Instruction/ maintenance manual of the product 10135XX1 Axor
Go to page of 8
Installation Instructions / W arranty Axor Starck 10135XX1.
2 Installation Considerations For best results, Hansgrohe recommends that this unit be installed by a licensed, profes- sional plumber . Please read over these instruc- tions thoroughly before begin- ning installation. Make sure that you have all tools and supplies needed to complete the instal- lation.
3 Installation Instructions Push the valve up through the hole in the mounting surface. Thread the mounting ring with o-ring on as far as it will go. Rest the valve on the countertop. Tighten the tensioning screws. Install the escutcheons with o-rings.
4 Place the spout assembly with sealing ring on the mount- ing surface. Install the fiber washer , metal washer , and mounting nut. Make sure that the spout assembly stands straight. T ighten the tensioning screws. Use the 3/8" compression fittings to install the connec- tion hoses to the valve outlets.
5 Install the pop-up drain Remove the plunger assembly . Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. W rap the threads with two layers of T eflon tape and replace. Install the white, flexible sealing gasket to the flange.
6 Replacement Parts 1 aerator 95387XX0 2 handle 96318XX0 3 color ring 96319000 4 escutcheon 97285XX0 5 cold cartridge 94008000 6 fixation set 13961000 7 snap connector 94184000 8 pull rod 96657XX0 9 3.
7 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com US - Installation Instructions • Part No.
An important point after buying a device Axor 10135XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axor 10135XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axor 10135XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axor 10135XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Axor 10135XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Axor 10135XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axor 10135XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Axor 10135XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axor 10135XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
