Instruction/ maintenance manual of the product VP4910 SMK-Link
Go to page of 12
User s Manual VP49 1 0.
FCC Certication This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Introduction Over view Congratulations on your purchase of the VP4910 RemotePoint™ Jade Green Laser Presentation Remote. The VP4910 of fers full 360 o mouse control with patented click-trigger support, programmable buttons, and the brightest laser in its class.
Inst allation Adding or Changing Batteries Open the battery compartment by pressing down on the latch. Insert the batteries per the diagram on the remote. Standard AA alkaline batteries are recommended. Using the USB Base Station An optional USB Base Station is provided for xed installations.
Pairing the Receiver The receiver and remote come pre-paired at the factory . The remote will automatically adjust frequencies and channels to ensure reliable communication. Should you have any problem with communication, you can re-pair them by plugging the USB receiver into the AutoRF Port on the back of the remote.
Familiarizing Y ourself with the Controls Navigation Ring 360 o Mouse Click T rigger Lef t Click Button 1 Next Slide Prev Slide Right Click Button 2 Button 3 Button 4 Laser Aut o RF Pairing Port Page .
Default Control Mouse Control Move the 360 degree mouse by moving the mouse button in the center of the navigation ring in the direction you wish to move. Left Click: Use the button on the Click-T rigger TM on the bottom of the remote. Right Click: Use the bottom button on the navigation ring to right click.
Using the Laser Pointer Press the button on the top of the ring to activate the laser pointer . The laser pointer can be used to highlight important points on slides and graphs. Because the laser emits a green beam it will appear much brighter than a standard laser beam.
Custom Progr amming VP49 10 R emote The four buttons on the bottom of the VP4910 can be programmed to send a wide variety of keystrokes. The software is available online at http://www .interlinkelectronics.com/support/downloads.html The remote can also be programmed to meet your own needs.
Product Specications Laser: 532 nm Green Class II Laser Range: 150 ft Omni-Directional Range Frequency: Auto RF 64k unique addressess 2.4 GHz Radio Frequency Features: Full 360 o Mouse PowerPoint Slide Control 4 Programmable Buttons Battery T ype: 2 x AA Batteries Size: 38 mm (W) x 160 mm (L) x 27.
For Product Suppor t Please Cont act 546 Flynn Road Camarillo, CA 93012 USA TEL 888 696 3500 F AX 805 484 5997 INTERLINKELECTRONICS.COM.
Thank you for purchasing a VP4910 RemotePoint™ Jade Green Laser Presentation Remote. W e know you had other choices and we appreciate that you chose Interlink Electronics for your wireless needs. So that we may better serve you in the future, please register online at www .
An important point after buying a device SMK-Link VP4910 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SMK-Link VP4910 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SMK-Link VP4910 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SMK-Link VP4910 you will learn all the available features of the product, as well as information on its operation. The information that you get SMK-Link VP4910 will certainly help you make a decision on the purchase.
If you already are a holder of SMK-Link VP4910, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SMK-Link VP4910.
However, one of the most important roles played by the user manual is to help in solving problems with SMK-Link VP4910. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SMK-Link VP4910 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
