Instruction/ maintenance manual of the product 100 Smith Corona
Go to page of 16
Instruction Manual Designs and specifications are subject to change without notice. Wordsmith 100 ELECTRONIC TYPEWRITER.
2 PARTS DESCRIPTION TOP COVER PLA TEN POWER SWITCH PRINT CARRIER PRINT BAIL PRINT COVER PLA TE FUNCTION PLA TE FUNCTION KEYBOARD P APER RELEASE LEVER POWER SWITCH PRINT WHEEL PRINT WHEEL RELEASE LEVER.
3 KEYBOARD LAYOUT ( * ) is ‘CODE FUNCTION’. Hold down the ‘CODE’ key and press the appro- priate key to activate these functions. 1 1. * MARGIN RELEASE 1 2. * IMPRESSION SET 1 3. * LINE SP ACE 1 1 4. * LINE SP ACE 1-1/2 1 5. * LINE SP ACE 2 1 6.
4 CONTENTS CONNECT POWER ............................................................................................. 4 Setting ....................................................................................................................... 4 CHANGING .
5 CONNECT POWER Power cord is located in the compartment located at the rear of the typewriter . And the power switch is located on the right side of typewriter near the rear . 1) Pull down the rear compartment door and connect the power cord to a proper AC outlet.
6 CHANGING Changing The Ribbon Cassette 1) Move the print carrier to the center of the platen using the SP ACE or BS key . 2) Hold the ribbon cassette on both sides and lift up the front portion (where the ribbon is exposed) to remove the cassette.
7 Changing The Correction Tape 1) Move the print carrier to the center of the platen using the SP ACE or BS key . 2) T o replace the correction tape, lift out the typing ribbon cassette (see Changing The Ribbon Cassette) and remove the two spools of the lift off tape by pulling them outwards.
8 BASIC FEATURES Selecting Pitch There are three pitches available for typing: PICA (10) : 10 characters per inch CODE + 6 ELITE (12) : 12 characters per inch CODE + 7 MICRO (15) : 15 characters per inch CODE + 8 Selecting Line Spacing There are three line spacing settings available when the appropriate key is depressed.
9 Shift and Shift Lock T o type uppercase characters or symbols, press either the left or right SHIFT key . For continuous uppercase typing, press the LOCK key . T o release the shift lock, press the SHIFT key . Caps Lock T o type the uppercase characters or lowercase symbols continuously , press the CODE + CAPS key .
10 Automatic Return In auto return mode, the carrier will return automatically every time the SP ACE bar or the HYPHEN key is pressed in the hot zone. T o activate auto return, press the CODE + AUTO key . And to cancel auto return, press the CODE + AUTO key again.
11 OTHER FEATURES Tab T o set a tab, move the carrier to the desired position and press the T AB S key . T o clear a tab, move the carrier to the tab position to be cleared and press the CODE + T AB C key . T o clear all tab position, press the CODE + T AB C key for half a second.
12 Right Margin Flush Y our typewriter can automatically print the text flush with the right margin. 1) Press the CODE + 0 (RMF) key . The carrier will move to the right margin. 2) T ype the text. The carrier will be backspaced one space. 3) T o print the text, press the RETURN , T AB or CODE + DEC T AB key .
13 Underlining In this mode, all characters will be automatically underlined. • Continuous Underline T o activate, press the CODE + U key . All text will be automatically underlined. T o cancel, press the CODE + U key again. • Word Underline T o activate, press the CODE + W key .
14 TROUBLE SHOOTING If any operating difficulties arise, check the list below before returning your typewriter for service. 1. T ypewriter remains at a stand with the - Make sure the power cord is still power switch set to on.
15 SPECIFICATION - P APER WIDTH 12” (305mm) - PRINTING WIDTH 9” (229mm) - DAISY WHEEL 100 spokes - PRINTING SPEED up to 12 cps - PRINTING PITCH 10, 12, 15 - LINE SP ACE 1, 1 1/2, 2 - CORRECTION ME.
16 Smith Corona Corporation 842 Bennie Road P .O. Box 2090 Cortland, NY 13045-2090 1-800-448-1018 7300947.
An important point after buying a device Smith Corona 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smith Corona 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smith Corona 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smith Corona 100 you will learn all the available features of the product, as well as information on its operation. The information that you get Smith Corona 100 will certainly help you make a decision on the purchase.
If you already are a holder of Smith Corona 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smith Corona 100.
However, one of the most important roles played by the user manual is to help in solving problems with Smith Corona 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smith Corona 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
