain all the fuel from fuel tank.
PROBLEM Engine Will Not Start Using Recoil Starter Engine Will Not Start Using Electric Starter Engine Stalls or Stops After Running Engine Loses Power Excessive Vibration Poor Snow Discharging TROUBLESHOOTING 1. 2. 3. 4. 1 2. 3. 1 2. 3. 4. 5. 1 2. 3.
3 YEAR LIMITED WARRANTY For three (3) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of c.
Safety Instructions & Operator's Manual for TWO STAGE INTERMEDIATE FRAME SNOW THROWER SERIES 3 ® IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings.
Safety Instructions & Operator's Manual for TWO STAGE INTERMEDIATE FRAME SNOW THROWER SERIES 3 MODELS 155223 17243 MODEL NUMBER EXPLANATION MODEL DESIGNATION ENGINE HP II Iss122131 I I SERIES DESIGNATION AUGER WIDTH I - Intermediate Frame Model 55 - 5.
IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following instructions may result in serious injury to the operator or other persons.
IMPORTANT SAFETY INSTRUCTIONS OPERATIONAL PRECAUTIONS (Continued From Previous Page) 7. DO NOT put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. 8. Start engine only where exhaust fumes will be safely dissipated.
TABLE OF CONTENTS SECTION 1 - IMPORTANT SAFETY INSTRUCTIONS .......................... 2-3 TABLE OF CONTENTS ............................................................................ 4 SECTION 2 - OPERATING INSTRUCTIONS ............................
Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check engine oil and add oil as needed to bring level up to the FULL mark. Refer to engine owner's manual for oil specifications 2.
Section 2 - OPERATING INSTRUCTIONS 2.2 STARTING, OPERATION & STOPPING (RECOIL START MODELS) (Go to Page 8 for Electric Start Models) 2.2.1. ENGINE 1. Turn fuel shut off valve to the "ON" position. See Figure 2.3. TURN VALVE TO "ON" POSITION FIGURE 2.
Section 2 - OPERATING INSTRUCTIONS Objects can be thrown by the snow thrower while it is in operation. Thrown objects could cause serious injury to the operator or bystanders. Always wear safety goggles or other suitable eye protection. Keep people and pets away from area.
Section 2 - OPERATING INSTRUCTIONS 2.2 STARTING, OPERATION & STOPPING (ELECTRIC START MODELS) (Go to Page 6 for Recoil Start Models) DO NOT use an electrical extension cord that is damaged. A damaged electrical extension cord could cause a shock or fire.
Section 2 - OPERATING INSTRUCTIONS WARNING Objects can be thrown by the snow thrower while it is in operation. Thrown objects could cause serious injury to the operator or bystanders. Always wear safety goggles or other suitable eye protection. Keep people and pets away from area.
Section 3 - MAINTENANCE DO NOT attempt any adjustments, maintenance, service, or repairs, with engine running. Stop auger. Stop engine. Remove key. Disconnect spark plug wire and secure wire away from spark plug. 3.1 INTRODUCTION To retain the quality of the snow thrower, use only genuine SNAPPER replacement parts.
Section 3 - MAINTENANCE 3.4 ANNUALLY (END OF EACH SEASON) Perform all maintenance as described in the maintenance schedule. 3.4.1. Engine Refer to engine owner's manual for service instructions. 3.4.2. Spark Plug Refer to engine owner's manual for service instructions.
Section 4 - REPAIR & ADJUSTMENTS DO NOT attempt any adjustments, maintenance, service, or repairs, with engine running. Stop auger. Stop engine. Remove key. Disconnect spark plug wire and secure wire away from spark plug. 4.1 AUGER and WHEEL DRIVE BELT ADJUSTMENT/REPLACEMENT When operating machine release the auger clutch control.
Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any adjustments, maintenance, service, or repairs, with engine running. Stop auger. Stop engine. Remove key. Disconnect spark plug wire and secure wire away from spark plug. Before tilting machine, drain all the fuel from fuel tank.
Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any adjustments, maintenance, service, or repairs, with engine running. Stop auger. Stop engine. Remove key. Disconnect spark plug wire and secure wire away from spark plug. Before tilting machine, drain all the fuel from fuel tank.
Section 4 - REPAIR & ADJUSTMENTS 4.1.5. GROUND SPEED ADJUSTMENT NOTE: It is recommended to remove the drive system cover and check rubber drive tire engagement with drive disc when adjusting ground speed. 1. Tilt machine forward to gain access to drive system area.
Section 4 - REPAIR & ADJUSTMENTS 4.1.8. SINGLE HANDLE CONTROL ADJUSTMENT (7 HP Models Only) IMPORTANT: Standing in the operator's position, the left handle bar lever is for wheel drive engagement and disengagement. The right handle bar lever is for auger/impeller engagement and disengagement.
Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any adjustments, maintenance, service, or repairs, with engine running. Stop auger. Stop engine. Remove key. Disconnect spark plug wire and secure wire away from spark plug. Before tilting machine, drain all the fuel from fuel tank.
PROBLEM Engine Will Not Start Using Recoil Starter Engine Will Not Start Using Electric Starter Engine Stalls or Stops After Running Engine Loses Power Excessive Vibration Poor Snow Discharging TROUBLESHOOTING 1. 2. 3. 4. 1 2. 3. 1 2. 3. 4. 5. 1 2. 3.
3 YEAR LIMITED WARRANTY For three (3) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of c.
Safety Instructions & Operator's Manual for TWO STAGE INTERMEDIATE FRAME SNOW THROWER SERIES 3 ® IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings.
An important point after buying a device Snapper 155223 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper 155223 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper 155223 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper 155223 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper 155223 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper 155223, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper 155223.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper 155223. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper 155223 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
