Instruction/ maintenance manual of the product SE1055MFB Smeg
Go to page of 24
Contents GB 27 1. Preliminary instructions ___________________________________ 29 1.1 D ISPOSING OF PACKAGING __________________________________ 30 1.2 D ISPOSING OF OLD APPLIANCES ______________________________ 30 2. Description of controls ____________________________________ 31 2.
GB Introduction 28 Thank you for having preferred our product. From now on we feel sure you will enjoy creatively using your new oven. We recommend you carefully read the instructions in this manual. A lot of room has been given to the best and most correct way of using the oven.
Preliminary instructions GB 29 1. Preliminar y instructions WE ADVISE YOU READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USING THE OVEN. THIS APPLIANCE HAS BEEN DESIGNED FOR THE FOLLOWING PURPOSES: - COOKING AND HEATING FOOD - ANY OTHER USE IS TO BE CONSIDERED IMPROPER.
GB Preliminary instructions 30 WHEN THROWING AWAY AN OLD APPLIANCE, AL WAYS MAKE SURE ANY PARTS WHICH COULD INJURE PERSONS OR DAMAGE THINGS ARE RENDERED HARMLESS. NEVER ALLOW THE OVEN TO BE USED BY CHILDREN W ITHOUT ADULT SUPERVISION. DURING THE AUTOMATIC CLEANING CYCLE (PYROLYSIS) THE OUTER DOOR WINDOW COULD BECOME HOTTER THAN NORMAL.
Description of controls GB 31 2. Description of controls 2.1 F RONT CONTROL PANEL All the oven controls are grouped together on the front panel. STATIC MODEL 8-FUNCTIONS MODEL THERMOSTAT INDICATOR LIGHT When this light comes on, the oven is heating up.
GB Description of controls 32 THERMOSTAT KNOB Cooking temperature is selected by turning the knob clockwise to the desired setting, between 50 and 280 °C.
Description of controls GB 33 2.2 E LECTRONIC PROGRAMMER ( CERTAIN MODELS ONLY ) LIST OF FUNCTIONS MINUTE-COUNTER KEY END-OF-COOKING KEY COOKING TIME KEY TIME BACK KEY TIME FORWARD KEY MANUAL OPERATION KEY 2.2.1 Clock adjustment When using the oven for the first time, or after a power failure, the display flashes regularly and indicates .
GB Description of controls 34 NOTE : BEFORE SETTING THE PROGRAMMER ACTIVATE THE DESIRED FUNCTION AND TEMPERATURE. 2.2.2 Semiautomatic cooking Use this setting for automatic oven switch-off at the end of cooking time. By pressing key , the display lights up, showing ; keep the key pressed and at the same time, press keys or to set the cooking time.
Description of controls GB 35 2.2.5 Adjusting alarm volume The acoustic alarm has three different settings. These can be operated, while the alarm is sounding, by pressing key . 2.2.6 Switching off the alarm The alarm switches off automatically after seven minutes.
GB Description of controls 36 2.3 C LOCK AND PROGRAMMER ( CERTAIN MODELS ONLY ) IMPORTANT : THE KNOB A MUST ALWAYS BE TURNED ANTICLOCKWISE . 2.3.1 Setting the clock To set the correct time, PRESS and turn knob A anticlockwise. NOTE : BEFORE SETTING THE PROGRAMMER ACTIVATE THE DESIRED FUNCTION AND TEMPERATURE.
Using the oven FR 37 3. Using the oven 3.1 W ARNINGS AND GENERAL ADVICE Before using the oven for the first time, pre-heat it to maximum temperature (280°C) long enough to burn any manufacturing oily residues which could give the food a bad taste. After a power failure, the display will flash at regular intervals showing .
GB Available accessories 38 4. Available accessories The oven features 4 support positions for plates and racks of different height. NOTE : SOME MODELS DO NOT FEATURE ALL ACCESSORIES. Baking plate for cakes or biscuits. Tubular rack : for cooking food on plates, small cakes, roasts or food requiring light grilling.
Available accessories GB 39 Chromium-plated tubular gripper for removing hot racks and plates from the oven. The chromium-plated tubular gripper is a very useful accessory in the kitchen. Besides firmly gripping plates and racks, it prevents direct contact (avoiding the use of oven gloves and fabric pot-holders).
GB Cooking hints 40 5. Cooking hints 5.1 T RADITIONAL COOKING FUNCTION SWITCH 50 - 280 °C THERMOSTAT SELECTOR SWITCH - 50-280°C This traditional cooking system where heat flows from both above and below is suitable for cooking food on one level only.
Cooking hints GB 41 This system is ideal for cooking different types of food (fish, meat, etc.,) on more than one level without spreading of smell or taste. The circulation of air in the oven ensures uniform heat. No preheating is required. Multiple cooking is possible as long as the cooking temperature of the different foods is the same.
GB Cooking hints 42 5.5 D ELICATE COOKING FUNCTION SWITCH 50 - 280 °C THERMOSTAT SELECTOR SWITCH - 50-280°C Ideal for pastries and cakes with wet covering and little sugar and damp desserts in moulds. Excellent results can also be achieved in completing cooking at the bottom and with dishes requiring heat in the lower area in particular.
Cooking hints GB 43 5.7 S PIT ROASTING (certain models only) FUNCTION SWITCH MAX. THERMOSTAT SWITCH AT MAXIMUM This is an energy saving-cooking system. Place the food at the centre of the plate or rack and cook as indicated in para. 5.3 “ Grill cooking ”.
GB Recommended cooking table 44 6. Recommended cooking table Cooking times, especially meat, vary according to the thickness and quality of the food and to consumer taste.
Recommended cooking table GB 45 HOT-AIR COOKING FOOD LEVEL FROM BELOW TEMPERATURE (°C) TIME IN MINUTES FIRST COURSES Lasagne Oven-baked pasta Creole rice 2 2 2 190 - 210 190 - 210 190 - 220 20 - 25 2.
GB Maintenance and cleaning 46 7. Maintenance and cleaning 7.1 E NAMELLED PARTS Wait for the oven to cool, take out all the removable parts and proceed to wash with water and regular detergent. Dry and replace components. For cleaning enamelled parts, never use abrasive products, metal wire sponges or sharp objects so as not to damage the surface.
Maintenance and cleaning GB 47 Before proceeding, check the following: • remove all the accessories from the oven (some of them will not withstand heat and become damaged and/or deformed); • remov.
GB Maintenance and cleaning 48 ON - ON 300 °C OFF 500 °C OFF 300 °C 7.4.3 Setting the automatic cleaning cycle with the electronic programmer FUNCTION SWITCH MINIMUM DURATION OF CLEANING CYCLE: 1 hour 30 min.
Maintenance and cleaning GB 49 7.4.4 Setting the cleaning cycle with the programmer clock FUNCTION SWITCH DURATION OF CLEANING CYCLE Position the function selector knob on symbol : the thermostat indicator light will come on. Turn the knob A anticlockwise to set duration of pyrolysis in window B .
GB Extraordinary maintenance 50 8. Extraordinar y maintenance Periodically, the oven will require small maintenance operations or the replacement of parts subject to wear like seals, light bulbs, etc. Below are some specific instructions for maintenance jobs of this type.
An important point after buying a device Smeg SE1055MFB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg SE1055MFB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg SE1055MFB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg SE1055MFB you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg SE1055MFB will certainly help you make a decision on the purchase.
If you already are a holder of Smeg SE1055MFB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg SE1055MFB.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg SE1055MFB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg SE1055MFB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
