Instruction/ maintenance manual of the product VP6700 SMK-Link
Go to page of 16
Page 1 User’s Manual Rechargeable Wireless Present er Mouse.
Page 2 Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 3 Consult the dealer or an experienced radio/TV technician for help. Notice: Any changes or modications not expressly approved by the party responsible for compliance could void the user ’ s authority to operate the equipment. Extension cables are not recommended, if used, they must be shielded in order to comply with the emission limits.
Page 4 System Requirements Hardware: 2 available USB ports Operating System: W indows 2000, XP or V ista Macintosh OS X or above (Mouse Mode fully compatible; F5 and Application Switch in Presenter Mo.
Page 5 Open the battery compartment by pressing down the cover latch located at the end of the mouse. Please note that the micro USB receiver dongle also stores in this compartment when traveling. Insert the two supplied AAA rechargeable Ni-MH batteries (included in the package) to the battery slots.
Page 6 Charging the Batteries It’ s recommended that you fully charge the batteries before initial use; nevertheless the mouse is functional anytime during charging. Plug the USB connector of the charging cable (included in the box) into the computer ’ s available USB port.
Page 7 of the batteries. The mouse is operational during charging; you can continue use the mouse while charging it via the USB charge cable. The mouse is designed with a sleep mode to save power . When the mouse is inactive for approximately 10 minutes it will automatically shot off the optical sensor .
Page 8 Connecting the Mouse to the Computer Retrieve the micro USB receiver dongle stored inside the battery compartment by opening the battery door as shown in Installing the Rechargeable Batteries section. Close the door . Connect the micro USB receiver dongle to an available USB port on your computer .
Page 9 The radio frequency (RF) codes are factory preset for your convenience; the mouse should be functional at this point. If for any reason the mouse does not function correctly , i.e. no cursor movements or sluggish cursor movements, there may be other wireless devices in the vicinity operating in the same radio frequency channel.
Page 1 0 Using the Presenter Mouse W orking in mouse mode – the sliding door on the top is closed The mouse functions as a standard 3-button mouse: right click, left click and the scroll wheel as the 3rd button. The mouse goes to sleep mode to save battery power after approximately 10 minutes of inactivity .
Page 11 W orking in presenter mode – the sliding door in open position Open the sliding door by pressing on the top cover with 2 thumbs and gently glide the door toward the back of the mouse, away from the 2 mouse buttons, until it stops and clicks.
Page 12 Operating T ips & T rouble Shooting Make sure the mouse is turned on by checking the on/off switch located at the bottom of the mouse before using it. Conserve the battery power by switching the on/off switch to “off” position while traveling or if the mouse will not be in use for awhile.
Page 13 ashing for power-low; and follow the instructions in Charging the Batteries section to rechar ge the batteries. The mouse is functional during char ging.
Page 1 4 either repair or replace it with a more current or upgraded model if the originally purchased model is not available. This warranty does not cover products which have been subjected to misuse.
Page 15 Laser W arning The LASER button located under the sliding door of the presenter mouse activates a laser which emits a red laser beam from the front of the presenter mouse unit. It is typically used as a pointer during presentations. The laser beam emits for the duration that you press the button.
Page 1 6 T hank Y ou Thank you for purchasing the Rechargeable W ireless Presenter Mouse. W e know you had other choices and we appreciate that you chose Interlink Electronics W ireless Presenter Mouse by SMK-LINK for your product needs. So that we may better serve you in the future, please register online at www .
An important point after buying a device SMK-Link VP6700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SMK-Link VP6700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SMK-Link VP6700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SMK-Link VP6700 you will learn all the available features of the product, as well as information on its operation. The information that you get SMK-Link VP6700 will certainly help you make a decision on the purchase.
If you already are a holder of SMK-Link VP6700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SMK-Link VP6700.
However, one of the most important roles played by the user manual is to help in solving problems with SMK-Link VP6700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SMK-Link VP6700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
