Instruction/ maintenance manual of the product SC170 Smeg
Go to page of 25
Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE _______________ 29 2. INSTALLATION _________________________________________ 31 3. DESCRIPTION OF CONTRO LS ____________________________ 34 4. USE OF THE OVEN ______________________________________ 40 5.
Introduction 1. INSTRUCTIONS FOR SA FE AND PR OPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN A N ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE OVEN. WE ADVISE CAREFUL READING OF THIS MANUAL AN D ALL THE INSTRUCTIONS THEREIN BEFORE USING THE OVEN.
Introduction ALWAYS CHECK THAT THE CONTROL KNOBS ARE IN THE “ZERO” (OFF) POSITION WHEN YOU FINISH USING THE OVEN. NEVER PUT INFLAMMABLE OBJECTS IN THE OVEN: THEY COULD BE ACCIDENTALLY LIGHTED AND CAUSE FIRES. DURING USE THE APPLIANCE BECOMES VERY HOT.
Instructions for the installer 2. INST ALLA TION 2.1 Electrical connection Check that mains volta ge and power cable ratings are as per the indications provided on the la bel attached to the oven door frame.
Instructions for the installer 32 2.2 Mounting the oven The oven is de signed for mounting into any piece of furniture as long as heat-resistant. Proceed accor ding to the dimensions s hown in Figures 1 , 2 and 3 . For installing under a work top, follow the dime nsions given in Figure 1 - 3 .
Instructions for the installer Never use the oven door to lever the oven into place when fitting. Avoid exerting too much pres sure on the oven door when open.
Instructions for the user 34 3. DESCRIPTION OF CONTROLS 3.1 Front control panel All the oven controls are grou ped together o n the front panel. The user has only to press the central key for 1 - 2 seconds to enable use of the oven on first use or after a power blackout.
Instructions for the user FUNCTIONS SWITCH KNOB Turn the knob in either direction to select a functio n from the following: FUNCTION SWITCH KNOB Rotate the knob in either direction to select desired f.
Instructions for the user 36 3.2 Electronic Analogue Clock (on some models only) LIST OF FUNCTIONS MINUTE-MINDER BUTTON AUTOMATIC SWITCH-OF F TIMING BUTTON TIME SETTING AND RESET VALUE DECREASE BUTTON VALUE INCREASE BUTTON 3.
Instructions for the user 3.2.2 Minute-minder This function does not stop cookin g but just triggers the beeps. - When the key is pressed the display illuminates, appearing as s hown in figure 1; 1 2 - Press the or keys within 6/7 seconds to set the minute-minder.
Instructions for the user 38 3.2.3 Programming Cooking duration time: the 2 nd button can be used to set the cooking time. Before setting it, turn the thermostat to the cook ing temperature of choice and the function selector knob to any setting.
Instructions for the user Cooking start: as well as setting a cook ing duration time, the user can also set the cooking start time (up to 12 hours after the current time). To set the cooking start/end time, proceed as follows. - Set the cooking duration time as describ ed in the previous point.
Instructions for the user 40 4. USE OF THE O VEN In models equipped with an alogue digital timer, the user has only t o press the central key for 1/2 seconds to enable use of the oven on first use or after a power blackout.
Instructions for the user 4.2 Cooling system (on some models only) The oven features cooling f an which switch on together with the oven. Fan operation causes a n ormal flow of air which exits at the bottom part of th e oven front which may continue for a brief period of time even after the oven has been turned off.
Instructions for the user 42 5. A V AILABL E A CCESSORIES The oven features 4 support positions for plates and racks of different height. Grill: useful for holding cooking vessels. Plate grill: for placing above plate for cooking foods that might drip.
Instructions for the user 6. COOKING HINTS In fan-assisted mode preheating s hould be carried o ut at 30/40°C above the cooking temperature. This consi derably shortens cooking times and reduces power consumption, as well as giving better cooking results.
Instructions for the user 44 Multiple cooking is possi ble as long as the cooking tempe rature of the different foods is the same. 6.3 Grill cooking FUNCTION SWITCH THERMOSTAT SWITCH . Permits rapid browning of foods. You are advised to place the pan in the highest guide.
Instructions for the user 6.5 Recommended cooking table Cooking times, especially m eat, vary according to the thickness and quality of the food and to consumer taste.
Instructions for the user 46 HOT-AIR COOKING LEVEL FROM BELOW TEMPERATURE (°C) TIME IN MINUTES FIRST COURSES LASAGNE OVEN-BAKED PASTA CREOLE RICE 2 2 2 190 - 210 190 - 210 190 - 220 20 - 25 25 - 30 2.
Instructions for the user 7. CLEANING AND MAINTENANCE Before performing any operat ions requiring access to powered parts, switch off the pow er supply to the machine. 7.1 Cleaning stainless steel To keep stainless steel in good cond ition it should be cleaned regularl y after use.
Instructions for the user 48 • DO NOT USE A STEAM JET FOR CLEANING THE INSIDE OF THE OVEN. • Clean the oven gril l and side guides with hot water and non-abrasiv e detergent.
Instructions for the user 7.3 Removing the door 7.3.1 Removing doors with mobile hinges With the door completely o pen, lift the levers A until they touch the hinges B and take hold of the two si des of the door with both hands close to the hinges. Raise the door to an angle of about 45° and r emove it.
Instructions for the user 50 7.4 Removing the door glazing The glass in the door should always be kept thoroughly clean. For easier cleaning, the door glazi ng can be fully removed by proceeding as described below. After blocking the do or in position as described in point “ 7.
Instructions for the user Warning: before removing the panes of glass, make sure that the do or has been locked in open pos ition as described in point “ 7.3 Remov ing the door . This operation might have to be repeated durin g the removal process if the door is accidentally freed.
Instructions for the user 52 8. EXTRA ORDINAR Y MAINTENANCE The oven may require extraordin ary maintenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations.
An important point after buying a device Smeg SC170 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg SC170 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg SC170 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg SC170 you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg SC170 will certainly help you make a decision on the purchase.
If you already are a holder of Smeg SC170, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg SC170.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg SC170. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg SC170 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
